GANTER Cross Clamps

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Two-way connector clamps / Aluminium / GN 132 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 132 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	25.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Two-way connector clamps / Aluminium / GN 131 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 131 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	21.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Two-way connector clamps

  GANTER

  The clamping bores of GN 131 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	45.94 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  T-angle connector clamps / Aluminium / GN 192 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 192 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	26.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Angle connector clamps

  GANTER

  The clamping bores of the angle connector clamps GN 196 are specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	61.18 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Flanged two-way connector clamps, multi part assembly

  GANTER

  The clamping bores of the flanged two-way connector clamps GN 141 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The square designs are also suitable for use in profile systems.
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	48.34 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Two-way connector clamps / Aluminium / GN 133 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 133 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	25.64 €
  	Special price
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Two-way connector clamps, multi part assembly, same bore dimensions

  GANTER

  The clamping bores of GN 134 flanged two-way con-nector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The versions with square bores are also suitable for profile systems.
  
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	36.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  GN 191 T-angle connector clamps, Aluminium

  GANTER

  The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	21.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 131.1 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 131.1 linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	45.92 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 131.2 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	47.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 135.1 / 2, with 4 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 135.1 Linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
  The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
  The square s2 of the linear actuator connector is supplied not machined in the standard design.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	121.54 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-T-angle connector clamps

  GANTER

  The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912.They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	45.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle connector clamps / Aluminium / GN 194 / 2, with 4 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 194 T-angle connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The versions with square bores are also suitable for profile systems.
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	42.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle connector clamps / Aluminium / GN 195 / 2, with 6 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 195 T-angle connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The versions with square bores are also suitable for profile systems.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	61.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle linear actuator connectors, Stainless Steel

  GANTER

  GN 191.1 Stainless Steel-T-angle linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	133.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 134.1 / 2, with 4 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 134.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
  The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
  The square s2 of the linear actuator connector is supplied not machined in the standard design.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	88.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Linear Actuator Connectors / NI, Stainless Steel / GN 131.1 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 131.1 Stainless Steel-Linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	134.84 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear Actuator Connectors / NI, Stainless Steel / GN 131.2 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  Stainless Steel-Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	208.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle connector clamps / Aluminium / GN 193 / 2, with 4 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 193 T-angle connector clamps are not machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The versions with square bores are also suitable for profile systems.
  
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	37.24 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle linear actuator connectors, Aluminium

  GANTER

  T-angle linear actuator connectors GN 191.1 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	47.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Two-way connector clamps, multi part assembly, unequal bore dimensions

  GANTER

  The clamping bores of GN 135 two-way connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square designs are also suitable for use in profile systems.
  The bore holes and squares must be put together such that an adaptation between between different tube cross-sections is possible.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	49.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...