Push-Pull Toggle Clamps（Page 6）

?* Information on days to ship and prices

• 

  Latch clamps with locking mechanism / GN 858

  GANTER

  GN 858 latch-type toggle clamps are used when very high retaining forces are required.
  The latch-type clamp also features a locking mechanism which prevents the inadvertent or vibration-induced opening of the clamp.
  Another benefit of this clamp is the ability to operate it with one hand.
  Catch is included.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	221.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Latch clamps with trigger function

  GANTER

  The outstanding feature of GN 854 latch-type toggle clamps is their highly robust, sturdy and compact design, allowing their use under demanding conditions, e.g. exposure to high temperatures, dust, spray mist, etc.
  The specially designed catch allows the forced loosening of the clamping by the clamping arm moving the U-bolt latch forward, e.g. for separating mold halves.
  Catch with bore (coding 1) are operated with a gear lever handle which is plugged into the latch and pulled off after operation. This saves space and has the added advantage that the gear lever handle is not exposed to adverse ambient conditions, e.g. becoming too hot to operate. The gear lever handle is not included in the delivery.
  The catch can also be attached using screws or bolts.
  If required, clamps and catches are also available as separate parts; for replacement, the bearing pin is easily dismantled.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	75.52 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Vertical hook type toggle clamps

  GANTER

  The stroke of the U-bolt latch of GN 851.1 hook type toggle clamps can be adjusted within its range.
  In the clamped position the U-bolt latch with clamping arm is perpendicular to the clamping arm and the plane of the operating handle.
  In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.1 series.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Pull Action Latch Clamps 311

  DESTACO

  Destaco’s 301 and 311 Series pull action latch clamps feature fixed stop capability to automatically limit handle travel at various clamping positions. The 301 Series is also available in stainless steel. Common applications and uses include - molding, assembly, and closures for doors, lids, or covers.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	93.03 €
  Min. Shipping Days ：	45 Days

  *Unit price with basic configuration

• 

  Pull Action Latch Clamps 353

  DESTACO

  Destaco’s 353 Series pull action latch clamps are heavy duty cast steel clamps designed for the harshest environments and suited for parting line clamping of rotational molds. These clamps are equipped with replaceable stainless steel pivot pins. Common applications include – molding and closures for doors, lids, or covers.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	86.35 €
  Min. Shipping Days ：	45 Days

  *Unit price with basic configuration

• 

  Pull Action Latch Clamps 374

  DESTACO

  The clamp is mounted perpendicular to the latch surface. Ideal for latching applications on molds, doors, lids, access covers, drums, containers, vessels

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	234.31 €
  Min. Shipping Days ：	30 Days

  *Unit price with basic configuration

• 

  Squeeze-Action Clamps 325

  DESTACO

  Destaco’s 325 Series squeeze action plier clamps are designed for attachment by welding or using mounting holes and are available in stainless steel. Common applications for these squeeze clamps include molding, closures for doors, lids, and covers.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	198.28 €
  Min. Shipping Days ：	30 Days

  *Unit price with basic configuration

• 

  Straight Line Action Clamps 614

  DESTACO

  Destaco’s 614 Series straight line action clamps feature an optional single hold threaded mount or side mount. This model’s precision hardened and ground plunger is designed for anti-rotation under torsional loads. It also locks in the extended or retracted position, with internal locking in the push direction. Common applications for these clamps include assembly, fixture checking, and locaters/positioners.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	407.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Straight Line Action Clamps 650

  DESTACO

  Destaco’s 650 Series straight line action clamps are designed for heavy duty push/pull clamping and to allow the handle to rotate and fall below the mounting plane to lock in retracted position. These clamps feature a forged steel base and handle. They are also the largest of our straight line clamps. Common applications for these clamps include assembly, welding, tensioning devices, and staking/light presswork.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	237.96 €
  Min. Shipping Days ：	30 Days

  *Unit price with basic configuration

• 

  Straight Line Action Clamps 670 and 690

  DESTACO

  Destaco’s 670 and 690 Series straight line action clamps feature precision clamping for high production, adjustable collet-type bushing that minimizes radial plunger movement, and plunger with a flat surface for anti rotation. These clamps are also designed with pre-load nut and hold open device. Common applications are assembly and welding projects.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	662.39 €
  Min. Shipping Days ：	20 Days

  *Unit price with basic configuration

• 

  Variable Stroke Straight Line Action FL-Series

  DESTACO

  Destaco‘s FL Series variable stroke, straight line clamps are used in applications where workpiece thicknesses and workpiece tolerances vary. These clamps are suitable for clamping between ribs and hollow spaces that are difficult to reach. Compact design and different types of operation allow for application of the straight line clamps in fixtures for mass production as well as for single part production. FL models feature a front flange mounting type and can be operated with one or two hands.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	420.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Variable Stroke Straight Line Action FO-Series

  DESTACO

  Destaco‘s FO Series variable stroke, straight line clamps are used in applications where workpiece thicknesses and workpiece tolerances vary. These clamps are suitable for clamping between ribs and hollow spaces that are difficult to reach. Compact design and different types of operation allow for application of the straight line clamps in fixtures for mass production as well as for single part production. FO models feature a flange base foot mounting type and can be operated with one or two hands.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	363.41 €
  Min. Shipping Days ：	20 Days

  *Unit price with basic configuration

• 

  Variable Stroke Straight Line Action F-Series

  DESTACO

  Destaco‘s F Series variable stroke, straight line clamps feature a high holding capacity, high side load capacity, and wiper ring that helps avoid contamination of the clamping mechanism. The aluminum housing leads to a lower weight unit, while the block style base provides variable mounting options.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	733.12 €
  Min. Shipping Days ：	20 Days

  *Unit price with basic configuration

• 

  Variable Stroke Straight Line Action G-Series

  DESTACO

  Destaco‘s G Series variable stroke, straight line clamps are used in applications where workpiece thicknesses and workpiece tolerances vary. These clamps are suitable for clamping between ribs and hollow spaces that are difficult to reach. Compact design and different types of operation allow for application of the straight line clamps in fixtures for mass production as well as for single part production. G models feature a through hole mounting type and can be operated with one or two hands.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	364.18 €
  Min. Shipping Days ：	20 Days

  *Unit price with basic configuration

• 

  6844ESD ESD Push-Pull Type Toggle Clamp

  AMF

  ESD push-pull type toggle clamp
  · With protective cap and handle made of electrostatic conductive (dissipative) material.
  · Short version. For push and pull-clamping. Long rod-guide with attaching thread and nut.
  · Galvanised and passivated. Piston rod is made of non-rusting steel. Shoulder screws tempered. Bearing positions are greased.
  · Ergonomic, oil-resistant handle with large grip surface and soft components.
  · Complete with tempered, galvanised clamping screw No. 6880ESD.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	56.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini push-pull toggle clamp with mounting bracket (K1545)

  KIPP

  · Locking in both closed and open positions
  
  · Used for thrust and traction
  
  · For particularly tight spaces
  
  · Compact construction (mini)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.86 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Push-pull toggle clamp with mounting bracket (K1546)

  KIPP

  · Locking in both closed and open positions
  
  · Used for thrust and traction
  
  · Can be mounted in any position using the fastening nut

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Toggle clamps mini push-pull Form A (K0745)

  KIPP

  · Toggle clamps and power clamps are used in assembly and workholding fixtures
  
  · Application sectors: machine construction, welding technology, metal processing, woodworking, plastics industry
  
  · Locking in both closed and open positions
  
  · Used for thrust and traction
  
  · For particularly tight spaces

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Toggle clamps mini push-pull Form B (K0745)

  KIPP

  · Toggle clamps and power clamps are used in assembly and workholding fixtures
  
  · Application sectors: machine construction, welding technology, metal processing, woodworking, plastics industry
  
  · Locking in both closed and open positions
  
  · Used for thrust and traction
  
  · For particularly tight spaces

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Toggle clamps push-pull with mounting bracket (K0085)

  KIPP

  · Toggle clamps and power clamps are used in assembly and workholding fixtures
  
  · Application sectors: machine construction, welding technology, metal processing, woodworking, plastics industry
  
  · Locking in both closed and open positions
  
  · Used for thrust and traction
  
  · Can be mounted in any position using the fastening nut

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Toggle clamps push-pull without mounting bracket (K0086)

  KIPP

  · Toggle clamps and power clamps are used in assembly and workholding fixtures
  
  · Application sectors: machine construction, welding technology, metal processing, woodworking, plastics industry
  
  · Locking in both closed and open positions
  
  · Used for thrust and traction
  
  · Can be mounted in any position using the fastening nut

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.89 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Toggle clamps push-pull without mounting bracket (K1440)

  KIPP

  [Specifications]
  ・Body Material: Steel
  ・Surface finish body: galvanised and passivated
  ・Component material: Plastic
  ・Component colour: red
  
  Toggle clamps push-pull without mounting bracket.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	56.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Black Handle, 6840T

  AMF

  Push-pull type toggle clamp with black handle
  without angle base. For push- and pull-clamping.
  (Equal operation of rod and lever).
  Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and rod of tempered steel. Bearings are pre-lubricated. Push-pull toggle clamp with threaded front for direct mounting in vertical metal plates or in fixtures. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Black Handle, 6841NIT

  AMF

  Push-pull type toggle clamp with black handle
  with small angle base. For push- and pull-clamping.
  (Equal operation of rod and lever). Stainless steel, polished. Long rod-guide with attaching thread and nut. Bush for size 3. Bearings pre-lubricated. Lever can be set to any angle relative to base. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Supplied complete with stainless clamping screw no. 6880NI.
  Also suitable for use in the food industry.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	78.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Black Handle, 6841T

  AMF

  Push-pull type toggle clamp with black handle
  with small angle base. For push- and pull-clamping.
  (Equal operation of rod and lever).
  Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and rod of tempered steel. Bearings are pre-lubricated. Lever can be set to any angle relative to base. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Black Handle, 6842T

  AMF

  Heavy-duty push-pull type toggle clamp with black handle
  For push and pull-clamping.
  (Equal operation of rod and lever). Heavy-duty version with long rod-guide. Base (body) made of malleable cast iron, varnished. Lever parts and push rod made of tempered steel, galvanized and passivated. Rivets made of stainless steel, which, for size 3, run in hardened bearing bushes. Bearing positions are greased.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw
  no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	115.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Black Handle, 6844NIT

  AMF

  Push-pull type toggle clamp with black handle
  short version. For push and pull-clamping.
  Stainless steel, polished. Long rod-guide with attaching thread and nut. Shoulder screws pasted into thread. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Supplied complete with stainless clamping screw no. 6880NI.
  Also suitable for use in the food industry.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	99.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Black Handle, 6844T

  AMF

  Push-pull type toggle clamp with black handle
  short version. For push- and pull-clamping.
  Long rod-guide with attaching thread and nut.
  Galvanized and passivated. Stainless steel rivet. Shoulder screws tempered. Bearings are pre-lubricated.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Blue Handle, 6840E

  AMF

  Push-pull type toggle clamp with blue handle
  without angle base. For push- and pull-clamping.
  (Equal operation of rod and lever).
  Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and rod of tempered steel. Bearings are pre-lubricated. Push-pull toggle clamp with threaded front for direct mounting in vertical metal plates or in fixtures. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Blue Handle, 6841E

  AMF

  Push-pull type toggle clamp with blue handle
  with small angle base. For push- and pull-clamping.
  (Equal operation of rod and lever).
  Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and rod of tempered steel. Bearings are pre-lubricated. Lever can be set to any angle relative to base. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Blue Handle, 6841NIE

  AMF

  Push-pull type toggle clamp with blue handle
  with small angle base. For push- and pull-clamping.
  (Equal operation of rod and lever). Stainless steel, polished. Long rod-guide with attaching thread and nut. Bush for size 3. Bearings pre-lubricated. Lever can be set to any angle relative to base. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Supplied complete with stainless clamping screw no. 6880NI.
  Also suitable for use in the food industry.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	78.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Blue Handle, 6842E

  AMF

  Heavy-duty push-pull type toggle clamp with blue handle
  For push and pull-clamping.
  (Equal operation of rod and lever). Heavy-duty version with long rod-guide. Base (body) made of malleable cast iron, varnished. Lever parts and push rod made of tempered steel, galvanized and passivated. Rivets made of stainless steel, which, for size 3, run in hardened bearing bushes. Bearing positions are greased.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw
  no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	115.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Blue Handle, 6844E

  AMF

  Push-pull type toggle clamp with blue handle
  short version. For push- and pull-clamping.
  Long rod-guide with attaching thread and nut.
  Galvanized and passivated. Stainless steel rivet. Shoulder screws tempered. Bearings are pre-lubricated.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Blue Handle, 6844NIE

  AMF

  Push-pull type toggle clamp with blue handle
  short version. For push and pull-clamping.
  Stainless steel, polished. Long rod-guide with attaching thread and nut. Shoulder screws pasted into thread. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Supplied complete with stainless clamping screw no. 6880NI.
  Also suitable for use in the food industry.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	99.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Yellow Handle, 6842Y

  AMF

  Heavy-duty push-pull type toggle clamp with yellow handle
  For push and pull-clamping.
  (Equal operation of rod and lever). Heavy-duty version with long rod-guide. Base (body) made of malleable cast iron, varnished. Lever parts and push rod made of tempered steel, galvanized and passivated. Rivets made of stainless steel, which, for size 3, run in hardened bearing bushes. Bearing positions are greased.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw
  no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	115.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Green Handle, 6841NIG

  AMF

  Push-pull type toggle clamp with green handle
  with small angle base. For push- and pull-clamping.
  (Equal operation of rod and lever). Stainless steel, polished. Long rod-guide with attaching thread and nut. Bush for size 3. Bearings pre-lubricated. Lever can be set to any angle relative to base. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Supplied complete with stainless clamping screw no. 6880NI.
  Also suitable for use in the food industry.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	78.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Green Handle, 6842G

  AMF

  Heavy-duty push-pull type toggle clamp with green handle
  For push and pull-clamping.
  (Equal operation of rod and lever). Heavy-duty version with long rod-guide. Base (body) made of malleable cast iron, varnished. Lever parts and push rod made of tempered steel, galvanized and passivated. Rivets made of stainless steel, which, for size 3, run in hardened bearing bushes. Bearing positions are greased.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw
  no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	115.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Green Handle, 6844G

  AMF

  Push-pull type toggle clamp with green handle
  short version. For push- and pull-clamping.
  Long rod-guide with attaching thread and nut.
  Galvanized and passivated. Stainless steel rivet. Shoulder screws tempered. Bearings are pre-lubricated.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Green Handle, 6844NIG

  AMF

  Push-pull type toggle clamp with green handle
  short version. For push and pull-clamping.
  Stainless steel, polished. Long rod-guide with attaching thread and nut. Shoulder screws pasted into thread. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Supplied complete with stainless clamping screw no. 6880NI.
  Also suitable for use in the food industry.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	99.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Orange Handle, 6840J

  AMF

  Push-pull type toggle clamp with orange handle
  without angle base. For push- and pull-clamping.
  (Equal operation of rod and lever).
  Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and rod of tempered steel. Bearings are pre-lubricated. Push-pull toggle clamp with threaded front for direct mounting in vertical metal plates or in fixtures. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Orange Handle, 6841J

  AMF

  Push-pull type toggle clamp with orange handle
  with small angle base. For push- and pull-clamping.
  (Equal operation of rod and lever).
  Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and rod of tempered steel. Bearings are pre-lubricated. Lever can be set to any angle relative to base. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Orange Handle, 6841NIJ

  AMF

  Push-pull type toggle clamp with orange handle
  with small angle base. For push- and pull-clamping.
  (Equal operation of rod and lever). Stainless steel, polished. Long rod-guide with attaching thread and nut. Bush for size 3. Bearings pre-lubricated. Lever can be set to any angle relative to base. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Supplied complete with stainless clamping screw no. 6880NI.
  Also suitable for use in the food industry.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	78.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Orange Handle, 6842J

  AMF

  Heavy-duty push-pull type toggle clamp with orange handle
  For push and pull-clamping.
  (Equal operation of rod and lever). Heavy-duty version with long rod-guide. Base (body) made of malleable cast iron, varnished. Lever parts and push rod made of tempered steel, galvanized and passivated. Rivets made of stainless steel, which, for size 3, run in hardened bearing bushes. Bearing positions are greased.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw
  no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	115.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Orange Handle, 6844J

  AMF

  Push-pull type toggle clamp with orange handle
  short version. For push- and pull-clamping.
  Long rod-guide with attaching thread and nut.
  Galvanized and passivated. Stainless steel rivet. Shoulder screws tempered. Bearings are pre-lubricated.
  Ergonomic, oil-resistant handle with large grip surface and soft components.
  Complete with tempered, galvanized clamping screw no. 6880.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push-Pull Type Toggle Clamp with Orange Handle, 6844NIJ

  AMF

  Push-pull type toggle clamp with orange handle
  short version. For push and pull-clamping.
  Stainless steel, polished. Long rod-guide with attaching thread and nut. Shoulder screws pasted into thread. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components.
  Supplied complete with stainless clamping screw no. 6880NI.
  Also suitable for use in the food industry.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	99.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...