Guide Elements

?* Information on days to ship and prices

• 

  V Blocks / Precision Class

  MISUMI

  [Features] As for the precision grade block, the pick-up position of the workpiece is checked. [Material] Equivalent to JIS-SKS (TS for cold work)3.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	72.73 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Guides / V-Shaped

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  V Blocks / Standard / T-Shaped

  MISUMI

  [Features] This prism block can be used as a guide or support for round workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	35.87 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Guides / Straight

  MISUMI

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	6 Days

• 

  Guides / L-Shaped

  MISUMI

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	6 Days

• 

  V-Blocks

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	330.12 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Eccentricity Clamp Bolt SLEC-A

  NABEYA BI-TECH

  Bolt clamp for fixing rails for linear guideways / fixing workpieces and jigs.
  [Features]
  ·When tightened, the head of the screw that is eccentric to the axis will clamp the workpieces powerfully.
  ·Due to the wedge effect, a large clamping force can be obtained with a small tightening torque.
  ·Uses a hexalobular hole that can withstand high tightening torque.
  ·Please use the dedicated SKX for installation and removal.
  ·Suitable for fixing rails for linear guideways.
  ·By pressing the rail for the linear guideway against the reference surface, it is easy to obtain accuracy during mounting.
  ·Maintains mounting accuracy by suppressing warpage and misalignment due to long-term use.
  

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	4.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Roller Pushers / Low Particle Generation Type

  MISUMI

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	6 Days

• 

  Eccentric Clamp Bolt SLEC-B

  NABEYA BI-TECH

  ● When tightened, the head of the screw that is eccentric to the axis will clamp powerfully to the workpieces. Due to a wedge effect, a large clamping force can be obtained with a small amount of tightening torque.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	6.14 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Guide Plates

  MISUMI

  [Features] This is a guide plate for guiding workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Guides / Height Adjusting

  MISUMI

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	6 Days

• 

  Guides / Pedestal

  MISUMI

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	6 Days

• 

  Guides/ Angle

  MISUMI

  It has a slotted hole for adjustment and the squareness of 0.05 is guaranteed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	6 Days

• 

  Guides / Plates

  MISUMI

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	6 Days

• 

  Eccentricity Clamp Bolt SLEC-A-EL

  NABEYA BI-TECH

  When tightened, the head of the screw that is eccentric to the axis will clamp the workpieces powerfully.
  [Features]
  ·Due to the wedge effect, a large clamping force can be obtained with a small tightening torque.
  ·Use the dedicated wrench SKX for installation and removal.
  ·Suitable for fixing rails for linear guideways.
  ·The eccentric head attaches the linear guideway rail and presses it against the reference surface, making it easy to obtain accuracy during installation.
  ·In addition, it suppresses warpage and misalignment due to long-term use, and maintains mounting accuracy.
  ·SLEC-A-EL is an electroless nickel plating type.
  ·For applications that require corrosion resistance.
  [Applications]
  ·Fixing rails for linear guideways / fixing workpieces and jigs.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	4.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Butt Straps

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	198.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Slotted Clamping Angles

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	315.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamping Angles, one-sided, welded, semi-finished

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1,419.30 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamping Jaws, for floating clamp M 12 / lower clamping jaw with flat-faced ball and pivot function, plain surface, protected against rotating

  HALDER

  The clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.
  The upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.
  In the upper clamping jaw with female thread M 8 (23320.0154 / .0156 - picture 4 + 5) different standard parts can be screwed in as required.
  The lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.

  Select to compare

  › Configure now
  Starting from∗ ：	140.35 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamping Vices, moveable jaw

  HALDER

  Max. torque 140 Nm, Clamping power F = 30 kN.

  Select to compare

  › Configure now
  Starting from∗ ：	953.91 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs

  HALDER

  Gripper stud for universal gripper set (Art. No. 1702.600).

  Select to compare

  › Configure now
  Starting from∗ ：	35.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Insertable Plates

  HALDER

  Three support heights. For levelling the workpiece on the five-sided machining jaws. Ground to high accuracy. Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600). This product is supplied as a pair.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	176.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Insertion Tools

  HALDER

  Keeps the workpiece in position during the clamping process.

  Select to compare

  › Configure now
  Starting from∗ ：	303.47 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Intermediate Plates

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	136.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Jaws for Five-Sided Machining Sets

  HALDER

  Pull-down elements suitable for clamping and pulling unmachined clamping surfaces down onto the guideway or onto the 90-mm support plates supplied. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the support plates largely reduces vibrations in the workpiece.
  Supplied in handycase consisting of:
  4 x wedge adapters for five-sided machining jaw (Art. No. 1704.410)
  4 x wedge elements, four-point (Art. No. 1703.340)
  4 x wedge elements, Microgripper (Art. No. 1703.350)
  2 x insertable plates (h1=90 mm) (Art. No. 1704.520)
  20 x cheese-head screws M 6 x 8 (Art. No. 1704.600)

  Select to compare

  › Configure now
  Starting from∗ ：	1,436.66 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Jaws, soft

  HALDER

  For self-made special jaws. Chamfer provides very good accessibility to the workpiece.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	198.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Mounting Blocks, V70eco

  HALDER

  V70eco mounting blocks are a further development of the established V70 product line, optimized in quality and price. They are fully compatible with the existing V70 T-slot System.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	245.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Mounting Elements

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	280.97 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Multi-Vices, MS 125eco

  HALDER

  The all-round clamping system is a classic for conventional clamping and gripp clamping. It is suitable for all common milling. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece.
  The MS 125eco is designed for fast machining of unmachined/semi-finished parts as well as of finished products. It is equally suitable for gripp clamping in the first clamping as well as for conventional clamping in the second clamping without refitting. ground jaws for high precision in the machining of workpieces. high-pressure spindle with mechanical power intensifier (operation with torque wrench). up to 40 kN clamping force (linearly increasing, at max. 30 Nm). solid base made of GGG 60, top and bottom surface ground. threats M8 on both sides for workpiece stop. precise alignment slots in the ground bottom surface for an optimal alignment on the machine table
  Scope of supply:
  1 piece MS 125eco. 1 set step jaws for gripper studs. 4 pieces gripper studs, pointed. 4 pieces clamping elements. 3 pieces wrenches
  All components of the product ranges "conventional clamping" and "gripp clamping" as well as the accessories for the Multi-Vice MS 125 are fully compatible to MS 125eco. For horizontal machining Halder basic elements (angles/cubes) can be used.

  Select to compare

  › Configure now
  Starting from∗ ：	2,340.67 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Prismatic Jaws

  HALDER

  For horizontal and vertical clamping of round and flat workpieces. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a two piece.

  Select to compare

  › Configure now
  Starting from∗ ：	605.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Seating Pins

  HALDER

  Five support heights. For levelling the workpiece on the guideway. Ground to high accuracy.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	70.22 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Spacers

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	15.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Standard Ranges EH 1586

  HALDER

  Select to compare

  › Configure now
  Starting from∗ ：	941.07 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Support Jaws, for mounting various gripper studs

  HALDER

  For mounting various gripper studs (Art. No. 1702.710-1702.780) or a universal gripper set (Art. No. 1702.600). For three-point clamping. Front surface can be used as clamping surface (hardened and ground)
  Supplied without gripper studs or gripper sets.

  Select to compare

  › Configure now
  Starting from∗ ：	584.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Supporting Plates, including accessories

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1,872.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Thrust Angles

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	168.08 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wedge Elements

  HALDER

  Select to compare

  › Configure now
  Starting from∗ ：	112.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Lateral Stops

  HALDER

  Select to compare

  › Configure now
  Starting from∗ ：	100.44 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  Supports Clamping Bar, magnetic

  HALDER

  Select to compare

  › Configure now
  Starting from∗ ：	64.30 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  Adjustable Rotating Elements

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	737.44 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Aligning and Fixing Sets

  HALDER

  For aligning (positioning) and fastening the vice on the machine table.
  Size according to T-slot or thread in the machine table.

  Select to compare

  › Configure now
  Starting from∗ ：	179.77 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Jaws, hard

  HALDER

  One side smooth and ground, one side serrated. Additional threads for parallels and for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the smooth side. Mountings for click system (Art. No. 1701.190-1701.200) on both sides of the jaw.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	407.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Jaws, soft

  HALDER

  Jaws of case hardened steel. For self-made special jaws. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a pair.

  Select to compare

  › Configure now
  Starting from∗ ：	410.09 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Plates, semi-finished

  HALDER

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	911.68 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Plates, V70eco

  HALDER

  V70eco base plates are a further development of the established V70 product line, optimized in quality and price.
  They are fully compatible with the existing V70 T-slot System.
  • Centers to H6 tolerance and slots to H8 tolerance.
  • Alignment of the base plate on the machine table by means of centers and/or centering slot.
  • Fastening holes on a 100 mm pitch.
  • High tensile tool steel.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2,130.63 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...