EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.

Adjuster Pads

Filter products by: Selected Product

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Leveling feet, foot / threaded stud Stainless Steel

GANTER

The static load of the levelling feet GN 343.6 is limited by the laod capacity of the Stainless Steel ball joint with threaded stud (AISI 303).
The static load values in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loadting or angular loading is not uncommon and the load capacity would be considerable reduced which must be taken into consideration.
Levelling feet GN 343.6 cannot be disassembled.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	13.28 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Leveling Mounts / Standard Type

MISUMI

Space saving type leveling mount. When mounted directly on the aluminum extrusion, the pad does not protrude from the outer dimensions.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Min. Shipping Days ：	Same day

Levelling feet with threaded stud, Steel

GANTER

The static load of the levelling feet GN 343.2 is limited by the load capacity of the ball joint with threaded stud (tensile strength class 5.8 (500 N/mm2)).
The static load values (only valid for Type OS / KS) in the above table refer to a net vertical load in relation to the levelling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.
Levelling feet GN 343.2 cannot be disassembled.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	6.18 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Levelling feet

GANTER

GN 31 Stainless Steel-Levelling feet with vulcanised rubber (Type B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to clean.
Stainless Steel-Levelling feet GN 31 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	11.88 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling elements, Steel

GANTER

Levelling elements GN 355 are used for levelling and adjustment in machines and equipment.
They consist of a levelling screw, a cylinder screw with disk and a spherical washer. After making the adjustment using the assembly tools GN 355.1 available as accessory, the screw is tightened firmly causing the levelling screw and the spherical washer DIN 6319 underneath to spread and is so secured against twisting in the taphole.
The values for w and x given in the table and for the static load capacity are to be seen as reference values which may differ depending on the prevailing situation. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	16.58 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Ball jointed levelling feet, Plastic, Stainless Steel

GANTER

Ball jointed levelling feet GN 638 feature a smaller size ball diameter than the trunk of the threaded stud. As a result the studs can be screwed into position from the ball side. The ball end can easily be hammered in and also dismantled.
Details regarding the static load capacity have been established by a series of tests but are indicative only. For these tests the loads have been placed vertically and centrally over the stud. At the measured load of 3,5 kN there was no remaining deformation visible on the thrust pad nor was there any breakage.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	2.36 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet, Steel

GANTER

Levelling feet GN 30 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	9.98 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Levelling feet with mounting lug, with and without rubber underl

GANTER

Stainless Steel-Levelling feet GN 43 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	7.00 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Anchors for Aluminum Extrusions

MISUMI

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	10.40 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet with mounting lug

GANTER

Levelling feet GN 32 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	10.10 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Levelling feet, with and without rubber underlay

GANTER

Stainless Steel-Levelling feet GN 41 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	5.80 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Anchors / Heavy Type

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	19.43 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Anchor Stands / Sheet Metal

MISUMI

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	8.69 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Levelling feet

GANTER

Stainless Steel-Levelling feet GN 23 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	49.70 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet with vibration absorbing

GANTER

The specified load in the above table is a recommendation up to which the damping insert can be permanently subjected.
This static load equals a thrust on the area of 0,4 N/mm2, at which the damping material reaches its optimum dynamic damping ability. This also takes into account an additional load up to 0,6 N/mm2 in the event of a dynamic load.
Levelling feet GN 342.2 cannot be disassembled.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	14.44 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Leveling Mount Unit

MISUMI

Unit for mounting levelling feet for aluminium extrusions. Set of adjusters, plates, screws and nuts.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	10.57 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Ball Type Adjuster

YUKI LABORATORY

[Features]
· The swivel mechanism also supports distorted floor surfaces.

[Note]
· When the solvent resistance of the floor coating is low, the rubber of the adjuster may stick to the floor and lose its adhesive.
· The foot is a fit-in type, so it may become detached. Press-fit again if it comes off.

2D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	9.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Levelling feet, foot plastic / threaded bushing steel

GANTER

Levelling feet GN 343.3 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.
Exceeding the static values specified in the above table could lead to failure of the plastic component.
The above values have been arrived at by a series of load tests whereby a defined number of levelling feet were subjected to a vertical load over a defined period.
Levelling feet GN 343.3 are supplied assembled, but are removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	2.64 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet, threaded bushing steel

GANTER

Levelling feet GN 343.1 cannot be disassembled.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	5.78 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling sets with spherical washer

GANTER

Levelling sets GN 350.2 are used for levelling, adjusting and linking operations. The spherical washer allows precise installation of two non parallel planes at a required gradient up to ≈ 4°.
They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	47.88 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stainless Steel-Levelling feet

GANTER

Stainless Steel-Levelling feet GN 21 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	47.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Stainless Steel-Spherical levelling washers

GANTER

Stainless Steel-Spherical levelling washers GN 350.3 have been designed to match the levelling sets GN 350, GN 350.1, GN 350.2 and GN 350.5.
The two spherical washers are used together „undetachably“.
The load bearing capacity of these spherical washers is relatively high. This is not only due to the material quality but also to the matched sphere of the concave „pan“.
Furthermore it is recommended using high-strength washers for bridging d2.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	25.44 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Leveling Mounts / Space Saving Type

MISUMI

Standard type leveling mount. Sizes from M5 to M20 are available.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	10.40 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Leveling Foot

NIC AUTOTEC

[Features] 95 mm long, 60 mm wide.

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	4.33 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Ball jointed levelling feet, Plastic / Steel

GANTER

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	2.06 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Bull´s eye levels

GANTER

Bull´s eye levels GN 2277 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
The spirit levels are aligned in relation to the reference surface so that the bubble is located inside the marking ring when the horizontal position of the contact surface is achieved.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	12.78 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet, threaded bushing Stainless Steel

GANTER

Levelling feet GN 343.7 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.
Exceeding the static values specified in the above table could lead to failure of the plastic component.
The above values have been arrived at by a series of load tests whereby a defined number of levelling feet were subjected to a vertical load over a defined period.
Levelling feet GN 343.7 are supplied assembled, but are removable.

The static load of the levelling feet GN 343.7 / GN 343.8 is limited by the load capacity of the Stainless Steel ball joint (AISI 303). The static load values in the above table refer to a net vertical load in relation to the
levelling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.
Levelling feet GN 343.7 / GN 343.8 cannot be disassembled.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	3.66 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling sets, Steel (GN 360)

GANTER

GN 360 Levelling sets are used for leveling and to compensate for any slope when setting up machines and systems.The thread d2 can also be used as a through-hole for attachment from below. The fine thread d3 laws precise adjustment and readjustment using a DIN 1810 C-Spanner. A circlip limits the maximum path of adjustment.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	96.86 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Levelling feet with mounting holes, Hygienic Design

GANTER

GN 20 hygienic leveling feet with mounting holes are certified according to EHEDG guidelines and are therefore ideal for use in hygienic applications.
The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be screwed on using the mounting holes and compressed accordingly. Hygienic fastenings and the correct position of the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball seal, the moving components are sealed against the environment.
The high quality finish prevents adherence of dirt and facilitates cleaning.
The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	160.40 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Stainless Steel-Levelling feet, A4 (GN 44)

GANTER

GN 44 Stainless Steel-Levelling feet are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these levelling feat to be used in every situation.

The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The type B0 can also be fastened to the mounting surface through two holes.

The levelling feet are supplied fully assembled and are not removable.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	6.08 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet with mounting lug, steel sheet, zinc plated, with and without rubber

GANTER

Levelling feet GN 42 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	5.64 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet, foot / threaded bushing Stainless Steel

GANTER

Levelling feet GN 343.5 cannot be disassembled.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	10.84 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Mounts for leveling feet

GANTER

GN 349 mounts are used on levelling feet particularly in such cases where a machine shrouding is made of very thin sheet metal.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	10.56 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Levelling feet with mounting lug

GANTER

Stainless Steel-Levelling feet GN 33 will be delivered mounted and are not removable.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	13.26 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Levelling sets (GN 360)

GANTER

GN 360 Stainless Steel-Levelling sets are used for leveling and to compensate for any slope when setting up machines and systems.The thread d2 can also be used as a through-hole for attachment from below. The fine thread d3 laws precise adjustment and readjustment using a DIN 1810 C-Spanner. A circlip limits the maximum path of adjustment.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	119.54 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Levelling feet for aluminium profiles (K0432)

KIPP

· Especially suitable for tables and light installations

· Equipment foot height is adjusted by turning the nut by hand or spanner

· Compatible with all conventional aluminium profiles with 8 mm or 10 mm slot width

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	7.50 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Levelling feet with vibration absorbing, Steel

GANTER

The specified load in the above table of the levelling feet GN 342.1 is a recommendation up to which the damping element can be permanently subjected.
This static load equals a thrust on the area of 0,4 N/mm2, at which the damping material reaches its optimum dynamic damping ability. This also takes into account an additional load up to 0,6 N/mm2 in the event of a dynamic load.
Levelling feet GN 342.1 can not be disassembled.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	13.44 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet, Steel

GANTER

Levelling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw.
For this reason they offer the advantage of reduced height.
The gliding and/or the non-gliding protective cap is safely fixed in the foot.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	7.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling sets, short version

GANTER

Levelling sets GN 350.1 are used for levelling, adjusting and linking operations if small dimensions are given.
They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	32.70 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Stainless Steel-Levelling elements

GANTER

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	20.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Levelling feet

GANTER

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	12.78 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Levelling feet with fixing lug, Steel, zinc plated, rectangular shape (GN 42)

GANTER

GN 42 levelling feet can be used in a host of combinations of base plates and adjustable spindle versions.
>The levelling feet can be screwed to the mounting surface use the fixing lug, which prevents lateral shifting. Moreover, the types with the rubber underlay protect sensitive surfaces.
The levelling feet are supplied fully assembled and are not removable.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	10.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Anchor Bracket

NIC AUTOTEC

This is an anchor holder for the aluminium extrusion. There are T-shaped and L-shaped types. [Materials]EN 1.0038 Equiv.

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	14.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Rubber Cushion

NIC AUTOTEC

A rubber buffer that absorbs shocks. [Material] (1) SBR (2) EN 1.4016 Equiv.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	5.74 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster

YUKI LABORATORY

Used for levelling the machine base and partition. Compatible with 40 series.

2D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	6.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Selected Product

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	GANTER	MISUMI	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	MISUMI	GANTER	GANTER	MISUMI	MISUMI	GANTER	GANTER	MISUMI	YUKI LABORATORY	GANTER	GANTER	GANTER	GANTER	GANTER	MISUMI	NIC AUTOTEC	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	KIPP	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	NIC AUTOTEC	NIC AUTOTEC	YUKI LABORATORY
Product Series	Leveling feet, foot / threaded stud Stainless Steel	Leveling Mounts / Standard Type	Levelling feet with threaded stud, Steel	Stainless Steel-Levelling feet	Levelling elements, Steel	Ball jointed levelling feet, Plastic, Stainless Steel	Levelling feet, Steel	Stainless Steel-Levelling feet with mounting lug, with and without rubber underl	Anchors for Aluminum Extrusions	Levelling feet with mounting lug	Stainless Steel-Levelling feet, with and without rubber underlay	Anchors / Heavy Type	Anchor Stands / Sheet Metal	Stainless Steel-Levelling feet	Levelling feet with vibration absorbing	Leveling Mount Unit	Ball Type Adjuster	Levelling feet, foot plastic / threaded bushing steel	Levelling feet, threaded bushing steel	Levelling sets with spherical washer	Stainless Steel-Levelling feet	Stainless Steel-Spherical levelling washers	Leveling Mounts / Space Saving Type	Leveling Foot	Ball jointed levelling feet, Plastic / Steel	Bull´s eye levels	Levelling feet, threaded bushing Stainless Steel	Levelling sets, Steel (GN 360)	Levelling feet with mounting holes, Hygienic Design	Stainless Steel-Levelling feet, A4 (GN 44)	Levelling feet with mounting lug, steel sheet, zinc plated, with and without rubber	Levelling feet, foot / threaded bushing Stainless Steel	Mounts for leveling feet	Stainless Steel-Levelling feet with mounting lug	Stainless Steel-Levelling sets (GN 360)	Levelling feet for aluminium profiles (K0432)	Levelling feet with vibration absorbing, Steel	Levelling feet, Steel	Levelling sets, short version	Stainless Steel-Levelling elements	Stainless Steel-Levelling feet	Levelling feet with fixing lug, Steel, zinc plated, rectangular shape (GN 42)	Anchor Bracket	Rubber Cushion	Adjuster
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D
Starting from^∗	13.28 € *Unit price with basic configuration Volume Discount	- Volume Discount	6.18 € *Unit price with basic configuration Volume Discount	11.88 € *Unit price with basic configuration Volume Discount	16.58 € *Unit price with basic configuration Volume Discount	2.36 € *Unit price with basic configuration Volume Discount	9.98 € *Unit price with basic configuration Volume Discount	7.00 € *Unit price with basic configuration Volume Discount	10.40 € *Unit price with basic configuration Volume Discount	10.10 € *Unit price with basic configuration Volume Discount	5.80 € *Unit price with basic configuration Volume Discount	19.43 € *Unit price with basic configuration Volume Discount	8.69 € *Unit price with basic configuration Volume Discount	49.70 € *Unit price with basic configuration Volume Discount	14.44 € *Unit price with basic configuration Volume Discount	10.57 € *Unit price with basic configuration Volume Discount	9.15 € *Unit price with basic configuration	2.64 € *Unit price with basic configuration Volume Discount	5.78 € *Unit price with basic configuration Volume Discount	47.88 € *Unit price with basic configuration Volume Discount	47.74 € *Unit price with basic configuration Volume Discount	25.44 € *Unit price with basic configuration Volume Discount	10.40 € *Unit price with basic configuration Volume Discount	4.33 € *Unit price with basic configuration Volume Discount	2.06 € *Unit price with basic configuration Volume Discount	12.78 € *Unit price with basic configuration Volume Discount	3.66 € *Unit price with basic configuration Volume Discount	96.86 € *Unit price with basic configuration Volume Discount	160.40 € *Unit price with basic configuration Volume Discount	6.08 € *Unit price with basic configuration Volume Discount	5.64 € *Unit price with basic configuration Volume Discount	10.84 € *Unit price with basic configuration Volume Discount	10.56 € *Unit price with basic configuration Volume Discount	13.26 € *Unit price with basic configuration Volume Discount	119.54 € *Unit price with basic configuration Volume Discount	7.50 € *Unit price with basic configuration	13.44 € *Unit price with basic configuration Volume Discount	7.50 € *Unit price with basic configuration Volume Discount	32.70 € *Unit price with basic configuration Volume Discount	20.50 € *Unit price with basic configuration Volume Discount	12.78 € *Unit price with basic configuration Volume Discount	10.60 € *Unit price with basic configuration Volume Discount	14.61 € *Unit price with basic configuration	5.74 € *Unit price with basic configuration Volume Discount	6.89 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	5 Days	5 Days	Same day	Same day	4 Days	5 Days	Same day	Same day	Same day	Same day	Same day	Same day	7 Days	5 Days	Same day	Same day	Same day	Same day	Same day	7 Days	4 Days	Same day	Same day	5 Days	Same day	Same day	7 Days	5 Days	Same day	5 Days
Specifications									Stock				Stock											Stock
Selected Product	-	Leveling Mounts	-	-	-	-	-	-	Anchor	-	-	Anchor	Anchor	-	-	Leveling Mounts	Leveling Mounts	-	-	-	-	-	Leveling Mounts	Leveling Mounts	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Anchor	Leveling Mounts	Leveling Mounts