ideanote
inCAD Library

Make sure to read this before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. MISUMI reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

Features of inCAD Library

  1. Get great new design ideas for these application examples.
  2. Over 200 design application ideas collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! Button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Back to top

inCAD Library Keyword Search
inCAD Library No. Search

No.000185 Conveyor with Strip Brushes

Brushes are used to evenly distribute workpiecs on conveyor line.

Conveyors

Product name Guided Belt/3-Groove Frame/Pulley Dia. 50mm
Part number CVSFD-300-1500-40-T100-SCM-75-D-A-MK
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Choose this item as an completed assembly for product transfer.

Back to page top

Available sizes

■Conveyor with full width belt, Pulley Dia. 50mm

Part Material Surface Treatment
Frame Aluminum : Anodize
Motor Cover Paint
Pulley Holder EN AW-5052 Equiv. : Anodize
EN 1.0038 Equiv. Trivalent Chromate

■Belt Specification

Usage Surface Material Color Tone Continuous Use Temperature °C
General Purpose Polyurethane Green -10°C ~ 80°C
White
Sliding Urethane Impregnated Green
White
Electronic Parts Conveyor Conductive Polyurethane Black
Oil Resistant Oil-Resistant Chloroethylene Navy 5°C ~ 60°C
Non-Adhesive Polyurethane White -10°C ~ 80°C
No Belt

■Sizes

Belt width
(10mm increments)
Distance between pulleys
(5mm increments)
Motor
Output (W) Voltage (V) Specifications Gearhead Reduction Ratio
80 ~ 300 320 ~ 2000 6, 25, 40 * Note 5, 7.5, 9, 12.5, 15, 18,
25, 30, 36, 50, 60, 75,
90, 100, 120, 150, 180

* Voltage and specification of a motor are varied with countries of sales.

Back to page top

Performance info.

■Conveying capacity (Guided belt to prevent lateral movement, single track, pulley dia. 50mm)

Back to page top

Technical calculations

■Conveyor Selection Site

https://uk.misumi-ec.com/contents/mech/product/cvs/

Back to page top

Attachment Brackets for Channel Brushes

Product name Attachment Brackets for Channel Brushes/Vertical Mount
Part number BRUSAS5
Features MISUMI original design Channel Brush Attachment Brackets enabling quick brush changes are provided.
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable for using as a brush to even out the workpiece

Back to page top

Available sizes

■Dedicated attachment brackets for channel brushes - Vertical mount

Body Material Insert material Accessory
MC nylon, conductive grade (black) EN 1.4301 Equiv. Screw (EN 1.4301 Equiv.)

■Sizes

Overall thickness
of the applicable brush
Applicable Channel Brush External Dimensions Brush fixing part Base fixing part
Width Depth Height Applicable screw (included) Applicable screw
3N BRUSN3 (Nylon 6) 50 18 15 M4 M5
BRUSM3 (conductive nylon Mono-Eight®)
3S BRUSE3 (conductive fiber Thunderon®)
5 BRUSN5 (Nylon 6) 20
BRUSM5 (conductive nylon Mono-Eight®)
5K BRUSK5 (Nylon with Abrasive Grain)

Back to page top

Channel Brush

Product name Channel Brush
Part number BRUSM5-0.3-40-300
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable for using as a brush to even out the workpiece

Back to page top

Available sizes

■Channel Brush

Brush Filament Channel material Color
Nylon 6 EN 1.4301 Equiv. White
Conductive Fiber Thunderon® (Copper Alloy) Silver Green
Conductive Nylon Mono-Eight® Black
Nylon with Abrasive Grain Gray

■Sizes and Dimensions

Brush Filament Overall thickness Wire Dia. Filament length Overall Width Channel
height
(5mm increments) (5mm increments)
Nylon 6 3 Ø0.21 10 ~ 50 30 ~ 800 3.5
Ø0.295
5 Ø0.21 10 ~ 50 5.5
Ø0.295
Ø0.535 15 ~ 50
Conductive Fiber Thunderon® (Copper Alloy) 3 Ø0.075 10 ~ 30 3.5
Conductive Nylon Mono-Eight® 3 Ø0.3 10 ~ 50 3.5
5 5.5
Nylon with Abrasive Grain 5 Ø0.6 10 ~ 50 5.5

Back to page top

Accuracy Info

■Overall width tolerance of the channel brushes

Overall width Tolerance
~ 100 ±1.5
101 ~ 400 ±2.0
401 ~ 800 ±2.5

Back to page top

IDEA NOTE Simple configuration

By using aluminum frame groove, positioning brushes is very easy.

IDEA NOTE Adding a backup plate

Durability is improved by mounting a backup plate to prevent bending of brush filaments.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

  • * Unit assembly CAD data consists of some sub-assemblies.
       Each sub-assembly unit can be used as it is or can be edited.

Application Overview

Purpose

  • Purpose
    • Prevent workpieces from piling up.
  • Operation
    • Detects the workpiece pile-ups with a sensor and using installed brushes breaks apart and evens out the stacked workpieces.

Points for use

  • Easily installed on automatic operated conveyor lines.

Target workpiece

  • Shape: Square connector
  • Size: W40.3 x D31 x H16mm
  • Weight: 40g

Design Specifications

Operating Conditions or Design Requirements

  • Clearance between the brush and the conveyor: 20mm
  • External size: W1595.8 x D375 x H338mm

Other Design Consideration

  • Detects a wide range of workpieces by repositioning photoelectric sensors.
  • Two brushes are used to prevent omission of evening out the workpieces.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Miniature Conveyor (Currently not available) CVSFD-300-1500-40-T100-SCM-75-D-A-MK 1
2 Aluminiumprofile NEFS6-3030-230 4
3 Aluminiumprofile NEFS6-3030-311 2
4 End Caps for Aluminum Extrusion HFC6-3030-S 4
5 Brushes Attachment BRUSAS5 4
6 Brushes BRUSM5-0.3-40-300 2
7 Socket Head Cap Screws-with Washer SCBS3-6 16
8 Socket Head Cap Screws-with Washer SCBS3-8 16
9 Socket Head Cap Screws-with Washer SCBS5-10 8
10 Socket Head Cap Screws-with Washer SCBS6-12 48
11 Nuts For Aluminum Extrusion SHNTU6-5 8
12 Nuts For Aluminum Extrusion SHNTU6-6 20
  • The part list above contains only MISUMI parts.
    The list of parts and machined products of other manufacturers than MISUMI can also be downloaded by part list download (CSV).
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

Back to top