Tightening Fittings（Connection Type：Thread-to-Tube Multipoint Connection）

?* Information on days to ship and prices

• 

  Junlon Stainless Steel Fitting Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	40.18 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert-Less Type Tee

  NITTA

  Three parts: tee fitting body, nut, and sleeve. The effective sectional area is larger without insert.
  
  [Features]
  · Screw-in type.
  · Three parts: fitting body, nut, and sleeve.
  · High flow rate can be secured.
  · It has no insert, making its effective cross-section greater.
  · Only connectors are sealed.
  · Does not require sealing tape.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.29 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Tees

  MISUMI

  The media used are air and water. T-piece with integrated nut and sleeve for pipes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	26.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Corrosion Resistant SUS316 Tighten Fitting Tee

  NIHON PISCO

  All parts are made using SUS316 for excellent corrosion resistance. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	33.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Corrosion Resistant SUS316 Tighten Fitting Branch Tee

  NIHON PISCO

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Header Block CB

  CHIYODA TSUSHO

  A compact header block for use in tight spaces.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	46.14 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Junron Brass Nipple Joint Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.59 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junlon Brass Fitting, Service Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.86 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Service Tee

  JUNKOSHA

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	42.28 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Brass Specifications), Tee (mm Size)

  NITTA

  Brass specification tee (millimeter size) fitting includes three components: the main body, , nuts and sleeve(s) in an integrated package. Also features excellent negative pressure performance.
  
  [Features]
  · Screw-in type.
  · Three parts included: fitting body, nuts and sleeve(s).
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also features excellent performance under negative pressure.
  · Only the connectors are sealed.
  · Does not require sealing tape.
  Compliant with JISB8381-1995 (pipe fitting for a flexible hose for pneumatic use)

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.71 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Service Tee (mm Size)

  NITTA

  It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.76 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Stainless Steel Specifications), Tee (mm Size)

  NITTA

  A 3-point stainless steel specification tee (mm sized) with fitting body, nut, and sleeve.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  ·Excellent sealing performance.
  · Integrated fitting body and insert.
  · Also has excellent performance under negative pressure.
  · Made of SUS304 for excellent corrosion resistance.
  · Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	44.80 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series DK Tube Dedicated Type Tee

  NITTA

  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · Does not require sealing tape.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Service Tee (Inch Size)

  NITTA

  A 3-point brass service tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.02 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Tee (Inch Size)

  NITTA

  A 3-point brass swivel tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chemifit CP Series, Service Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the service tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.19 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Chemifit CP Series, Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.00 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  KFT, Insert Fitting, Male Branch Tee

  SMC

  [Features] Used for branching at 90° angles from female threads on both sides. [Material] -EN CW614N Equiv.+EN CW617N Equiv..

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Insert Fittings KF Series, Male Run Tee KFY

  SMC

  It can be used for branching in the same direction from the internal thread and in 90° direction.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel EN 1.4401 Equiv. Insert Fittings, Male Branch Tee, KFG2T Series

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  · Applicable tube outer diameter: metric p. 324, inches p. 329

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.85 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Fitting (Insertless Tees)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	9.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  DT, Self-align Fitting - Male Branch Tee, Union Tee

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for 90° branch connections in both directions.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  DY, Self-align Fitting - Male Run Tee

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for 90° branch connections in both directions.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.01 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...