Tightening Fittings（Connection Type：Tube-to-Tube Equal Dia. Connection）

?* Information on days to ship and prices

• 

  DE, Self-align Fitting - Bulkhead Union, Bulkhead Connector

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for 90° branch connections in both directions.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  KFG2L-00, Stainless Steel EN 1.4401 Equiv. Insert Fittings, Union Elbow

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  Applicable tube outer diameter, metric p. 325; inch p. 330

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	35.31 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  KFG2H-00, Stainless Steel EN 1.4401 Equiv. Insert Fittings, Straight Union

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  Applicable tube outer diameter, metric p. 324; inch p. 330

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	21.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  KFG2T-00, Stainless Steel EN 1.4401 Equiv. Insert Fittings, Union Tee

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.84 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Union Tees

  MISUMI

  The media used are air and water. T-piece with integrated nut and sleeve for pipes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	31.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DT, Self-align Fitting - Male Branch Tee, Union Tee

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for 90° branch connections in both directions.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  KFG2E-00, Stainless Steel EN 1.4401 Equiv. Insert Fittings, Bulkhead Union

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  Applicable tube outer diameter, metric p. 325; inch p. 330

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	35.31 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Panel Mount

  MISUMI

  The fluids used are air and water. -Nut and socket with integrated built-in fitting for tubes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	21.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Brass Specifications), 90°Union Elbow (mm Size)

  NITTA

  The fitting main body and insert are integral at three points: sleeve, nut, and fitting main body of the 90° union (mm size) with brass specifications. Excellent negative pressure performance.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.22 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  KFH-00, Insert Fitting, Straight Union

  SMC

  [Straight screw connection. [Features] Used for connecting pipes in one direction. [Material] -EN CW614N Equiv.+EN CW617N Equiv..

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.31 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Union

  MISUMI

  The fluids used are air and water. -Nut and sleeve with integrated fitting for tubes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Union Elbows

  MISUMI

  [Features] The media used are air and water. -Nut and sleeve with integrated elbow fitting for tubes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  for Sputtering Resistant, Brass Tightening Fitting, Union Tee

  NIHON PISCO

  Special brass is used for the metal body for greatly-improved corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Corrosion Resistance SUS316 Fastening Fittings Union Elbow

  NIHON PISCO

  All materials use SUS316 for good corrosion resistance.
  
  [Features]
  - All materuals use SUS316 for superior corrosion resistance.
  - No sleeve needed, ensuring you won't lose it or forget to attach it.
  - Purified with clean air and packaged in a Class 1000 clean room.
  - Inch sizes added.
  - Wide selection of variations.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.94 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  for Corrosion Resistance, SUS316 Tightening Fitting, Union Straight

  NIHON PISCO

  All materials use SUS316 to provide excellent rust resistance. *The CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · SUS316, a substance with superior corrosion resistance, was used for all parts.
  · Forgetting to attach and losing a sleeve never happens with the no-sleeve-required design.
  · Purified with clean air and packaged in a Class 1000 clean room .
  · Added inch sizes.
  · Wide selection of products

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  for Corrosion Resistance, EN 1.4401 Equiv. Tightened Fitting, Union Tee

  NIHON PISCO

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.70 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  for Corrosion Resistance - SUS316 Tightening Fitting - Bulkhead Union Straight

  NIHON PISCO

  All materials use SUS316 to provide excellent corrosion resistance.
  
  [Features]
  · SUS316, a substance with superior corrosion resistance, was used in all of the materials.
  · The no-sleeve-required design eliminates issues of forgetting to attach or losing a sleeve.
  · Purified with clean air and packaged in a Class 1000 clean room.
  · Added inch sizes.
  · Wide selection of products.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hose Fitting, Hose Intermediate Fitting

  CHIYODA TSUSHO

  A cap-nut hose intermediate fitting with high pull-out strength.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Junron Brass Fitting Union Tee

  JUNKOSHA

  [Features]
  · The union tees of the metric Series conform to Japanese Industrial Standard JIS B8381 ‘Pneumatic Fittings’.
  · A mechanism where the tube insert is held and fastened by a sleeve and cap nut to create a secure connection
  · The connection will remain intact until the tube breaks.
  · Equipped with a threaded collar thread by R (PT) thread size.
  · Supports compressed air lines, water pressure, and hydraulic pressure.
  

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junlon Brass Fittings - Union Elbow

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.61 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junlon Brass Fittings - Bulkhead Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Select to compare

  › Configure now
  Starting from∗ ：	5.14 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Junron Brass Fitting Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junron Stainless Fitting Union

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.56 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Union Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nuts, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	49.10 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Stainless Fitting Union Elbow

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over tightening of cap nut and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	34.13 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Bulkhead Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.49 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Steel Fittings - US2 Series Union for Flexible Tube

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, cap nuts built into the sleeve that use the unique Junkosha mechanism are employed. The cap nut tightening torque does not require management.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	34.33 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Junron Stainless Fitting US2 Series Union Tee for Flexible Tubes

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, we use cap nuts built into the sleeve that use a unique Junkosha mechanism. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	76.18 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Brass Specifications), Union Connector (mm Size)

  NITTA

  The fitting main and insert are integrated at three points; the sleeve, nut, and fitting part of the brass type union connector (mm size). Also offers excellent negative pressure performance.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame retardant resin (equivalent to UL94 V-0 standards) is used.
  · Incombustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standards, and has excellent self-extinguishing properties.
  · Able to be used in environments prone to spatter.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.85 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Union Tee (mm Size)

  NITTA

  It consists of three parts: brass fitting body of union tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass Specifications) Panel Touch Connector (mm Size)

  NITTA

  Three-item system made up of brass specification panel touch connector (mm size) fitting unit, nuts and sleeves, and integrated fitting unit and insert. Excellent negative pressure performance.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series, Insertion Type (Stainless Steel Specifications), Union Connector (Sized in Millimeters)

  NITTA

  A 3-point stainless steel specification union connector (sized in millimeters) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also shows excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	63.01 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Stainless Steel) 90° Union Elbow (mm Size)

  NITTA

  Stainless steel 90° union elbow (mm size) consisting of three parts: fitting body, nut, and sleeve. The fitting body and insert are integrated. Also shows excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	50.96 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Stainless Steel) Union Tee (Metric Sized)

  NITTA

  Stainless steel union tee (metric sized) that comes as a set of 3 items: Fitting body, nut, and sleeve. The fitting body and insert are integrated. Also shows superb performance at negative pressures.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	69.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series - Insert Less Type - Union Tee

  NITTA

  Consists of three parts: The main body of the union tee, a nut, and a sleeve. The lack of an insert increases the effective sectional area.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.19 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insertless Type Union Tee Connector

  NITTA

  3-point, fitting body of a union connector, nut, and sleeve. The effective sectional area is larger without insert.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.52 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insertsless Type 90° Union Elbow

  NITTA

  Consisting of three parts: fitting body of 90° union elbow, nut and sleeve. The effective sectional area is larger without insert.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.57 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series DK Tube Dedicated Type Union Connector

  NITTA

  3-point, fitting body of a union connector, nut, and sleeve. Dedicated fitting for DK tubes. No need to wrap sealing tape.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.80 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series DK Tube Dedicated Type Union Tee

  NITTA

  It consists of three parts: fitting body of union tee connector, nut, and sleeve. Dedicated fitting for DK tubes. No need to wrap sealing tape.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series, DK Tube Dedicated Type Panel Touch Connector (Nickel Plated Part)

  NITTA

  [Features]
  · Screw-in type.
  · A 3-item set consisting of fitting body of panel touch connector (Nickel-plated product), nut, and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · No need to wrap sealing tape.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.99 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series, DK Tube Type Copper Tube Connection Panel Touch Connector (Nickel Plated Part)

  NITTA

  Consisting of three parts: copper tube connection panel touch connector fitting body (nickel-plated part), nut, and sleeve. Dedicated fitting for DK tubes. No need to wrap with sealing tape.
  
  [Features]
  · Panel touch type fitting that connects DK tubes and copper tubes.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.00 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Stainless Steel) Union Connector (Inch Size)

  NITTA

  A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.81 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series - Insert Type (Stainless Steel) - Union Tee (Inch Size)

  NITTA

  A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  Select to compare

  › Configure now
  Starting from∗ ：	37.98 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass Specifications) 90° Union Elbow (Inch Size)

  NITTA

  3 item system made up of brass specification 90° union elbow (inch size) fitting unit, nuts and sleeves, and the fitting unit and insert are integrated. Also, it is excellent in negative pressure performance.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Noncombustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, has superior self-extinguishing properties.
  · Able to use in the environment that sputtering occurs.
  · There is no need to wrap the R threads with seal processing tape

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Union Connector (Inch Size)

  NITTA

  A 3-point union connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.80 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...