Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Screw-Hole-Related Tools（Screw Types：Unified）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.61 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap HT (Cutting Tap)

YAMAWA MFG

Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	18.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	9.91 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless EX-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap for Stainless Steel SU+SP / SU-SP

YAMAWA MFG

Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.55 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Hand Tap Series, for General, HT

OSG

High speed steel hand tap.
Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.25 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series, Tin Coated, TIN-NRT

OSG

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.03 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Select to compare

Configure now
Starting from^∗ ：	31.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 200 Cutting Tap with Spiral Point

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.52 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap PO(N-PO)

YAMAWA MFG

A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.26 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.73 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Thread Cutting Tool (for Unified Threads) MMTU

NS TOOL

[Features]
・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.
・ Adopts MUGEN Coating Premium for the realization of a long life.
・ For Unified Standard threads

Select to compare

Configure now
Starting from^∗ ：	108.22 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 400 Forming Tap

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK CoroMill Plura Solid Carbide End Mill for Thread Milling

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

OSG

The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	139.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insert Screw Tap Series, Hand Tap HL-HT

OSG

Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, General Long Shank, EX-LT

OSG

Long shank type.
Tool material: vanadium high-speed steel
Working material: general steel / cast iron / aluminium / copper.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.54 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series NC-Planet Cutters WX-PNC

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	158.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series For Stainless Steel Use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.64 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series IT New Roll IT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series For Non-Ferrous Alloy B-HRT

OSG

Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hand Tap - Metric Unified Thread Screw (60° Angle)

SKC

Used for General Tapping

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.60 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable Solid Die_for Unified Screws UNC

SKC

A female tool that's used to cut male threads

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Adjustable Solid Die_for Unified Screws UNF

SKC

A female tool that's used to cut male threads

Select to compare

Configure now
Starting from^∗ ：	20.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel Point Tap SU+PO / SU-PO

YAMAWA MFG

Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.63 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Dry Processing Roll Tap OL+RZ / OL-RZ

YAMAWA MFG

It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.96 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

High Performance Roll Tap HP+ RZ / HP-RZ

YAMAWA MFG

It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Unified Screw (UN)

CARMEX

For internal threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole UN

CARMEX

For unified screws and inner diameter screws.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

CARMEX

For internally threaded unified screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Select to compare

Configure now
Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid for Outer Diameter, Mill Thread UN

CARMEX

For unified screws and outer diameter screws.

[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutes

Select to compare

Configure now
Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole

CARMEX

With internal coolant hole, up to screw depth D1 x 2.

[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.

Select to compare

Configure now
Starting from^∗ ：	304.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hard Cut UN

CARMEX

[Features]
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.

Select to compare

Configure now
Starting from^∗ ：	218.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.28 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Solid Die D for Unified Threads (Fine)

YAMAWA MFG

[Features]
· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.
[Applications]
· Work material: Iron, light metals.
· For male thread machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	56.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Solid Die D for Unified Threads (Coarse)

YAMAWA MFG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	63.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SU Roll Tap SURZ

YAMAWA MFG

[Features]
· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
· Demonstrates effectiveness for roll tap machining of stainless steel.
· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.08 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid Die (For Left-Handed Threads) D LH for Unified Threads

YAMAWA MFG

Select to compare

Configure now
Starting from^∗ ：	127.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 100 Cutting Tap with Straight Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	YAMAWA MFG	OSG	OSG	YAMAWA MFG	OSG	OSG	OSG	SANDVIK	OSG	OSG	YAMAWA MFG	SANDVIK	OSG	NS TOOL	SANDVIK	SANDVIK	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SKC	SKC	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	SANDVIK
Product Series	Point Tap Series, for General, EX-POT	Hand Tap HT (Cutting Tap)	Spiral Tap Series, General Purpose EX-SFT	Spiral Tap Series, for Stainless EX-SUS-SFT	Spiral Tap for Stainless Steel SU+SP / SU-SP	Hand Tap Series, for General, HT	Groove-Free Tap Series, Tin Coated, TIN-NRT	Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT	SANDVIK CoroTap 200 Cutting Tap with Spiral Point	A Tap Series for Pipes Point Tap A-POT	A Tap Series, Spiral Tap, A-SFT	Point Tap PO(N-PO)	SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes	Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT	Thread Cutting Tool (for Unified Threads) MMTU	SANDVIK CoroTap 400 Forming Tap	SANDVIK CoroMill Plura Solid Carbide End Mill for Thread Milling	Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC	Insert Screw Tap Series, Hand Tap HL-HT	Point Tap Series, General Long Shank, EX-LT	Planet Cutter Series NC-Planet Cutters WX-PNC	Point Tap Series For Stainless Steel Use EX-SUS-POT	Groove-Free Tap Series IT New Roll IT-NRT	Groove-Free Tap Series VP New Roll VP-NRT	Groove-Free Tap Series For Non-Ferrous Alloy B-HRT	Hand Tap - Metric Unified Thread Screw (60° Angle)	Adjustable Solid Die_for Unified Screws UNC	Adjustable Solid Die_for Unified Screws UNF	Stainless Steel Point Tap SU+PO / SU-PO	Dry Processing Roll Tap OL+RZ / OL-RZ	High Performance Roll Tap HP+ RZ / HP-RZ	Carbide Solid Mill Thread Unified Screw (UN)	Carbide Solid Mill Thread with Oil Hole UN	For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw	Carbide Solid for Outer Diameter, Mill Thread UN	DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole	Hard Cut UN	Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S	Solid Die D for Unified Threads (Fine)	Solid Die D for Unified Threads (Coarse)	SU Roll Tap SURZ	Solid Die (For Left-Handed Threads) D LH for Unified Threads	SANDVIK CoroTap 100 Cutting Tap with Straight Flutes
Starting from^∗	9.61 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.10 € *Unit price with basic configuration	9.91 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.88 € *Unit price with basic configuration Volume Discount	17.55 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.25 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	22.03 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	31.24 € *Unit price with basic configuration	-	19.29 € *Unit price with basic configuration Volume Discount	19.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.26 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	-	24.73 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	108.22 € *Unit price with basic configuration	-	-	139.70 € *Unit price with basic configuration Volume Discount	12.11 € *Unit price with basic configuration Volume Discount	31.54 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	158.30 € *Unit price with basic configuration Volume Discount	10.64 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.73 € *Unit price with basic configuration Volume Discount	23.13 € *Unit price with basic configuration Volume Discount	15.30 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.60 € Special price *Unit price with basic configuration Promotional pricing	20.03 € Special price *Unit price with basic configuration Promotional pricing	20.03 € Special price *Unit price with basic configuration Promotional pricing	17.63 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	35.96 € *Unit price with basic configuration Volume Discount	24.43 € *Unit price with basic configuration Volume Discount	229.39 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	304.42 € *Unit price with basic configuration	218.26 € *Unit price with basic configuration	41.28 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	56.94 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	63.63 € *Unit price with basic configuration	42.08 € *Unit price with basic configuration Volume Discount	127.94 € *Unit price with basic configuration	-
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	8 Days	Same day	6 Days	6 Days	5 Days	6 Days	6 Days	Same day	5 Days	6 Days	6 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	Same day	Same day	8 Days	8 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	Same day	6 Days	8 Days	6 Days	5 Days
Specifications		Stock	Stock
Screw Types	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified	Unified
Screw size (Nominal)	No0UN ～ No12UN	No.10-24UNC	1UN ～ No12UN	1UN ～ No10UN	No.10-32UNF ～ 7/16-20UNF	No0UN ～ No12UN	No0UN ～ No12UN	No2UN ～ No6UN	UNC 1" ～ UNF 12	1/2-20UNF ～ №10-24UNC	1-8UNC ～ №10-24UNC	No.10-32UNF ～ 3/8-24UNF	UNC 1" ～ UNF 12	No2UN ～ No6UN	NO.0-80UNF ～ 1/4-20UNC	UNC 1" ～ UNC 12	UNC 1 ～ UNF 10	-	No8UN	3/8UN	-	1UN ～ No10UN	No2UN ～ No4UN	No2UN ～ No6UN	No2UN	No0UN ～ No12UN	5/16UN	3/8UN ～ 7/16UN	No.10-32UNF ～ 5/16-18UNC	No.10-32UNF ～ 1/4-20UNC	No.2-56UNC ～ M10	-	-	-	-	-	-	1UN ～ No12UN	No.10	No.6	No.4	9/16	UNC 1/2 ～ UNF 7/16
Pitch (P), Number of Threading(mm)	6 ～ 80	-	5 ～ 48	8 ～ 48	-	12 ～ 80	20 ～ 80	32 ～ 56	-	-	-	-	-	32 ～ 56	-	-	-	32	32	16	12 ～ 28	8 ～ 48	40 ～ 56	32 ～ 56	56	28 ～ 80	18	20 ～ 24	-	-	0.25 ～ 1.5	-	-	-	-	-	-	4.5 ～ 64	32	32	-	-	-
Chamfer threads (Lcf)	5P	5P	2.5P	2.5P	2.5P	1.5P ～ 9P	2P ～ 4P	2P ～ 4P	-	5P	2.5P	5P	-	1P	-	-	-	-	5P	5P	-	4P	2P	2P ～ 4P	2.5P	1.5P ～ 5P	-	-	5P	4P	2P ～ 4P	-	-	-	-	-	-	-	-	-	2P	-	-
Tool Material Type	Vanadium High-Speed Steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	-	Powder high-speed steel	Powder high-speed steel / Vanadium High-Speed Steel	High-speed steel	-	Powder high-speed steel	Carbide	-	-	Carbide	High-speed steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	-	-	-	-	Powder high-speed steel	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Alloy HSS	High-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	-
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-
Tap Type	Point tap	Hand Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Roll tap	Roll tap	-	Point tap	Spiral Tap	Point tap	-	Roll tap	Thread cutter	-	-	Thread cutter	Hand Tap	Hand Tap	Thread cutter	Point tap	Roll tap	Roll tap	Roll tap	Hand Tap	Die	Die	Point tap	Roll tap	Roll tap	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Die	Die	Die	Roll tap	Die	-
Hole type	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	-	For through hole	For blind hole	For through hole	-	For blind hole	For blind hole	-	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For blind hole	-	-	-	For through hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	For blind hole	-	-	-	For blind hole	-	-
Coating Y/N	N/A	N/A	N/A	N/A	N/A	N/A	Available	Available	-	Available	Available	N/A	-	Available	Available	-	-	Available	N/A	N/A	Available	N/A	Available	Available	N/A	-	-	-	N/A	Available	Available	Available	Available	Available	Available	Available	Available	N/A	N/A	N/A	Available	N/A	-
Coating Type	Non-Coated	-	Non-Coated	Non-Coated	-	Non-Coated	TiN	TiCN	-	Other	Other	-	-	TiCN	TiAlN	-	-	Other	Non-Coated	Non-Coated	TiAlN	Non-Coated	TiCN	TiCN	Non-Coated	-	-	-	-	TiCN	TiCN	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Non-Coated	-	-	Other	Non-Coated	-
Overall Length (L)(mm)	36 ～ 160	60	44 ～ 175	44 ～ 125	42 ～ 125	36 ～ 105	36 ～ 62	80	44.5 ～ 160	44 ～ 115	44 ～ 225	60 ～ 75	45 ～ 160	42 ～ 48	45	47.625 ～ 160	57 ～ 63	40	60	150	60 ～ 110	44 ～ 125	42 ～ 44	42 ～ 48	42	-	-	-	42 ～ 95	42 ～ 62	36 ～ 75	58 ～ 105	64 ～ 105	73 ～ 105	73 ～ 84	64	39 ～ 84	-	-	-	-	-	66 ～ 140

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-22

CTG-16

No0UN

NO.0-80UNF

No.10

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

NO.12-28UNF

NO.12-24UNC

S0.2

NO.2-64UNF

NO.2-56UNC

No.2-56UNC

S0.3

NO.3-56UNF

NO.3-48UNC

No.4

S0.4

NO.4-48UNF

NO.4-40UNC

No.4-40UNC

S0.5

NO.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-32UNC

S0.7

S0.8

NO.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1´-11

1′-11

1-8UNC

1'-8UNC

G1"-3"

1"1/2UN

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1′1/2-11

1 1/2-8UN

1"1/4UN

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2.2

M2.3

M2.5

M2.6

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

UNC 3

UNF 3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-14

3/4-10UNC

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

M3 - M18

SM3/32

M3.5

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

EGM 5

M5

M5.0

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G5/8

G 5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

G5/8 3/4

M5 - M12

M5～13

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

M5.5

EGM 6

M6

M6.0

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

MF7

PG7

7 execution M3 - M12

7/8UN

G7/8

G 7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

7/16-20UNF

7/16-14UNC

SM7/32

M7.5

EGM 8

M8

MF8

No8UN

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

M9.5

EGM 10

M10

MF10

No10UN

Tr10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

SM11/32

SM11/64

EGM 12

M12

MF12

Mf12

No12UN

Tr12

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

M15

SM15/64

M16

MF16

Mf16

Tr16

M16 x 1.5

M17

M18

MF18

Tr18

M19

M20

MF20

Mf20

M20 x 1.5

M21

M22

MF22

M23

M24

MF24

M25

MF25

Mf25

M25 x 1.5

M26

MF26

M27

MF27

M28

MF28

M30

MF30

M32

Mf32

M33

M34

M35

M36

M37

M38

M39

M40

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5-Shaped

1.5 P

1.5P

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

4 P

4P

4.5P

5

5 P

5P

6P

8P

9 P

9P

24P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

42

44

44.5

45

46

47.62

47.625

48

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

250

300

310

315

460
Drawing

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- OSG (18)
- YAMAWA MFG (10)
- CARMEX (6)
- SANDVIK (5)
- SKC (3)
- NS TOOL (1)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- TANOI MFG (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- NACHI(FUJIKOSHI) (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GUHRING (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Clear