• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Spacer sleeves / material selectable / ground, treatment selectable

Spacer sleeves / material selectable / ground, treatment selectable

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Unit еxample related to this product
Round pin escape & carry
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Washers/Collars (metal)

Technical Drawing - Washers/Collars (metal)

 

Simultaneous Grind Spacers:Related Image

Available dimensions and tolerances can be found under the tab More information.

 

Basic Properties (e.g., material, hardness, coating, tolerance) - Washers/Collars (metal)

 

TypeMaterialSurface TreatmentHardness
DWSSBEN 1.1191 Equiv.Black Oxide-
DWSSMElectroless Nickel Plating
DWSSSEN 1.4301 Equiv.-
DWSSKBEN 1.2510 Equiv.Black Oxide55HRC~
DWSSKMElectroless Nickel Plating

Further specifications can be found under the tab More information.

 

Composition of a Product Code - Washers/Collars (metal)

 

Part Number-D-V-L
DWSSS-D35.5-V12.5-L58.4

 

General Information - Washers/Collars (metal)

 

 

Selection Details of Discs and Sleeves

- Material: steel, stainless steel, aluminum, brass, tool steel
- Coating: untreated, burnished, nickel-plated, LTBC coating, anodized, chrome-plated
- Basic shapes: straight, with collar, sleeve, disc, front panel with open oblong hole
- Designs: through hole, two through holes, bolt circle, oblong hole, counterbore, conical counterbore, internal thread
- Hardness: up to ~55HRC
- ISO tolerances: g6, h7
- Inner diameter: 0 mm to 90 mm
- Outer diameter: 3 mm to 100 mm
- Length: 1 mm to 200 mm

 

Overview of the various designs as PDF

 

Description/Basics

A spacer sleeve or distance washer serves as a spacer in mechanical engineering to maintain a predetermined position. Unlike the known washers, spacer sleeves and distance washers are not punched. Spacer sleeves, which are also known as spacer sleeves, have a precise length. Their length tolerance (precision class) is up to +/- 0.01 mm. A spacer sleeve can therefore also be used as a bearing sleeve of rolling bearings.
These metal sleeves and discs are available at MISUMI either unhardened or hardened. Particularly hard discs and sleeves have a high level of wear resistance. Stainless steel sleeves and stainless steel washers are well protected against oxidation in corrosive environments. Spacer sleeves or distance sleeves can be configured with collar (flange). The height of the government is also tolerated and can also be used for maintaining a distance.

Due to the individual configuration of the distance sleeve and spacer washer, they offer nearly an unlimited use in mechanical engineering.

 

Areas of Application

The spacer sleeve or distance washer is suitable for many mechanical engineering applications due to its tolerable height. Compared to the commercially available washer, the distance washer can have a larger bearing surface. The special form as a countersunk washer is well suited for shaft mounting at the shaft end.
The precisely manufactured spacer sleeve is suitable for precisely maintaining a distance between two components. If several sleeves are necessary for this, MISUMI offers simultaneous grinding spacer sleeves. Due to the matched length of the grinding distance sleeves, which are used as a set (min. 2 pieces), a flat surface can be formed. In addition, the simultaneously ground sleeves can reduce play, because the height difference from one another is limited to +/- 5μ.
Alternatively, the metal disc or the metal collar can be suitable as a spring disk in order to serve a pressure spring as a receiver or stopper.

At MISUMI, you can configure the distance washer and distance sleeve to your specifications and order it online. The additionally selectable options extend the design freedom of the metal collars and metal discs.

 

Materials

Metal collars and metal discs in steel, tool steel and stainless steel are available in the MISUMI online shop. Stainless steel sleeves and washers provide good corrosion resistance and can be used in corrosive environments.

Alternatively, MISUMI offers discs and sleeves made of plastic and ceramic as well as thermally insulating materials for special environmental influences.
In addition, MISUMI offers discs and sleeves made of rubber and felt, which can work with diverse properties, e.g., antistatic and vibration damping.

 

Coatings

MISUMI sleeves and discs are available uncoated, burnished, nickel-plated, LTBC-coated, anodized and chrome-plated versions to protect metal sleeves and metal washers from corrosion and wear.

 

Dimensions

Overview of the geometric variants as PDF

 

Standard class and precision class of the spacer sleeve


(1) Spacer sleeve – standard class, (2) spacer sleeve – precision class

 

Standard class and precision class of the spacer disc


(1) Spacer washer – standard class, (2) spacer washer – precision class

 

Application Examples - Washers/Collars (metal)

(1) Plate, (2) spacer washer, (3) screw – hexagon socket

(1) Screw, (2) metal washer, (3) metal collar, (4) natural rubber plate

(1) Spacer sleeve, (2) ball bearing, (3) rotary shaft

(1) Distance sleeve/spacer sleeve

 

Supplementary Article

 

Ball bearing

 

Shims

 

Washers / Collars (Non-Metal, Plastic)

 

Washers / Collars (Urethane, Rubber, Sponge, Felt)

 

Shoulder bolts

 

Industrial Applications

 

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
DWSSB-D4.0-V[0,​2]-L[1-16/0.1]
DWSSB-D4.5-V[0,​2]-L[1-20/0.1]
DWSSB-D5.0-V[0,​2,​2.6,​3]-L[1-24/0.1]
DWSSB-D5.5-V[0,​2,​2.6,​3,​3.5]-L[1-28/0.1]
DWSSB-D6.0-V[0,​2,​2.6]-L[1-32/0.1]
DWSSB-D6.0-V[3-4/0.5]-L[1-32/0.1]
DWSSB-D6.5-V[0,​2,​2.6]-L[1-36/0.1]
DWSSB-D6.5-V[3-4.5/0.5]-L[1-36/0.1]
DWSSB-D7.0-V[0,​2,​2.6]-L[1-40/0.1]
DWSSB-D7.0-V[3-5/0.5]-L[1-40/0.1]
DWSSB-D7.5-V[0,​2,​2.6]-L[1-44/0.1]
DWSSB-D7.5-V[3-5.5/0.5]-L[1-44/0.1]
DWSSB-D8.0-V[0,​2,​2.6]-L[1-48/0.1]
DWSSB-D8.0-V[3-6/0.5]-L[1-48/0.1]
DWSSB-D8.5-V[0,​2,​2.6]-L[1-50/0.1]
DWSSB-D8.5-V[3-6.5/0.5]-L[1-50/0.1]
DWSSB-D9.0-V[0,​2,​2.6]-L[1-50/0.1]
DWSSB-D9.0-V[3-7/0.5]-L[1-50/0.1]
DWSSB-D9.5-V[0,​2,​2.6]-L[1-50/0.1]
DWSSB-D9.5-V[3-7.5/0.5]-L[1-50/0.1]
DWSSB-D10-V[0,​2,​2.6]-L[1-50/0.1]
DWSSB-D10-V[3-8/0.5]-L[1-50/0.1]
DWSSB-D10.5-V[0,​2,​2.6]-L[1-68/0.1]
DWSSB-D10.5-V[3-8.5/0.5]-L[1-68/0.1]
DWSSB-D11.0-V[0,​2,​2.6]-L[1-72/0.1]
DWSSB-D11.0-V[3-9/0.5]-L[1-72/0.1]
DWSSB-D11.5-V[0,​2,​2.6]-L[1-76/0.1]
DWSSB-D11.5-V[3-9.5/0.5]-L[1-76/0.1]
DWSSB-D12.0-V[0,​2,​2.6]-L[1-80/0.1]
DWSSB-D12.0-V[3-10/0.5]-L[1-80/0.1]
DWSSB-D12.5-V[0,​2,​2.6]-L[1-84/0.1]
DWSSB-D12.5-V[3-10.5/0.5]-L[1-84/0.1]
DWSSB-D13.0-V[0,​2,​2.6]-L[1-88/0.1]
DWSSB-D13.0-V[3-11/0.5]-L[1-88/0.1]
DWSSB-D13.5-V[0,​2,​2.6]-L[1-92/0.1]
DWSSB-D13.5-V[3-11.5/0.5]-L[1-92/0.1]
DWSSB-D14.0-V[0,​2,​2.6]-L[1-96/0.1]
DWSSB-D14.0-V[3-12/0.5]-L[1-96/0.1]
DWSSB-D14.5-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D14.5-V[3-12.5/0.5]-L[1-100/0.1]
DWSSB-D15.0-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D15.0-V[3-13/0.5]-L[1-100/0.1]
DWSSB-D15.5-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D15.5-V[3-13.5/0.5]-L[1-100/0.1]
DWSSB-D16.0-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D16.0-V[3-14/0.5]-L[1-100/0.1]
DWSSB-D16.5-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D16.5-V[3-14.5/0.5]-L[1-100/0.1]
DWSSB-D17.0-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D17.0-V[3-15/0.5]-L[1-100/0.1]
DWSSB-D17.5-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D17.5-V[3-15.5/0.5]-L[1-100/0.1]
DWSSB-D18.0-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D18.0-V[3-16/0.5]-L[1-100/0.1]
DWSSB-D18.5-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D18.5-V[3-16.5/0.5]-L[1-100/0.1]
DWSSB-D19.0-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D19.0-V[3-17/0.5]-L[1-100/0.1]
DWSSB-D19.5-V[0,​2,​2.6]-L[1-100/0.1]
DWSSB-D19.5-V[3-17.5/0.5]-L[1-100/0.1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSO.D. D
(mm) 		I.D.
(mm) 		Thickness/Length
(mm) 		Material Surface Treatment Hardness
(HRC)

-

2 6 Days 1040 ～ 21 ～ 16[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 104.50 ～ 21 ～ 20[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1050 ～ 31 ～ 24[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 105.50 ～ 3.51 ～ 28[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1060 ～ 2.61 ～ 32[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1063 ～ 41 ～ 32[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 106.50 ～ 2.61 ～ 36[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 106.53 ～ 4.51 ～ 36[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1070 ～ 2.61 ～ 40[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1073 ～ 51 ～ 40[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 107.50 ～ 2.61 ～ 44[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 107.53 ～ 5.51 ～ 44[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1080 ～ 2.61 ～ 48[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1083 ～ 61 ～ 48[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 108.50 ～ 2.61 ～ 50[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 108.53 ～ 6.51 ～ 50[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1090 ～ 2.61 ～ 50[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1093 ～ 71 ～ 50[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 109.50 ～ 2.61 ～ 50[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 109.53 ～ 7.51 ～ 50[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10100 ～ 2.61 ～ 50[Steel] EN 1.1191 Equiv.Not ProvidedNo Hardened

-

2 6 Days 10103 ～ 81 ～ 50[Steel] EN 1.1191 Equiv.Not ProvidedNo Hardened

-

2 6 Days 1010.50 ～ 2.61 ～ 68[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1010.53 ～ 8.51 ～ 68[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10110 ～ 2.61 ～ 72[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10113 ～ 91 ～ 72[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1011.50 ～ 2.61 ～ 76[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1011.53 ～ 9.51 ～ 76[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10120 ～ 2.61 ～ 80[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10123 ～ 101 ～ 80[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1012.50 ～ 2.61 ～ 84[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1012.53 ～ 10.51 ～ 84[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10130 ～ 2.61 ～ 88[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10133 ～ 111 ～ 88[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1013.50 ～ 2.61 ～ 92[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1013.53 ～ 11.51 ～ 92[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10140 ～ 2.61 ～ 96[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10143 ～ 121 ～ 96[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1014.50 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1014.53 ～ 12.51 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10150 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10153 ～ 131 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1015.50 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1015.53 ～ 13.51 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10160 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10163 ～ 141 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1016.50 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1016.53 ～ 14.51 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10170 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10173 ～ 151 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1017.50 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1017.53 ～ 15.51 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10180 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10183 ～ 161 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1018.50 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1018.53 ～ 16.51 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10190 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 10193 ～ 171 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1019.50 ～ 2.61 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

-

2 6 Days 1019.53 ～ 17.51 ～ 100[Steel] EN 1.1191 Equiv.Black OxideNo Hardened

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>

Back to the Category Washers/Collars (metal)

Technical Drawing - Washers/Collars (metal)

 

Simultaneous Grind Spacers:Related Image

Overview of the various designs as PDF

 

Specification Tables - Washers/Collars (metal)

 

Part NumberD 0.5mm IncrementV
0.5mm Increment
(V3 or More)		LSimultaneous Grinding Maximum QuantityUnit Price
Machining Conditions0.1mm IncrementDWSSBDWSSMDWSSSDWSSKBDWSSKM
DWSSB
DWSSM
DWSSS
DWSSKB
DWSSKM		4.0~10.00
2
2.6
3.0~8.0		L≤40 Simultaneous Grind Spacers:Related ImageD-V≥2
40.1≤L≤50 Simultaneous Grind Spacers:Related ImageD-V≥4		1.0~ 5.0100 pcs.     
5.1~ 10.0     
10.1~ 25.0     
25.1~ 40.0     
40.1~ 50.0     
10.5~15.50
2
2.6
3.0~13.5		L≤40 Simultaneous Grind Spacers:Related ImageD-V≥2
40.1≤L≤80 Simultaneous Grind Spacers:Related ImageD-V≥4
80.1≤L≤100 D-V≥6		1.0~ 5.0     
5.1~ 10.0     
10.1~ 25.0     
25.1~ 40.0     
40.1~ 55.0     
55.1~ 70.0     
70.1~ 85.0     
85.1~ 100.0     
16.0~20.00
2
2.6
3.0~18.0		L≤40 Simultaneous Grind Spacers:Related ImageD-V≥2
40.1≤L≤80 Simultaneous Grind Spacers:Related ImageD-V≥4
80.1≤L≤100 Simultaneous Grind Spacers:Related ImageD-V≥6		1.0~ 20.050 pcs.     
20.1~ 30.0     
30.1~ 40.0     
40.1~ 50.0     
50.1~ 60.0     
60.1~ 70.0     
70.1~ 80.0     
80.1~ 90.0     
90.1~ 100.0     
20.5~30.00
2
2.6
3.0~28.0		L≤50 Simultaneous Grind Spacers:Related ImageD-V≥2
50.1≤L≤100 Simultaneous Grind Spacers:Related ImageD-V≥6		1.0~ 20.0     
20.1~ 30.0     
30.1~ 40.0     
40.1~ 50.0     
50.1~ 60.0     
60.1~ 70.0     
70.1~ 80.0     
80.1~ 90.0     
90.1~ 100.0     
30.5~39.50
2
2.6
3.0~37.5		L≤50 Simultaneous Grind Spacers:Related ImageD-V≥2
50.1≤L≤100 Simultaneous Grind Spacers:Related ImageD-V≥6		1.0~ 20.020 pcs.   --
20.1~ 30.0   
30.1~ 40.0   
40.1~ 50.0   
50.1~ 60.0   
60.1~ 70.0   
70.1~ 80.0   
80.1~ 90.0   
90.1~ 100.0   
40.0~50.00
2
2.6
3.0~48.0		L≤50 Simultaneous Grind Spacers:Related ImageD-V≥2
50.1≤L≤100 Simultaneous Grind Spacers:Related ImageD-V≥6		1.0~ 20.0   
20.1~ 30.0   
30.1~ 40.0   
40.1~ 50.0   
50.1~ 60.0   
60.1~ 70.0   
70.1~ 80.0   
80.1~ 90.0   
90.1~100.0   
Common Machining Conditions: L≤Vx8 DWSSS(EN 1.4301 Equiv.)Simultaneous Grind Spacers:Related ImageL≥2 Please order 2 or more pieces. No specification available for sizes without declaration of value.
 

Basic information

Shape Straight Inner Shape Straight O.D. Tolerance 0 to -0.2
I.D. Tolerance +0.3 to +0.1 Thickness/Length Tolerance ±0.05 Sale Type Sold Separately
Dimension Specifying Method Dimension Configurable Type Precision Precision Grade

Configure

Clear all

752Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • O.D. D(mm)

    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 7.5
    • 8
    • 8.5
    • 9
    • 9.5
    • 10
    • 10.5
    • 11
    • 11.5
    • 12
    • 12.5
    • 13
    • 13.5
    • 14
    • 14.5
    • 15
    • 15.5
    • 16
    • 16.5
    • 17
    • 17.5
    • 18
    • 18.5
    • 19
    • 19.5
    • 20
    • 20.5
    • 21
    • 21.5
    • 22
    • 22.5
    • 23
    • 23.5
    • 24
    • 24.5
    • 25
    • 25.5
    • 26
    • 26.5
    • 27
    • 27.5
    • 28
    • 28.5
    • 29
    • 29.5
    • 30
    • 30.5
    • 31
    • 31.5
    • 32
    • 32.5
    • 33
    • 33.5
    • 34
    • 34.5
    • 35
    • 35.5
    • 36
    • 36.5
    • 37.0
    • 37.5
    • 38
    • 38.5
    • 39
    • 39.5
    • 40
    • 40.5
    • 41
    • 41.5
    • 42
    • 42.5
    • 43
    • 43.5
    • 44
    • 44.5
    • 45
    • 45.5
    • 46
    • 46.5
    • 47.0
    • 47.5
    • 48
    • 48.5
    • 49
    • 49.5
    • 50

    Clear

  • I.D.(mm)

    • 0
    • 2
    • 2.6
    • 3
    • 3.5

     [3-48/0.5mm Unit(s)]

    Clear

  • Thickness/Length(mm)

     [1-100/0.1mm Unit(s)]

    Clear

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4301 Equiv.
    • EN 1.2510 Equiv.

    Clear

  • Surface Treatment

    • Not Provided
    • Black Oxide
    • Electroless Nickel Plating

    Clear

  • Hardness(HRC)

    • 55HRC~
    • No Hardened

    Clear

  • Type

    • DWSSB
    • DWSSKB
    • DWSSKM
    • DWSSM
    • DWSSS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 6 Days or Less
    • 7 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.