EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

GANTER Set Collars / Clamping Rings

Narrow search by specifying Tightening Method

Set Screw
Slit
Split
Hinged
Wedge
One-Touch
Surface Pressure

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Promotional pricing

Set collars / steel / galvanised / double grub screw / similar to DIN 705 / GN 705

GANTER

Set collars GN 705 essentially comply with the designs of DIN 705 which has been re-issued in April 2007.
The official standard sheet also lists the sizes d1 = 2 / 2,5 / 3 / 3,5 / 4 / 4,5 / 85 / 90 / 100 / 110 / 120 / 125 / 125 / 140 / 150 / 160 / 180 and 200, although it does not show a whole series of the intermediate sizes listed in the above table.
Also, the official standard sheet still lists the Types B and C for fixing the set collars with transverse pin, but not Type E.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	0.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Set collars / aluminium / quick release / GN 704

GANTER

The force lock with the shaft is made in the GN 704 quick release set collars via an eccentric lever which allows the collars to be adjusted easily and quickly without tools. The aluminium design delivers low inertia values.
The specified tightening torque of the screw is a recommended value with which the collar clamped to a shaft (with closed eccentric lever) is capable of reaching the specified axial load capacity. The details on axial load capacity are non-binding guidance values and do not constitute a warranty of characteristics.
Keeping the friction surface of the eccentric lever slightly greased will help to prolong the useful service life.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	53.60 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Set collars / stainless steel / slotted / GN 706.2

GANTER

Semi-split set collars GN 706.2 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 20 to 36 d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.72 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Set collars / stainless steel / double grub screw / similar to DIN 705 / GN 705

GANTER

Stainless Steel-Set collars GN 705 essentially comply with the designs of DIN 705 which has been re-issued in April 2007.
The official standard sheet also lists the sizes d1 = 2 / 2,5 / 3 / 3,5 / 4 / 4,5 / 85 / 90 / 100 / 110 / 120 / 125 / 125 / 140 / 150 / 160 / 180 and 200, although it does not show a whole series of the intermediate sizes listed in the above table.
Also, the official standard sheet still lists the Types B and C for fixing the set collars with transverse pin, but not Type E.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	2.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Set collars / aluminium, steel / two-piece / GN 707.2

GANTER

Split set collars GN 707.2 are used when the latter cannot be slipped over a shaft.
For size d1 = 20 to 36 d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.70 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Set collars / stainless steel / slotted / internal thread / GN 706.3

GANTER

Stainless Steel-threaded set collars GN 706.3 can be used in connection with bolt thread tolerance 6g. After clamping, the thread of the semi-split set collar may no longer be tolerance-stable (6H).
The thread d3 for sizes d1 = 20 to 36 is designed as a through hole, from size d1 = 42 it is designed as blind hole.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.98 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Set collars / steel / double grub screw / similar to DIN 705 / GN 705

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	0.68 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Set collars / stainless steel / two-piece / shape selectable / GN 7072.1

GANTER

With extension-tapped holes of the split Stainless Steel-Set collars GN 7072.1, sensor holders GN 7062.10 or other elements such as the gear lever or cam can be attached to shafts and axles.

They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles. As compared to semi-split set collars, split set collars can even be assembled radially.

The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.

Volume Discount

Starting from^∗ ：	36.14 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Set collars / aluminium, steel / slotted / GN 706.2

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.58 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Set collars / stainless steel / shape selectable / GN 7062.3

GANTER

With extension-tapped holes of the semi-split Stainless Steel-Set collars GN 7062.1, sensor holders GN 7062.10 or other elements such as the gear lever or cam can be attached to shafts and axles.

They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.

The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.

Volume Discount

Starting from^∗ ：	29.82 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Set collars / stainless steel / slotted / clamping lever / GN 706.4

GANTER

Semi-split set collars GN 706.4 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 32 and 36, d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	26.16 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Set collars / stainless steel / two-piece / GN 707.2

GANTER

Stainless Steel-Split set collars GN 707.2 are used when the latter cannot be slipped over a shaft.
For size d1 = 20 to 36 d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.92 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Set collars / steel / slotted / internal thread / GN 706.3

GANTER

Threaded set collars GN 706.3 can be used in connection with bolt thread tolerance 6g. After clamping, the thread of the semi-split set collar may no longer be tolerance-stable (6H).
The thread d3 for sizes d1 = 20 to 36 is designed as a through hole, from size d1 = 42 it is designed as blind hole.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.06 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Set collars / stainless steel / slotted / cross bore selectable / GN 7062.2

GANTER

With semi-split Stainless Steel-Set collars GN 7062.2, e.g., axles are attached to housing, or wheels and washers are installed on shafts.

They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.

The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.

Volume Discount

Starting from^∗ ：	27.50 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Set collars / stainless steel / two-piece / damped / GN 7072.3

GANTER

The affixed dampening washer of the split Stainless Steel-Set collars GN 7072.3 absorbs mild shocks and has a sound-dampening effect when the set collars come into contact with other components.

They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles. As compared to semi-split set collars, split set collars can even be assembled radially.

The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.

Volume Discount

Starting from^∗ ：	16.92 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Set collars / aluminium, steel / slotted / clamping lever / GN 706.4

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	18.70 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Holding discs for magnets / stainless steel / GN 70

GANTER

Stainless-Steel-Holding discs GN 70 are used as companion parts for retaining magnets, e.g. if a magnet is to be used in connection with non-magnetic materials.
They can be fixed with countersunk screws (e.g. DIN 7991), but also with any commercial wood or sheet metal countersunk screws.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	2.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Set collars / stainless steel / slotted / damped / GN 7062.3

GANTER

The affixed dampening washer of the semi-split Stainless Steel-Set collars GN 7062.3 absorbs mild shocks and has a sound-dampening effect when the set collars come into contact with other components.

They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.

The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.

Volume Discount

Starting from^∗ ：	13.90 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Set collars / stainless steel / two-piece / cross bore selectable / GN 7072.2

GANTER

With split Stainless Steel-Set collars GN 7072.2, e.g., axles are attached to housing, or wheels and washers are installed on shafts.

They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles. As compared to semi-split set collars, split set collars can even be assembled radially.

The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.

Volume Discount

Starting from^∗ ：	33.36 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Tightening Method
RoHS Information
Specifications
Features, Areas of Application
I.D.(mm)
O.D.(mm)
Width(mm)
Material
Surface Treatment
Thickness
Side Surface Machining

	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing		Promotional pricing		Promotional pricing		Promotional pricing	Promotional pricing	Promotional pricing				Promotional pricing
Brand	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Set collars / steel / galvanised / double grub screw / similar to DIN 705 / GN 705	Set collars / aluminium / quick release / GN 704	Set collars / stainless steel / slotted / GN 706.2	Set collars / stainless steel / double grub screw / similar to DIN 705 / GN 705	Set collars / aluminium, steel / two-piece / GN 707.2	Set collars / stainless steel / slotted / internal thread / GN 706.3	Set collars / steel / double grub screw / similar to DIN 705 / GN 705	Set collars / stainless steel / two-piece / shape selectable / GN 7072.1	Set collars / aluminium, steel / slotted / GN 706.2	Set collars / stainless steel / shape selectable / GN 7062.3	Set collars / stainless steel / slotted / clamping lever / GN 706.4	Set collars / stainless steel / two-piece / GN 707.2	Set collars / steel / slotted / internal thread / GN 706.3	Set collars / stainless steel / slotted / cross bore selectable / GN 7062.2	Set collars / stainless steel / two-piece / damped / GN 7072.3	Set collars / aluminium, steel / slotted / clamping lever / GN 706.4	Holding discs for magnets / stainless steel / GN 70	Set collars / stainless steel / slotted / damped / GN 7062.3	Set collars / stainless steel / two-piece / cross bore selectable / GN 7072.2
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D		2D / 3D	2D / 3D	2D / 3D			2D / 3D	2D / 3D
Starting from^∗	0.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	53.60 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.72 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	2.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.70 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.98 € *Unit price with basic configuration Volume Discount	0.68 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	36.14 € *Unit price with basic configuration Volume Discount	5.58 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	29.82 € *Unit price with basic configuration Volume Discount	26.16 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.92 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	13.06 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	27.50 € *Unit price with basic configuration Volume Discount	16.92 € *Unit price with basic configuration Volume Discount	18.70 € *Unit price with basic configuration Volume Discount	2.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	13.90 € *Unit price with basic configuration Volume Discount	33.36 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	Same day	Same day	Same day	Same day	Same day	7 Days	Same day	7 Days	Same day	7 Days	Same day	Same day	Same day	7 Days	7 Days	7 Days	Same day	7 Days	7 Days
Tightening Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
RoHS Information	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Specifications	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Features, Areas of Application	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
I.D.(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
O.D.(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Width(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Thickness	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Side Surface Machining	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

RoHS Information
- RoHS Requirements Fulfilled
Clear

Specifications
- Standard
- With Clamp Lever
- For Bearing Mounting
- With Urethane
- With Side Mounting Holes
- D Cut
- 2-Flat
- Threaded Bore
- With Key Relief Groove
Enlarge image

Clear

Features, Areas of Application
Corrosion and Chemical Resistance

Not Applicable
Details

Clear

I.D.(mm)
3

4

5

6

6+0.05

6.35

7

7.938

8

8+0.07

9

9.525

10

10+0.07

10.5

11

11.113

12

12+0.07

12.7

13

13.8

14

15

15.875

16

16+0.07

17

17.3

18

19

19.05

20

20*

20+0.07

21

21.7

22

22.225

23

23.813

24

25

25+0.07

25.4

26

27

27.2

28

28.575

30

30+0.12

31.75

32

34

34.925

35

36

38

38.1

40

40+0.12

42

42.7

44.45

45

48

48.6

50

50+0.12

50.8

52

55

56

57.15

58

60

63

63.5

65

68

70

72

75

76.2

80

85

90

100

110

120

125

130

140
Drawing

Clear

O.D.(mm)
7

8

10

11

12

13

14

15

16

17

17.2

18

18*

18.7

19

20

21.7

22

23

24

24.2

25

26

27

28

29

29.2

30

31

32

33

33.2

34

34.5

35

35.5

36

38

39

40

40.2

41

42

43

44

45

46

46.2

47

48

49

50

51

51.5

52

52.2

53

54

55

56

57

58

59

60

62

63

64

65

65.4

66

66.5

68

69

70

72

73

75

76

78

79

79.5

80

81

82

83

85

86

88

90

93

94

95

98

100

103

105

108

110

113

115

119

125

126

130

140

150

160

170

180

200
Drawing

Clear

Width(mm)
1.5

5

6

7

7.5

8

8.5

9

9.5

10

10*

11

11.5

12

12.5

13

14

15

15.5

16

17

17.5

18

19

19.5

20

21

22

22.5

23

24

25

26

27

28

28.5

29

30

32

33

36

41

47

67
Drawing

Clear

Material
- Steel
- Stainless Steel
- Aluminum
- Resin
Clear

Surface Treatment
- No Surface Treatment
- Surface Treatment Provided
- Black Anodized
- Zinc Plating
Clear

Thickness
- Standard Type
- Compact Type
- Wide Type
- Balanced Type
Clear

Side Surface Machining
- Not Provided
- 2-Hole
- 3-Hole
- 4-Hole
- Screw 2-Hole
- Screw 3-Hole
- Screw 4-Hole
- Counterbore 2-Hole
- Counterbore 3-Hole
Clear

Narrow search by specifying Brand

- MISUMI (38)
- Cost Efficient Products ()
- ESCO (74)
- MAEDLER (66)
- IWATA MFG (55)
- GANTER (19)
- NORELEM (18)
- KIPP (15)
- KATAYAMA CHAIN (8)
- KONISHI MFG (6)
- KBK (4)
- ELESA (3)
- HALDER (3)
- REYHER (2)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

Narrow search by specifying lead time

All

Same day

2 Days or Less

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less
Clear