- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
GANTER Handles / Bow handles / Cup handles / Trough handles / Carrying handles
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Cabinet "U" handles, Aluminium
GANTER
GN 565.1 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
The SWU version is coated with a highly weather-resistant and UV-protective powder coating system, making this version excellent for outdoor use.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 8.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Folding handles with recessed tray
GANTER
The folding handles with recessed tray GN 425.8 are used if the handle is to protrude by a maximum of 3 mm when folded down.
In type A, the folding handle is held in both end positions by spring-loaded thrust pieces.
In type B, the folding handle always spring-returns to the starting position after being released, preventing it from protruding with potentially interfering effect.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 35.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
GN 565 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
The SWU version is coated with a highly weather-resistant and UV-protective powder coating system, making this version excellent for outdoor use.
The WSA version has a powder coating based on zinc molybdate, which gives it antimicrobial properties. The principle of action, which is activated by the presence of moisture, demonstrably reduces the growth of viruses, bacteria, and fungi within 24 hours, so that contaminated surfaces ultimately have less than 0.2% of the original number of microbes.
Standard elements with antimicrobial plastic coating are primarily used in the health care sector and in public buildings, such as airports, train stations, stadiums, etc.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.54 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Gripping trays, Zinc die casting, screw-in type (GN 7330)
GANTER
Gripping trays GN 7330 can be easily and quickly installed from the front using countersunk screws or from the back with grub screws.
Gripping trays with housing seal (no. 2) prevent the penetration of any dirt or liquids into the housing interior. Type A is supplied with four additional countersunk sealing screws, which feature a polyamide coating on the head to create a tight seal.- Volume Discount
Starting from∗ ： 10.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Inclined cabinet "U" handles, Aluminium
GANTER
Inclined cabinet "U" handles GN 565.2 are produced from profiled aluminum
extrusions. Produced from profiled aluminium extrusions their special features are their rigidity and ergonomical shaping.
The angled contact surface allows improved access even in tight spaces such as corners.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.
In type B lens screws, hexagon nuts and washers are included parts of the order.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 8.62 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Finger handles
GANTER
Stainless Steel-Finger handles- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
M.1066 - Tubular handles -Technopolymer aluminium stainless steel
ELESA
Tubular handle with handle shanks in glass-fibre reinforced polyamide-based technopolymer, lateral closing caps in polyamide-based technopolymer and option for front or rear mounting.Aluminium tube with metallic graphite colour coating, or aluminium with metallic graphite colour epoxy resin coating, or natural anodized aluminium, or AISI 304 stainless steel, or aluminium with coating in white similar to RAL9002 for the CLEAN version.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 35.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cabinet "U" handles, Steel
GANTER
Cabinet "U" handles GN 425 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The chrome-plated design is only conditionally suitable for outdoor use. The stainless steel design version should be given preference.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.86 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Steel
GANTER
Cabinet "U" handles GN 425 Ø 6, Ø 8 and Ø 10 are supplied with two location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The chrome-plated design is only conditionally suitable for outdoor use. The stainless steel design version should be given preference.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Folding handles, Steel
GANTER
Folding handles GN 425.5 are used in places where the handle must not protrude or protrude only a short distance.
The handle is locked in place in the resting position by means of a spring-loaded (cup springs) thrust bolt.
The static load capacity value given in the table is an approximate value which, if exceeded, may result in permanent deformation or fracture of the plastic attachment part. The folding handle GN 425.2 may be used as an alternative.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 24.78 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Stainless Steel-Ledge handle
GANTER
The GN 730.5 Stainless Steel-Ledge handle is used on doors, guards and hatches on machines, as well as on drawers and pull-out units.
Due to the material used, the handle is intended especially for use in corrosive environments with aggressive media.
The ledge handle is made in a way that does not allow pooling of fluids, which makes cleaning easier and prevents build up of residue and bacteria.
It can be attached from the back side via the mounting thread. Alternatively, the handles can be welded from the front.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 62.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
Cabinet "U" handles GN 427 are produced from profiled aluminum extrusions.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.42 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
Cabinet "U" handles GN 565.3 are suitable for applications where lower „lifting forces are required such as on lids or protective machine covers.
The countersunk holes of type B allow fixing with self tapping screws or countersunk rivets.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.48 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
The installation of cabinet "U" handles GN 728 can be carried out from the back (Type A) as well as from the operator’s side (Type B). The hole centers dimension is identical on all variants. As a result they can be mounted in pairs opposite each other.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.56 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Folding handles
GANTER
Folding handles GN 425.5 are used in places where the handle must not protrude or protrude only a short distance.
The handle is locked in place in the resting position by means of a spring-loaded (cup springs) thrust bolt.
The static load capacity value given in the table is an approximate value which, if exceeded, may result in permanent deformation or fracture of the plastic attachment part. The folding handle GN 425.2 may be used as an alternative.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 27.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Tubular handles
GANTER
Type E of Stainless Steel-Tubular handles GN 666.5 is completely made of A2-Stainless Steel.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 61.72 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Cabinet "U" handles
GANTER
The special features of Stainless Steel-Cabinet „U“ handles GN 565.5 are their rigidity and ergonomical shaping.
Stainless Steel-Cabinet „U“ handles (Type A) are produced from profiled extrusions. The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 26.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Tubular handles
GANTER
For a mounting of Stainless Steel-Tubular handles GN 666.7 (mounting from the back) the stud is first screwed in from the machine side with the threaded pin DIN 913-M8x25 (included) and then the handle is pushed on and secured with the grub screw DIN 914-M5.
Type E of Stainless Steel-Tubular handles GN 666.7 is completely made of A2-Stainless Steel.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 87.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tubular handles with movable handle legs
GANTER
The spacing of the attachment holes of the tubular handles GN 333.2 is adjustable. Further handle legs can be added for very long tubular handles.
Tubular handles GN 333.2 are supplied unassembled.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 47.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Aluminum (GN 328)
GANTER
GN 328 cabinet “U” handles have excellent stability and ergonomic design.The finger recesses on the underside of the handle provide a specially comfortable grip.In particular in combination with the larger GN 428 cabinet “U” handle, they meet the requirements of modern industrial design.- Volume Discount
Starting from∗ ： 8.22 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel-Folding handles (GN 425.9)
GANTER
GN 425.9 Stainless Steel-Folding handles are used where the handle must only protrude a short distance in the resting position.Folding handles numbers 1 and 2 are suitable for side “access,” as these have a 90° limit stop. If used from above, numbers 3 and 4 with a handle which can fold freely through 180° are a better version.The retaining springs of numbers 2 and 4 keep the handle in any position. This keeps the handle in a position which can be easily accessed and prevents noise as a result of vibration in the resting position.The handle and the retaining springs are secured by mounting the attachment across the entire surface. All components are supplied unassembled.- Volume Discount
Starting from∗ ： 19.06 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
„U“ handles
GANTER
The dimensisons of the „U“ handles GN 423 have been designed to match a 19“ rack and enclosure layout.
The values of the height unit HE given in the table refer to the corresponding front panel heights of the housings.
Handle bar and handle shanks are interconnected via a plug-type connection, with the effect that special lengths are easily realised.
Thanks to the fixing screws included in the set, the „U“ handles are easily and economically mounted.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.90 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles for welding
GANTER
GN 426.3 cabinet “U” handles are produced through bending. This allows special lengths or special geometries with the same r and s dimensions to be delivered even in comparatively small unit quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
Aluminium-Cabinet "U" handles GN 425.1 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.54 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
Aluminium-Cabinet "U" handles GN 425 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
Starting from∗ ： 6.68 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
A special characteristic of the Handle GN 559 is the thumb rest pad on the front of the leg. At the same time the extended leg offers an open ended version with wide access.
The fastening bores of type C are closed by a cap following the handle installation. The cap is included in the delivery contents.
Handles GN 559 are known for their high stability. They are fixed by two M8 screws whereby type A offers two alternative hole centers (l2 or l3).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.36 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Cast iron
GANTER
Cabinet "U" handles GN 225 are simple, very rugged handles.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 10.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Inclined Stainless Steel-Cabinet "U" handles
GANTER
Inclined Stainless Steel-Cabinet "U" handles GN 565.7 are produced from profiled Stainless Steel
extrusions. Their special features are their rigidity and ergonomical shaping.
The angled contact surface allows improved access even in tight spaces such as corners.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 42.62 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ledge handles
GANTER
Typical applications for ledge handles GN 430 include swivel or sliding doors on protective doors and equipment. They are also suitable for use as drawer handles.
The screw channel for screw sizes M6 (extruded aluminium) allows an optional number of fixing screws in any position within the dimension l2.
Special lengths can be manufactured from relatively small quantities upwards.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Cabinet "U" handles
GANTER
Stainless Steel-Cabinet "U" handles GN 425 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The stainless steel design version should be given preference.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 8.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Cabinet "U" handles
GANTER
Cabinet "U" handles GN 427.5 are produced from profiled extrusions.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Cabinet "U" handles
GANTER
Stainless Steel-Cabinet "U" handles GN 426.5 can be mounted from the back (type A) as well as from the operator’s side (type B). In this case the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw.
Both mounting methods allow the mounting of a pair of handles in opposite position. This method could be used e.g. on doors (double handle). In general, a mounting stud with special length l2 might be required.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 43.80 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Folding handles
GANTER
Stainless Steel-Folding handles GN 425.2 are used in such applications where minimal protrusion is required.
In both positions the handle is retained by a spring loaded detent.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 46.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Stainless Steel-Tubular handles
GANTER
The tube of the Stainless Steel-Tubular handles GN 333.5 is laser welded with the legs without gap and with tight fit, preventing dirt from entering at this point.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 14.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tubular handles, Aluminium / Zinc die casting
GANTER
The handle tube of the GN 333.1 tubular handles can be screwed to the handle bases without further machining or processing, allowing special lengths to be realised easily.
For type B, lens head screws, hexagon nuts and washers are included.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 14.94 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Arch handles, Aluminium
GANTER
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.98 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 63.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 4.54 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles
GANTER
GN 428 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the manufacturing process, special designs can be supplied even in relatively small quantities.
For type B, socket button head screws, hexagon nuts and washers are included parts of the order.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 27.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cabinet "U" handles Steel / Polyurethane foam
GANTER
The shock absorbing casing of the GN 564 “U” handles made of Thermoplastic polyurethane (TPU) offers protection from injuries, while its elliptical shape give it a nice hold.
The steel core guarantees high durability.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 19.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
Cabinet "U" handles GN 426.1 are produced from profiled aluminium extrusions.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 21.14 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Aluminium
GANTER
GN 426 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
The WSA version has a powder coating based on zinc molybdate, which gives it antimicrobial properties. The principle of action, which is activated by the presence of moisture, demonstrably reduces the growth of viruses, bacteria, and fungi within 24 hours, so that contaminated surfaces ultimately have less than 0.2% of the original number of microbes.
Standard elements with antimicrobial plastic coating are primarily used in the health care sector and in public buildings, such as airports, train stations, stadiums, etc.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.42 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cabinet "U" handles, Hygienic Design
GANTER
GN 429 cabinet „U“ handles are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead spaces. The high quality finish prevents adherence of dirt and facilitates cleaning.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.- Volume Discount
Starting from∗ ： 28.72 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Cabinet "U" handles, Steel, for welding
GANTER
The manufacturing process (bending) of the cabinet "U" handles GN 425.3 allows the production of special lengths in relatively small quantities.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.44 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Edge handles, Aluminum / Zinc die casting
GANTER
The tube extrusion for edge handles GN 481 is formed in such a way that two countersunk self tapping screws are used to cut their own counter thread in the extrusion to hold the end caps in position.
If an edge handle for a cabinet of non-standard length is required, a standard extrusion can simply be shortened to fit.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Main Body Type |
| Surfaced Type Category |
| U-shaped Type |
| Pitch P(mm) |
| Main Body Material |
| Pitch P2 (Short Side) *If 4 Holes(mm) |
| Height H(mm) |
| Additional Function |
| Main Body, Surface Treatment |
| Mounting Method |
| Handle Thickness D(mm) |
| Handle Cross Sectional Shape |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | ELESA | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | M.1066 - Tubular handles -Technopolymer aluminium stainless steel | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| Starting from∗ | 8.30 € *Unit price with basic configuration Volume Discount | 35.88 € *Unit price with basic configuration Volume Discount | 6.54 € *Unit price with basic configuration Volume Discount | 10.48 € *Unit price with basic configuration Volume Discount | 8.62 € *Unit price with basic configuration Volume Discount | 6.50 € *Unit price with basic configuration Volume Discount | 35.38 € *Unit price with basic configuration Volume Discount | 4.86 € *Unit price with basic configuration Volume Discount | 4.20 € *Unit price with basic configuration Volume Discount | 24.78 € *Unit price with basic configuration Volume Discount | 62.00 € *Unit price with basic configuration Volume Discount | 5.42 € *Unit price with basic configuration Volume Discount | 6.48 € *Unit price with basic configuration Volume Discount | 6.56 € *Unit price with basic configuration Volume Discount | 27.50 € *Unit price with basic configuration Volume Discount | 61.72 € *Unit price with basic configuration Volume Discount | 26.88 € *Unit price with basic configuration Volume Discount | 87.74 € *Unit price with basic configuration Volume Discount | 47.88 € *Unit price with basic configuration Volume Discount | 8.22 € *Unit price with basic configuration Volume Discount | 19.06 € *Unit price with basic configuration Volume Discount | 6.90 € *Unit price with basic configuration Volume Discount | 12.74 € *Unit price with basic configuration Volume Discount | 6.54 € *Unit price with basic configuration Volume Discount | 6.68 € *Unit price with basic configuration Volume Discount | 13.36 € *Unit price with basic configuration Volume Discount | 10.50 € *Unit price with basic configuration Volume Discount | 42.62 € *Unit price with basic configuration Volume Discount | 7.10 € *Unit price with basic configuration Volume Discount | 8.10 € *Unit price with basic configuration Volume Discount | 11.30 € *Unit price with basic configuration Volume Discount | 43.80 € *Unit price with basic configuration Volume Discount | 46.66 € *Unit price with basic configuration Volume Discount | 14.30 € *Unit price with basic configuration Volume Discount | 14.94 € *Unit price with basic configuration Volume Discount | 12.98 € *Unit price with basic configuration Volume Discount | 63.50 € *Unit price with basic configuration Volume Discount | 4.54 € *Unit price with basic configuration Volume Discount | 27.62 € *Unit price with basic configuration Volume Discount | 19.40 € *Unit price with basic configuration Volume Discount | 21.14 € *Unit price with basic configuration Volume Discount | 12.42 € *Unit price with basic configuration Volume Discount | 28.72 € *Unit price with basic configuration Volume Discount | 3.44 € *Unit price with basic configuration Volume Discount | 13.02 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | 5 Days | Same day | 5 Days | Same day | Same day | 6 Days | Same day | Same day | 4 Days | 5 Days | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | 7 Days | 4 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 4 Days | Same day | Same day | Same day | Same day | Same day | 5 Days | 5 Days | Same day | Same day | 4 Days | Same day | 5 Days |
| Main Body Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surfaced Type Category | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| U-shaped Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch P(mm) | - | - | - | - | - | - | 250 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | - | - | - | - | - | - | EN 1.4301 Equiv. | - | - | - | Stainless Steel | - | - | - | Stainless Steel | - | - | - | - | - | Stainless Steel | - | Steel | Aluminum | Aluminum | - | - | - | - | Stainless Steel | - | - | Stainless Steel | - | - | - | - | - | Aluminum | - | Aluminum | Aluminum | Stainless Steel | Steel | - |
| Pitch P2 (Short Side) *If 4 Holes(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height H(mm) | - | - | - | - | - | - | 75 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Additional Function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body, Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Handle Thickness D(mm) | - | - | - | - | - | 8 ～ 10 | 18 | 8 ～ 12 | 6 ～ 16 | - | - | - | - | - | - | 30 | - | 30 | 28 | - | - | - | 20 ～ 30 | 8 ～ 12 | 8 ～ 16 | - | 18 ～ 25 | - | - | 8 ～ 12 | - | 20 ～ 28 | - | 28 | 20 ～ 30 | - | - | 10 | 28 ～ 36 | - | 20 ～ 28 | 20 ～ 28 | 12 ～ 16 | 8 ～ 20 | 30 |
| Handle Cross Sectional Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Main Body Type
-
Surfaced Type Category
-
U-shaped Type
-
Pitch P(mm)
- 5
- 10
- 15
- 17
- 18
- 20
- 22
- 23
- 25
- 30
- 32
- 37.5
- 39
- 40
- 42
- 44
- 45
- 48
- 48.5
- 50
- 53
- 55
- 56
- 58
- 60
- 62
- 64
- 65
- 66
- 68
- 70
- 72.5
- 74
- 75
- 75.5
- 76
- 78
- 80
- 82
- 84
- 85
- 86
- 86±0.5
- 87
- 88
- 88±0.5
- 90
- 90-95
- 93.5
- 93.5±0.5
- 93.5±0.6
- 94
- 94±0.5
- 95.5±0.5
- 96
- 98
- 99
- 100
- 102
- 104
- 105
- 105±0.5
- 106
- 107
- 108
- 109
- 110
- 112
- 112-117
- 114
- 115
- 116
- 117
- 117±0.5
- 117±1
- 118
- 118±0.2
- 119
- 120
- 120±0.5
- 120÷122±1
- 122
- 122±1
- 125
- 126
- 128
- 129
- 130
- 132
- 132±0.5
- 132±1
- 132±2
- 133
- 135
- 136
- 138
- 140
- 140±1
- 147.5
- 148
- 149÷152±1
- 150
- 150±0.5
- 150±1
- 152
- 158
- 160
- 160±1
- 161
- 164
- 165
- 166
- 170
- 172
- 177-182
- 179
- 179±1
- 180
- 180±0.5
- 184
- 187
- 188
- 190
- 192
- 196
- 198
- 200
- 210
- 215
- 218
- 220
- 228
- 235
- 235±1
- 238
- 239
- 240
- 250
- 253
- 253.5
- 260
- 269
- 270
- 288
- 300
- 300±1
- 302
- 310
- 340
- 350
- 360
- 370
- 375
- 380
- 400
- 425
- 440
- 450
- 460
- 470
- 480
- 500
- 540
- 560
- 570
- 600
- 640
- 700
- 740
- 800
- 840
- 940
- 1000
-
Main Body Material
- EN 1.4301 Equiv.
- ABS
- Aluminum
- Aluminum + Resin
- Brass
- EPDM
- Elastomer
- Nylon
- Others
- PVC
- Phenol
- Plastic
- Polyamide
- Polycarbonate
- Polypropylene
- Polystyrene
- Polyurethane
- Stainless Steel
- Steel
- Zinc Alloy
- Zinc Die Cast
-
Pitch P2 (Short Side) *If 4 Holes(mm)
-
Height H(mm)
- 0.7
- 0.8
- 2
- 2.5
- 3.5
- 4.5
- 8
- 8.5
- 9
- 10
- 15
- 15.5
- 16
- 17
- 18
- 19
- 20
- 21
- 21.5
- 22
- 23
- 23.5
- 25
- 26
- 27
- 27.5
- 28
- 29
- 30
- 31
- 31.5
- 32
- 33
- 33.5
- 34
- 35
- 36
- 36.5
- 37
- 37.75
- 38
- 38.5
- 39
- 39.25
- 40
- 41
- 41.4
- 41.5
- 42
- 43
- 43.3
- 43.5
- 44
- 44.5
- 45
- 45.5
- 46
- 46.5
- 47
- 48
- 48.5
- 49
- 50
- 50.2
- 50.5
- 51
- 52
- 52.5
- 52.75
- 53
- 53.4
- 53.5
- 54
- 55
- 55.5
- 56
- 57
- 57.5
- 58
- 58.5
- 59
- 60
- 60.75
- 61
- 61.5
- 62
- 62.25
- 63
- 64
- 64.5
- 65
- 66
- 66.5
- 67
- 68
- 68.5
- 69
- 70
- 71
- 75
- 76
- 77
- 78
- 80
- 85
- 85.5
- 86
- 87
- 87.75
- 90
- 98
- 100
-
Additional Function
-
Main Body, Surface Treatment
-
Mounting Method
- Threads
- Tapped
- Round Hole
- Weld-On
- One-Touch
- Others
-
Handle Thickness D(mm)
-
Handle Cross Sectional Shape
Narrow search by specifying Brand
-
- MISUMI (60)
- TAKIGEN (143)
- ROHDE (127)
- KIPP (124)
- ESCO (109)
- GANTER (73)
- ELESA (43)
- NABEYA BI-TECH (32)
- KONISHI MFG (12)
- HALDER (8)
- TRUSCO NAKAYAMA (7)
- FLAIR (2)
- HILOGIK (2)
- MARUKI HARDWARE (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Handles / Bow handles / Cup handles / Trough handles / Carrying handles
-
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hooks and Shackels
- Handles
- Clamping Knobs
- Clamping Levers
- Rotation Handles, Crank Handles
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
- Building Hardware / Interiors / Exteriors
-
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.