Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

GANTER Hinges

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Flat hinges / conical countersinks / stainless steel / GN 237 / GANTER

GANTER

GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	11.44 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat hinges / conical countersinks / asymmetrical / material selectable / coating selectable / GN 237 / GANTER

GANTER

Hinges GN 237 with extended hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the attachment bore holes.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Torque hinges / conical countersinks / zinc die-cast / GN 437 / GANTER

GANTER

The setscrew in the hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole of the rotating range. The rotation of doors and flaps is so inhibited, also preventing the inadvertent movement.
The friction torque is accomplished by interlocking two slim friction cones. The large friction surface and the hard-wearing plastic of the friction cones guarantee a long service life with virtually constant stiffness.
Owing to the structure and the prestress of the friction cones, the hinge has virtually no radial play and no play at all in axial direction.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.92 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Multi-pivot hinges / slotted holes / 7-axis / rolled / stainless steel / matt polished / GN 1362 / GANTER

GANTER

Stainless Steel-Multiple-joint hinges GN 7237 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 180°, which provides optimal accessibility and avoids the blocking of escape routes by open doors, for example.

Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.
Stainless Steel-Multiple-joint hinges are generally used in pairs, meaning that one type L and one type R are used per opening. For higher loads, e.g. from large hatches, these can be supplemented with additional hinges of either type.

Volume Discount

Starting from^∗ ：	107.10 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat hinges / conical recesses / -90°, 180° / material selectable / coating selectable / GANTER

GANTER

GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.96 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Corner hinges, plug-in / weldable / brass Spacer rings / steel / GN 128 / GANTER

GANTER

Hinges GN 128 are produced from drawn weldable profiled steel extrusions.
Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel pin allows the easy installation when attaching several hinges in parallel or if the door is very heavy.
The upper half of Type STS hinge has an additional lubricating nipple DIN 71412-D which allows the hinges to be lubricated without dismantling the hinges.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	2.54 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Corner hinges / screw bolt / steel / GN 129 / GANTER

GANTER

Hinges GN 129 are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door.
In the two-part design, the door can be unhinged with two identically arranged hinges.
The three-part hinges, which generally cannot be unhinged and are mounted inside, are suitable for doors and flaps which, as anti-tamper precaution, must not be dismountable from the outside.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.90 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat hinges / unpunched / weldable / rolled / stainless steel / blank / GN 1362 / GANTER

GANTER

Stainless Steel-Sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.

Volume Discount

Starting from^∗ ：	5.26 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat hinges / oblong holes / stainless steel / GN 7237 / GANTER

GANTER

Stainless Steel-Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head.Thanks to sufficient space (installation space) available for screw heads and washers, the hinges can be opened by 180° without collision.The hinge drill pattern corresponds with that of the GN 237 hinge family, which allows the hinges to be exchangeable.

Volume Discount

Starting from^∗ ：	17.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Corner hinges / screw bolts / steel / GN 129.2 / GANTER

GANTER

Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	16.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat hinges / conical countersinks / rolled / steel / galvanised, blue passivated / GN 136 / GANTER

GANTER

Sheet metal hinges GN 136 are low-cost designs for low-load applications.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	2.28 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Corner hinges / screw bolts / stainless steel / GN 129.5 / GANTER

GANTER

Stainless Steel-Hinges GN 129.5 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	26.94 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat hinges / asymmetrical / rolled / stainless steel / blank, galvanised, blue passivated / GN 136 / GANTER

GANTER

GN 136 Stainless Steel-Sheet metal hinges are available in many different versions and are suitable for light to medium-duty applications.Type A can be fixed in place by welding or by using holes made by the customer.

Volume Discount

Starting from^∗ ：	3.26 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat hinges / slotted holes / zinc die-cast / GN 1366 / GANTER

GANTER

Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head.Thanks to sufficient space (installation space) available for screw heads and washers, the hinges can be opened by 180° without collision.The hinge drill pattern corresponds with that of the GN 237 hinge family, which allows the hinges to be exchangeable.

Volume Discount

Starting from^∗ ：	11.78 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Corner hinges / cylinder countersinks / steel / GN 129.3 / GANTER

GANTER

Hinges GN 129.3 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
By using cylinder screws DIN 912, they are conveniently fixed using threads on the user side or by using through screws for different clamping thicknesses.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	23.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 138 / GANTER

GANTER

With their attractive design, hinges GN 138 are suitable for use in plant and machinery where a well-designed and stylish appearance is important.
The concealed and tamper-proof mounting from the rear highlights and enhances the special appearance of the hinge.
The dimensions l1 / l2 and the drill hole spacings m1 / m2 match the usual hinges GN 237 / GN 237.1 and can replace these.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.74 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flat hinges / tapered / zinc die-cast / GN 238 / GANTER

GANTER

The adjustable hinges GN 238 allow the technically and visually perfect positioning and alignment of a door in its frame.
The steel adjusting disc has a cutting ring in its underside which cuts into the radial fins of the zinc die-cast wings when the countersunk screw is tightened, virtually creating a form-lock that prevents adjusting the hinge after mounting.
The covers conceal the fixing elements and lend the hinge an attractive optical appearance.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	11.66 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Corner hinges / screw bolts / stainless steel / GN 129.2 / GANTER

GANTER

Stainless Steel-Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	32.70 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat hinges / unperforated / rolled / stainless steel / blank / GN 136 / GANTER

GANTER

Stainless Steel-Sheet metal hinges GN 136 are low-cost designs for low-load applications.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	3.18 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

heavy-duty hinges/ horizontally stretched / stainless steel

GANTER

Volume Discount

Starting from^∗ ：	27.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Corner hinges, plug-in / weldable / brass spacers / aluminium / GN 128.2 / GANTER

GANTER

Hinges GN 128.2 are produced from drawn weldable profiled Aluminuim extrusions.
The pin is fixed in the lower half.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 139.1 / GANTER

GANTER

Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).
The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).
Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	168.64 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Door hinges / internal thread / zinc die-cast / GN 139.2 / GANTER

GANTER

With the exception of the connector plug, hinges without safety switch GN 139.2 do not differ in their external appearance from hinges with safety switch GN 139.1. With the concealed screw connection at the back, the hinge is also tamper-proof.
The compact design combines safety and attractive appearance.
The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	41.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flat plug-in hinges / conical recesses / -90°, 180° / stainless steel / GN 337 / GANTER

GANTER

Stainless Steel-Hinges detachable

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	17.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat hinges / asymmetrical / rolled / stainless steel / blank / GN 1364 / GANTER

GANTER

Pointed Stainless Steel-Sheet metal hinges GN 1364 are characterized by their compact and universal dimensioning as well as their attractively shaped design. The materials used also permit applications in aggressive environments.Type B is fastened via the existing through-holes using screws or rivets.

Volume Discount

Starting from^∗ ：	9.06 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Multi-pivot hinges / internal / opening angle Aluminium

GANTER

Volume Discount

Starting from^∗ ：	311.38 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Hinges for welding / stainless steel

GANTER

Volume Discount

Starting from^∗ ：	22.48 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Door hinges with safety switch / internal thread / stainless steel / GN 139.5, Type CK / GANTER

GANTER

Hinges GN 139.5 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO). The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable.
Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof. Hinges GN 139.6 without switching function act as additional hinges, e.g. for larger doors or gates where several hinges are required.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	648.68 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat plug-in hinges / conical countersinks / zinc / GN 337 / GANTER

GANTER

Hinges detachable, Zinc die casting

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.76 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat hinges / slotted holes / asymmetrical / zinc die-cast / GN 161 / GANTER

GANTER

Hinges GN 161 have been designed for commercially available profile rails.
With three different types of hinges only, 66 different groove distances „n“ can be accommodated. To achieve this the positioning elements are set in specially marked recesses in the hinge wings.
The rectangular (8x10 mm) positioning elements, two pieces per hinge wing, will prevent a misalignment. They will also carry the weight of the door.
For screwing the hinges onto the profile rails, special T-Nuts are used.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	15.22 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Door hinges / internal thread / zinc die-cast / GN 139.2, type AK,CK / GANTER

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	165.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Door hinges with safety switch / internal thread / stainless steel / GN 139.5, Type A,B,C / GANTER

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	654.80 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat hinges / conical countersinks, compensating element / adjusting inserts / adjusting inserts / zinc die-cast / GN 127 / GANTER

GANTER

Hinges GN 127 allow the technically and visually perfect positioning and alignment of a door in its frame.
The serrations at the wings of the hinge and at the adjusting bushes create a form lock which prevents the hinge from moving after installation. The tips of the arrows mark the 0 reference point for easier installation.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	18.66 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Corner hinges, plug-in / internal thread / Zinc / GN 161.1 / GANTER

GANTER

Hinges GN 161.1 are a variant with highly attractive design. The fixing screws are invisible.
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force.
For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition.
The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Corner hinges, plug-in / internal thread / Zinc / GN 161.2 / GANTER

GANTER

Hinges GN 161.2 are a variant with highly attractive design. The fixing screws are invisible.
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force. For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hinge base plates / angle / zinc die-cast / 139.4-101 / GANTER

GANTER

The angled mounting plate GN 139.4 allows the hinges GN 139.1 / GN 139.2 to be attached between frame and door, i.e. the door gap.
The long slotted holes allow the attachment to profile
systems.
Countersunk screws for fixing the hinges to the mounting plate are
included part of the order.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	25.04 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hinge Base Plates / slotted holes / steel / zinc plated / 139.3-170 / GANTER

GANTER

The flat mounting plate GN 139.3 allows the hinges GN 139.1 / GN 139.2 to be attached from the front.
The long slotted holes allow the attachment to profile
s ystems.
Countersunk screws for fixing the hinges to the mounting plate are
included part of the order.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	35.96 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Door hinges / internal thread / stainless steel / 139.6-76-126 / GANTER

GANTER

With the exception of the connector plug, the hinge without safety switch GN 139.6 do not differ in their external appearance from hinges with safety switch GN 139.5. With the concealed screw connection at the back, the hinge is also tamper-proof.
The compact design combines safety and attractive appearance.
The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	498.10 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Corner hinges, plug-in / weldable / brass intermediate rings / stainless steel / GN 128.2 / GANTER

GANTER

Hinges GN 128.2 are produced from drawn weldable profiled Stainless Steel extrusions.
The pin is fixed in the lower half.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	16.20 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat hinges / asymmetrical / rolled / steel / zinc plated, blue passivated / GN 235 / GANTER

GANTER

GN 136 sheet metal hinges are available in many different versions and are suitable for light to medium-duty applications.

Volume Discount

Starting from^∗ ：	2.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat hinges / unpunched / weldable / rolled / steel / blank / GN 1366 / GANTER

GANTER

Hinges GN 1366 are made of rolled or drawn steel profiles and are very robust.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.

Volume Discount

Starting from^∗ ：	11.48 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Stainless Steel-Plates threaded studs, hinges GN GN GN

GANTER

Volume Discount

Starting from^∗ ：	11.44 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Stainless Steel-Plates tapped holes, hinges GN GN GN

GANTER

Volume Discount

Starting from^∗ ：	9.20 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Hinges, aluminium profiles / panel elements, three-part

GANTER

Volume Discount

Starting from^∗ ：	28.96 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Multi-link hinges / stainless steel / GN 7237

GANTER

Volume Discount

Starting from^∗ ：	105.98 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Main Body Type
Flat Hinge Type
Detachable Flag Hinges Type
Length L *Figure in () is the min length of the adjustable type.(mm)
Operating Environment
Main Body Material
Main Body Surface Treatment
Width W(mm)
Additional Function
Reversed
Mounting Method
Mounting Screw Hole Type


Brand	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Flat hinges / conical countersinks / stainless steel / GN 237 / GANTER	Flat hinges / conical countersinks / asymmetrical / material selectable / coating selectable / GN 237 / GANTER	Torque hinges / conical countersinks / zinc die-cast / GN 437 / GANTER	Multi-pivot hinges / slotted holes / 7-axis / rolled / stainless steel / matt polished / GN 1362 / GANTER	Flat hinges / conical recesses / -90°, 180° / material selectable / coating selectable / GANTER	Corner hinges, plug-in / weldable / brass Spacer rings / steel / GN 128 / GANTER	Corner hinges / screw bolt / steel / GN 129 / GANTER	Flat hinges / unpunched / weldable / rolled / stainless steel / blank / GN 1362 / GANTER	Flat hinges / oblong holes / stainless steel / GN 7237 / GANTER	Corner hinges / screw bolts / steel / GN 129.2 / GANTER	Flat hinges / conical countersinks / rolled / steel / galvanised, blue passivated / GN 136 / GANTER	Corner hinges / screw bolts / stainless steel / GN 129.5 / GANTER	Flat hinges / asymmetrical / rolled / stainless steel / blank, galvanised, blue passivated / GN 136 / GANTER	Flat hinges / slotted holes / zinc die-cast / GN 1366 / GANTER	Corner hinges / cylinder countersinks / steel / GN 129.3 / GANTER	Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 138 / GANTER	Flat hinges / tapered / zinc die-cast / GN 238 / GANTER	Corner hinges / screw bolts / stainless steel / GN 129.2 / GANTER	Flat hinges / unperforated / rolled / stainless steel / blank / GN 136 / GANTER	heavy-duty hinges/ horizontally stretched / stainless steel	Corner hinges, plug-in / weldable / brass spacers / aluminium / GN 128.2 / GANTER	Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 139.1 / GANTER	Door hinges / internal thread / zinc die-cast / GN 139.2 / GANTER	Flat plug-in hinges / conical recesses / -90°, 180° / stainless steel / GN 337 / GANTER	Flat hinges / asymmetrical / rolled / stainless steel / blank / GN 1364 / GANTER	Multi-pivot hinges / internal / opening angle Aluminium	Hinges for welding / stainless steel	Door hinges with safety switch / internal thread / stainless steel / GN 139.5, Type CK / GANTER	Flat plug-in hinges / conical countersinks / zinc / GN 337 / GANTER	Flat hinges / slotted holes / asymmetrical / zinc die-cast / GN 161 / GANTER	Door hinges / internal thread / zinc die-cast / GN 139.2, type AK,CK / GANTER	Door hinges with safety switch / internal thread / stainless steel / GN 139.5, Type A,B,C / GANTER	Flat hinges / conical countersinks, compensating element / adjusting inserts / adjusting inserts / zinc die-cast / GN 127 / GANTER	Corner hinges, plug-in / internal thread / Zinc / GN 161.1 / GANTER	Corner hinges, plug-in / internal thread / Zinc / GN 161.2 / GANTER	Hinge base plates / angle / zinc die-cast / 139.4-101 / GANTER	Hinge Base Plates / slotted holes / steel / zinc plated / 139.3-170 / GANTER	Door hinges / internal thread / stainless steel / 139.6-76-126 / GANTER	Corner hinges, plug-in / weldable / brass intermediate rings / stainless steel / GN 128.2 / GANTER	Flat hinges / asymmetrical / rolled / steel / zinc plated, blue passivated / GN 235 / GANTER	Flat hinges / unpunched / weldable / rolled / steel / blank / GN 1366 / GANTER	Stainless Steel-Plates threaded studs, hinges GN GN GN	Stainless Steel-Plates tapped holes, hinges GN GN GN	Hinges, aluminium profiles / panel elements, three-part	Multi-link hinges / stainless steel / GN 7237
CAD	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D				2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	11.44 € *Unit price with basic configuration Volume Discount	7.50 € *Unit price with basic configuration Volume Discount	9.92 € *Unit price with basic configuration Volume Discount	107.10 € *Unit price with basic configuration Volume Discount	5.96 € *Unit price with basic configuration Volume Discount	2.54 € *Unit price with basic configuration Volume Discount	8.90 € *Unit price with basic configuration Volume Discount	5.26 € *Unit price with basic configuration Volume Discount	17.04 € *Unit price with basic configuration Volume Discount	16.98 € *Unit price with basic configuration Volume Discount	2.28 € *Unit price with basic configuration Volume Discount	26.94 € *Unit price with basic configuration Volume Discount	3.26 € *Unit price with basic configuration Volume Discount	11.78 € *Unit price with basic configuration Volume Discount	23.36 € *Unit price with basic configuration Volume Discount	8.74 € *Unit price with basic configuration Volume Discount	11.66 € *Unit price with basic configuration Volume Discount	32.70 € *Unit price with basic configuration Volume Discount	3.18 € *Unit price with basic configuration Volume Discount	27.60 € *Unit price with basic configuration Volume Discount	5.46 € *Unit price with basic configuration Volume Discount	168.64 € *Unit price with basic configuration Volume Discount	41.76 € *Unit price with basic configuration Volume Discount	17.20 € *Unit price with basic configuration Volume Discount	9.06 € *Unit price with basic configuration Volume Discount	311.38 € *Unit price with basic configuration Volume Discount	22.48 € *Unit price with basic configuration Volume Discount	648.68 € *Unit price with basic configuration Volume Discount	9.76 € *Unit price with basic configuration Volume Discount	15.22 € *Unit price with basic configuration Volume Discount	165.90 € *Unit price with basic configuration Volume Discount	654.80 € *Unit price with basic configuration Volume Discount	18.66 € *Unit price with basic configuration Volume Discount	9.62 € *Unit price with basic configuration Volume Discount	10.88 € *Unit price with basic configuration Volume Discount	25.04 € *Unit price with basic configuration Volume Discount	35.96 € *Unit price with basic configuration Volume Discount	498.10 € *Unit price with basic configuration Volume Discount	16.20 € *Unit price with basic configuration Volume Discount	2.50 € *Unit price with basic configuration Volume Discount	11.48 € *Unit price with basic configuration Volume Discount	11.44 € *Unit price with basic configuration Volume Discount	9.20 € *Unit price with basic configuration Volume Discount	28.96 € *Unit price with basic configuration Volume Discount	105.98 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	Same day	Same day	Same day	5 Days	Same day	Same day	Same day	Same day	Same day	5 Days	Same day	5 Days	Same day	Same day	4 Days	4 Days	Same day	5 Days	Same day	7 Days	5 Days	5 Days	4 Days	5 Days	5 Days	9 Days	7 Days	5 Days	5 Days	Same day	5 Days	5 Days	4 Days	4 Days	5 Days	5 Days	5 Days	5 Days	Same day	Same day	5 Days	7 Days	7 Days	9 Days	7 Days
Main Body Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Flat Hinge Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Detachable Flag Hinges Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Length L *Figure in () is the min length of the adjustable type.(mm)	30 ～ 60	50 ～ 60	40 ～ 60	26 ～ 40	30 ～ 60	-	-	30 ～ 100	45 ～ 65	40 ～ 51	30 ～ 90	-	30 ～ 60	45 ～ 65	55	42 ～ 62	42 ～ 60	40 ～ 51	30 ～ 90	-	-	101	101	40 ～ 60	50	-	-	126	40 ～ 60	-	101	126	60	-	-	-	-	126	-	30 ～ 60	30 ～ 100	-	-	-	-
Operating Environment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Main Body Material	Stainless Steel	Stainless Steel / Zinc Alloy	Zinc Alloy	Stainless Steel	Aluminum / Zinc Alloy	-	-	Stainless Steel	Stainless Steel	Steel	Steel	Stainless Steel	Stainless Steel	Zinc Alloy	Steel	Zinc Alloy	-	Stainless Steel	Stainless Steel	-	Aluminum	-	-	Stainless Steel	Stainless Steel	-	-	-	Zinc Alloy	-	-	-	-	-	-	-	-	-	Stainless Steel	Steel	Steel	-	-	-	-
Main Body Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Width W(mm)	30 ～ 60	63 ～ 120	40 ～ 60	-	30 ～ 60	40 ～ 200	-	60 ～ 100	40 ～ 76	45 ～ 61	30 ～ 60	-	45 ～ 120	40 ～ 76	66 ～ 91	40 ～ 60	42 ～ 60	45 ～ 50	30 ～ 60	-	60 ～ 180	49 ～ 79	49 ～ 79	40 ～ 60	70	-	-	76	40 ～ 60	57 ～ 80	49 ～ 79	76	76	63	63	101	170	76	60 ～ 180	45 ～ 120	60 ～ 220	-	-	-	-
Additional Function	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Reversed	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Screw Hole Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Main Body Type
- Flat Hinges
- Detachable Hinges
- Free Spring Hinges
- Hidden Type
- Pivot Type
- Rotary Type
- Leaf Type
- Special Shape
- Damper/Torque/Spring Hinge
- Glass Hinges
- Related Components
Images

Clear

Flat Hinge Type
- Square Plate Type
- Parallel Type
- Stepped Type (One Way Foldable)
- Stepped Type (Both Way Foldable)
- Long Hinges
- Machine Type
Images

Clear

Detachable Flag Hinges Type
- Standard
- Simplified Detachable Type
- Flag Type
- Tension Type
- Stepped Type
Images

Clear

Length L *Figure in () is the min length of the adjustable type.(mm)
2,000

6

6.5

10

17

18

19

20

21

22

23

23.5

24

25

25.5

26

27.5

29

30

30.5

31

31.5

32

33

34

35

36

38

39

39.5

40

40.5

41

42

43

44

45

46

47

48

48.5

49.5

50

50.5

51

52

53

54

54.5

55

56

57

59

60

61

62

63

63.4

63.5

64

65

66

67

68

70

71

71.7

72

73

75

75.5

76

76.5

76.7

77

78

79

80

81

81.7

82

83

84

85

86

86.7

87

87.5

88

89

90

92

94

95

95.3

96

96.5

97

100

101

101.2

101.5

101.7

102

103

104

106

107

108

109

110

113

114

114.5

115

117.5

118

120

121

123

124

125

126

126.5

127

130

132

132.5

138

139

139.7

140

144

145

148

149

150

151

152

152.5

153

154

155

158

160

161

161.5

162

170

183

184

186

186.4

190

200

201

204

210

222.3

224

225

250

258

264

289.3

300

340

350

400

442

450

476

576

600

626

750

850

900

1000

1200

1800

1829

1872

2000

2133

2400

2500
Drawing

Clear

Operating Environment
- Standard
- Corrosion Resistance
- Abrasion Resistance
- Cleanroom
Clear

Main Body Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Zinc Alloy
- Resin
Clear

Main Body Surface Treatment
- Not Provided
- Buffed Surface
- Tumble Polish
- Nickel Plating
- Chrome Plating
- Glossy Chromate
- Colored Chromate
- Brushed
- Clear Anodize
- Gold Plating
- Satin
- Bronze Plating
- Coating
- Mirror Surface
- Shot Blasting
- Trivalent Chromate
- Zinc Plating
- Grain-finished
- Electrolytic Polishing
Clear

Width W(mm)
6

8

10.6

11

11.5

12

13

14

14.5

15

16

16.8

17

17.5

18

18.5

19

19.5

20

21

22

22.3

22.5

23

24

24.5

25

25.3

26

26.5

27

28

28.5

29

29.5

30

30.5

31

31.8

32

32.4

33

33.5

34

34.5

35

35.5

36

36.5

37

38

38.5

39

39.5

40

40.2

40.5

41

41.5

42

43

44

44.5

44.75

45

45.5

46

46.5

47

47.5

47.8

48

49

49.5

50

51

51.4

51.5

51.6

52

53

53.5

54

54.25

55

55.5

56

56.5

57

57.5

57.8

59

60

61

62

63

63.5

64

65

65.5

66

66.4

66.5

67

67.5

67.7

68

69

69.1

69.5

70

71

72

73

74

75

76

78

79

79.4

80

81

81.5

82

82.5

83

83.5

83.7

84

85

86

86.3

87

88

89

90

91

92

94

95

96

97

97.5

98

99

100

101

102

102.5

104

105

106

107

108

109

110

112

114

115

116

118

119

120

124

125

126

127

128

130

132

133

134

134.6

135

136

139

140

142

145

149

150

153

155

158

160

164

168

170

174

179

180

181

185

190

197

198

200

202

210

212

216

218

220

230

233.5

236.5

240

260

267

274.5

276

280

282

313

342.5
Drawing

Clear

Additional Function
- Not Provided
- With Damper
- With Stopper
- With Catches
- Bearing Built-in
- With Torque Function
- Spring Built-in
- With Fixing Function
- Others
Details

Clear

Reversed
- For Right Side
- For Left Side
- For Both Right and Left Sides
Clear

Mounting Method
- Screw Mounting
- Weld-On
- Others
Clear

Mounting Screw Hole Type
- With Screws
- Round Hole
- Countersunk Holes
- Slotted Hole
- Counterbored
- Tapped
- Others
Clear

Narrow search by specifying Brand

- MISUMI (41)
- Cost Efficient Products ()
- TAKIGEN (365)
- GANTER (53)
- ELESA (32)
- FUJI LATEX (29)
- TRUSCO NAKAYAMA (26)
- SOWA (21)
- HALDER (20)
- TOK BEARING (16)
- KIPP (9)
- HILOGIK (6)
- 999SHIMANO (5)
- WAKISANGYO (5)
- ACCURATE (3)
- BEST (2)
- KYODO KINZOKU (1)
- ESCO (1)
- IMAO CORPORATION (1)
Clear