Rotation Handles, Crank Handles（Page 5）

?* Information on days to ship and prices

• 

  Disc handwheels, Aluminium, plastic coated

  GANTER

  Disc handwheels GN 923 are distinguished by modern design.
  
  The removable plastic cover shrouds the fixing components such as screws, countersunk washers as well as the shaft end.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Handwheels with retractable handle, Handle locked

  GANTER

  The handle in these handwheels is locked in a conical bore in the operating position. For reversal, it must first be pulled from the cone in axial direction.
  
  A pressure spring holds the handle in both positions. When swung out, it automatically engages again.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Handwheels GN 322.7 are suitable for applications where the handle must not remain in the operating position. In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position.
  By maintaining the forward thrust on the handle the handwheel can easily be rotated. When releasing the handle the springs returns it back to the retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	74.08 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Retractable handwheels GN 923.7 are distinguished by modern design.
  
  These andwheels are suitable for applications where the handle must not remain in the operating position.
  
  In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position. By maintaining the forward thrust on the handle the handwheel can easily be rotated.
  
  When releasing the handle the springs returns it back to the retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	65.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Retractable handwheels GN 924.7 are distinguished by modern design.
  
  These handwheels are suitable for applications where the handle must not remain in the operating position.
  
  In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position. By maintaining the forward thrust on the handle the handwheel can easily be rotated.
  
  When releasing the handle the springs returns it back to the retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	66.06 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Handwheels, matt, black plastic coated

  GANTER

  Handwheels, matt, black plastic coated

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Safety handwheels with needle bearing

  GANTER

  The use of coupling attachments in handwheels other than specified is also possible.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	163.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Safety handwheels, Aluminium

  GANTER

  The hub cap protects the bearing from the ingress of dust and at the same time acts as a shroud for the mounting components.
  The wheel hub is fitted with an inside groove to retain the hub cap on its segmented edge.
  The hub cap is pushed into position by hand and it can be removed by levering it away at the relieved point with a screw driver.
  The needle bearings are greased on assembly which should be ample for permanent lubrication.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	162.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Safety handwheels, fixed fearing flange

  GANTER

  GN 327 safety handwheels feature the ultimate in health and safety at work standards because the handwheel, if disengaged, is mounted on a fixed component, the bearing flange. The wheel is fully disengaged from the rotating shaft.
  The bearing flange can also accept the bearing of the shaft via the bearing bushing (code No. 1). This bearing bushing is a dry bearing (DU bushing). Normally, the shaft has a separate bearing and the bearing bushing serves to center the bearing flange.
  Centering can also be effected by a centering ring (code No. 2) if the appropriate bore hole has been made at the machine side. In this case there is no need for the bearing bushes and no bearing friction (heating) will occur.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	335.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spoked handwheels, Aluminium, plastic coated

  GANTER

  Spoked handwheels GN 924 are distinguished by modern design.
  
  The removable plastic cover shrouds the fixing components such as screws, countersunk washers as well as the shaft end.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.72 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spoked handwheels, blank, rim polished

  GANTER

  Spoked handwheels, blank, rim polished

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tri-ball handles, Steel

  GANTER

  Tri-ball handles GN 10 allow fine adjustment.
  An alternative in modern design are cranked handles GN 510 and control handles GN 112.1.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  EBR-CH - Handle with safety locking device -Technopolymer

  ELESA

  Handle with safety lock in glass fibre reinforced polyamide-based technopolymer with grey-black anti-intrusion profile key slot, acetal-based technopolymer button with red cylindrical part, key capture device with ball and spring in AISI 316 stainless steel and ECA caps in technopolymer in Ergostyle colours.
  The door can only be opened by inserting the anti-intrusion profile key in the appropriate seat.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  EKH. - Crank handles -Technopolymer

  ELESA

  Crank handles.
  Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish.
  Glass-fibre reinforced polyamide based (PA) technopolymer hub cap, in Ergostyle colours, matte finish, press-fit assembly.
  Black-oxide steel hub, H7 reamed hole.
  with revolving handle.
  The crank is also suitable to tighten to a high torque.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  EMW. - Monospoke handwheels -Technopolymer

  ELESA

  Monospoke handwheels.
  Glass-fibre reinforced polypropylene based (PP) technopolymer, black colour, matte finish.
  black-oxide steel boss, H7 reamed hole.
  Available with various types of handles.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	110.11 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ETK. - Three-arm handwheel -Technopolymer

  ELESA

  Three-arm handwheel
  Glass-fibre reinforced polypropylene based (PP) technopolymer, black colour, matte finish.
  Boss cap in polyester based technopolymer (PBT) in Ergostyle colours, press-fit assembly.
  black-oxide steel boss, H7 reamed hole.
  The three 120° arms allow for maximum ease of operation.
  The design of the ETK handwheel offers an excellent level of safety for the hands during manoeuvring operations.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	107.78 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  ME. - Balanced crank handles -Duroplast

  ELESA

  Balanced crank handles.
  Reinforced phenolic based (PF) Duroplast.
  Polyamide based (PA) technopolymer for ME.95.
  Balancing by means of an incorporated counterweight.
  black-oxide steel boss, H7 reamed hole.
  Reamed hole provided with centres already drilled for pinning to shaft.
  With revolving handle in Duroplast.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  METP. - Balanced crank handle -Technopolymer

  ELESA

  Balanced crank handle.
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
  Balancing by means of an incorporated counterweight.
  black-oxide steel boss, H7 reamed hole.
  Reamed hole provided with centres already drilled for pinning to shaft.
  with revolving handle.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	44.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  VBR.2 - Two-arm handwheels -Technopolymer and steel

  ELESA

  Two-arm handwheels.
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, glossy finish.
  Matte chrome-plated steel arms complete with handles type I.622 in technopolymer.
  Black-oxide steel boss, uncovered front end with pre-drilled pass-through hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  VDN.FP - Solid handwheels -Duroplast

  ELESA

  Solid handwheels.
  High-strength, reinforced phenolic based (PF) Duroplast, black colour, glossy finish.
  Matte anodised aluminium ring.
  Burnished steel hub, solid or with H7 reamed hole.
  Available with several types of handles and with hole and keyway according to DIN 6885/1, tolerance P9.
  The rim with internal rear scallops makes the grip and the manoeuvre of the handwheel easier.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VDN.FP+I+ST - Safety solid handwheels -Duroplast

  ELESA

  Safety solid handwheels.
  High-strength, reinforced phenolic based (PF) Duroplast, black colour, glossy finish.
  Matte anodised aluminium.
  Safety coupling bushing with "Pull-coupling" assembly GN 000.5 hardened steel with ground sliding surfaces, reamed assembly hole and keyway in compliance with DIN 6885/2 tolerance P9.
  I.301+x Duroplast revolving handle.
  The rim with internal rear scallops makes the grip and the manoeuvre of the handwheel easier.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	323.25 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  VDS. - Solid handwheels -Technopolymer

  ELESA

  Solid handwheels.
  High-resilience polypropylene based (PP) technopolymer, black colour, matte finish.
  Acetal resin based (POM) technopolymer boss cap, light grey colour, press-fit assembly.
  Black-oxide steel or stainless steel AISI 304 boss, H7 reamed hole.
  Available with various types of handles.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VDT. - Solid handwheels -Technopolymer

  ELESA

  Solid handwheels.
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
  Acetal resin based (POM) technopolymer boss cap, black colour, matte finish, push-fit assembly.
  black-oxide steel boss, H7 reamed hole.
  Available with several types of handles and with hole and keyway according to DIN 6885/1, tolerance P9.
  The rim with internal rear scallops makes the grip and the manoeuvre of the handwheel easier.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.23 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  VRU. - Spoked handwheels -Duroplast large diameter hub

  ELESA

  Spoked handwheels.
  High-strength, reinforced phenolic based (PF) Duroplast, black colour, glossy finish.
  Large diameter black-oxide steel hub, uncovered front end with spot-drilling.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.43 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Crank Handles, with folding handle

  HALDER

  [Operation]
  In the operating position the handle is locked. To move the handle to the rest position, it must be pulled out axially and flipped round.

  Select to compare

  Configure now
  Starting from∗ ：	34.92 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Pressed steel handwheels, for valves

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Handwheels, made sheet steel

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Crank handles aluminium (K0727)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Revolving grip, thermoplastic
  
  · Black powder-coated.
  
  · Revolving grip, black

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles aluminium with fold-away grip and reamed hole (K0997)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: reamed hole

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles aluminium with safety grip and reamed hole (K0998)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: reamed hole
  
  · Swivels back automatically after releasing

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles balanced (K0728)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Various versions

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles offset similar to DIN 468, Form F, with fixed grip (K0684)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Form F: crank handle with fixed grip

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles revolving grip square socket (K0996)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Version: square socket

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles with fold-away grip, with keyway (K0266)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · The NOVO grip product range represents an attractive design and an easy-to-grip form
  
  · Axial and radial fastening options
  
  · Version: with keyway

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles with fold-away grip, with square socket (K0266)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · The NOVO grip product range represents an attractive design and an easy-to-grip form
  
  · Axial and radial fastening options
  
  · Version: square socket

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.72 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Crank handles with fold-away grip, without keyway (K0266)

  KIPP

  · For long adjustment travel
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · The NOVO grip product range represents an attractive design and an easy-to-grip form
  
  · Axial and radial fastening options
  
  · Version: without keyway

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Deltawheels (K0275)

  KIPP

  · Control element for positioning and adjusting shafts and spindles
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · Secure and comfortable grip
  
  · The NOVO grip product range represents an attractive design and an easy-to-grip form
  
  · Various colours, fibreglass reinforced

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Disc handwheels with revolving grip, Form D, pre-drilled (K0164)

  KIPP

  · Control element for positioning and adjusting shafts and spindles
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · For opening, closing and operating valves in fittings, machine tools
  
  · Form D: pre-drilled
  
  · Hub, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Disc handwheels with revolving grip, Form E, with reamed hole (K0164)

  KIPP

  · Control element for positioning and adjusting shafts and spindles
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · For opening, closing and operating valves in fittings, machine tools
  
  · Form E: with reamed hole
  
  · Hub, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Disc handwheels with revolving grip, steel parts stainless steel, Form D, pre-drilled (K0164)

  KIPP

  · Control element for positioning and adjusting shafts and spindles
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · For opening, closing and operating valves in fittings, machine tools
  
  · Form D: pre-drilled
  
  · Hub, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Disc handwheels with revolving grip, steel parts stainless steel, Form E, with reamed hole (K0164)

  KIPP

  · Control element for positioning and adjusting shafts and spindles
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · For opening, closing and operating valves in fittings, machine tools
  
  · Form E: with reamed hole
  
  · Hub, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	47.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Disc handwheels without grip, stainless steel bush, Form D, pre-drilled (K0165)

  KIPP

  · Control element for positioning and adjusting shafts and spindles
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · For opening, closing and operating valves in fittings, machine tools
  
  · Form D: pre-drilled
  
  · Hub, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Disc handwheels without grip, stainless steel bush, Form E, with reamed hole (K0165)

  KIPP

  · Control element for positioning and adjusting shafts and spindles
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · For opening, closing and operating valves in fittings, machine tools
  
  · Form E: with reamed hole
  
  · Hub, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Disc handwheels without grip, steel bush, Form D, pre-drilled (K0165)

  KIPP

  · Control element for positioning and adjusting shafts and spindles
  
  · Application sectors: machine, plant, armament and instrument construction, measuring equipment
  
  · For opening, closing and operating valves in fittings, machine tools
  
  · Form D: pre-drilled
  
  · Hub, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hand wheels steel stamped (K1661)

  KIPP

  · Made from a single piece.
  
  · Square hub
  
  · Reinforced hub

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...