Deep groove ball bearings / single row / ZZ / heat resistant, max. 160°C / MISUMI (HHB625ZZ)
Click on this image to zoom in.
Click on this image to zoom in.
Product Details:
Manufacturer part number: HHB625ZZ
Brand: MISUMI
Price: 7.91 €
Delivery time: 5 Days
Technical Data:
I.D. d: 5 φ
O.D. D: 16 φ
Width B (or T): 5 mm
Basic Load Rating Cr (Dynamic): 1470 N
Allowable Rotational Speed: 36000 1/min
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
HHB625ZZ
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
- Technical Information
Back to the Category Ball Bearings
Available dimensions and tolerances can be found under the tab More information.
| Type | Inner and Outer Ring | Shield | Rolling Element | Retainer | |
| Material | Hardness | Material | Material | Material | |
| HHB ZZ | EN 1.4125 Equiv. | 57~63HRC | EN 1.4301 Equiv. | EN 1.4125 Equiv. | EN 1.4301 Equiv. |
For details on the tolerance and allowable values of inner and outer rings, >>P.2243
For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF
| Part Number |
| HHB696ZZ HHB6003ZZ |
Ball Bearing Selection Details
- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated
- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings
- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove
- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed
- Inner diameter: 2 mm to 50 mm
- Outer diameter: 5 mm to 110 mm
Ball bearing designation (suffix):
In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.
- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z
Description/Basics
Rolling bearings
Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.
Grooved ball bearings
Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.
Areas of Application
Ball bearing - chemical resistance
Chemical resistance | Plastic ball | Metal ball | Ceramic ball | |||||
Bearing rings | UHMW | PEEK | PTFE | EN 1.4125 equivalent | EN 1.4301 equivalent | EN 1.4125 equivalent | EN 1.4542 equivalent | |
Cover plate | - | - | - | EN 1.4301 equivalent | EN 1.4301 equivalent | EN 1.4301 equivalent | EN 1.4301 equivalent | |
Bearing balls | Glass | Ceramic | Ceramic | EN 1.4125 equivalent | EN 1.4301 equivalent | Ceramic | Ceramic | |
Ball cage | UHMW | PEEK | PTFE | EN 1.4301 equivalent | EN 1.4301 equivalent | Fluoroplastic | Fluoroplastic | |
Acids | Hydrochloric acid | suitable to a limited extent | good | very good | unsuitable | good | suitable to a limited extent | good |
Sulfuric acid | suitable to a limited extent | good | very good | unsuitable | very good | good | very good | |
Nitric acid | suitable to a limited extent | good | very good | unsuitable | very good | good | very good | |
Bases | unsuitable | very good | very good | unsuitable | very good | good | very good | |
Solvents | very good | very good | very good | unsuitable | very good | good | very good | |
Salt water | very good | very good | very good | unsuitable | very good | good | very good | |
Water | very good | very good | very good | unsuitable | very good | very good | very good | |
Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).
Ball bearing materials
In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.
Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.
Installation Information
An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.
Maintenance
The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| HHB625ZZ |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | I.D. d (φ) | O.D. D (φ) | Width B (or T) (mm) | Basic Load Rating Cr (Dynamic) (N) | Allowable Rotational Speed (1/min) | Basic Load Rating Cor (Static) (N) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
7.91 € | 1 | 5 Days | 10 | 5 | 16 | 5 | 1470 | 36000 | 540 |
Loading...
Back to the Category Ball Bearings
| Part Number | d | D | B | r (min) | Basic Load Rating | Allowable Rotational Speed rpm (Reference) | Relative Dimensions | Mass (g) (Reference) | Unit Price | |||
| Cr (Dynamic) N | Cor (Static) N | Ds (min) | dh (max) | R (max) | ||||||||
| HHB695ZZ | 5 | 13 | 4 | 0.2 | 915 | 346 | 43000 | 6.6 | 11.4 | 0.2 | 2.4 | |
| HHB605ZZ | 14 | 5 | 1130 | 406 | 40000 | 12.4 | 3.5 | |||||
| HHB625ZZ | 16 | 0.3 | 1470 | 540 | 36000 | 7 | 14 | 0.3 | 4.8 | |||
| HHB696ZZ | 6 | 15 | 0.2 | 1139 | 418 | 40000 | 7.6 | 13.4 | 0.2 | 3.8 | ||
| HHB606ZZ | 17 | 6 | 0.3 | 1924 | 677 | 38000 | 8 | 15 | 0.3 | 6.0 | ||
| HHB626ZZ | 19 | 1986 | 717 | 32000 | 17 | 8.1 | ||||||
| HHB698ZZ | 8 | 1901 | 734 | 36000 | 10 | 17 | 7.3 | |||||
| HHB608ZZ | 22 | 7 | 2799 | 1103 | 34000 | 20 | 12 | |||||
| HHB628ZZ | 24 | 8 | 2833 | 1138 | 28000 | 22 | 17 | |||||
| Part Number | d | D | B | r (min) | Basic Load Rating | Allowable Rotational Speed rpm (Reference) | Relative Dimensions | Mass (g) (Reference) | Unit Price | ||||
| Cr (Dynamic) kN | Cor (Static) kN | Ds | dh (max) | R (max) | |||||||||
| (min) | (max) | ||||||||||||
| HHB6900ZZ | 10 | 22 | 6 | 0.3 | 2.29 | 1.01 | 34000 | 12 | 12.5 | 20 | 0.3 | 10 | |
| HHB6000ZZ | 26 | 8 | 3.90 | 1.57 | 31000 | 13 | 24 | 19 | |||||
| HHB6200ZZ | 30 | 9 | 0.6 | 4.35 | 1.91 | 24000 | 14 | 16 | 26 | 0.6 | 32 | ||
| HHB6901ZZ | 12 | 24 | 6 | 0.3 | 2.45 | 1.16 | 31000 | 14.5 | 22 | 0.3 | 11 | ||
| HHB6001ZZ | 28 | 8 | 4.35 | 1.89 | 27000 | 15.5 | 26 | 22 | |||||
| HHB6201ZZ | 32 | 10 | 0.6 | 5.80 | 2.44 | 22000 | 16 | 17 | 28 | 0.6 | 37 | ||
| HHB6902ZZ | 15 | 28 | 7 | 0.3 | 3.70 | 1.80 | 26000 | 17 | 26 | 0.3 | 17 | ||
| HHB6002ZZ | 32 | 9 | 4.75 | 2.26 | 23000 | 19 | 30 | 30 | |||||
| HHB6202ZZ | 35 | 11 | 0.6 | 6.50 | 3.00 | 20000 | 19 | 20.5 | 31 | 0.6 | 45 | ||
| HHB6903ZZ | 17 | 30 | 7 | 0.3 | 3.90 | 2.04 | 23000 | 19.5 | 28 | 0.3 | 18 | ||
| HHB6003ZZ | 35 | 10 | 5.10 | 2.60 | 21000 | 21.5 | 33 | 39 | |||||
| HHB6203ZZ | 40 | 12 | 0.6 | 8.15 | 3.84 | 17000 | 21 | 23.5 | 36 | 0.6 | 65 | ||
| HHB6904ZZ | 20 | 37 | 9 | 0.3 | 5.40 | 2.96 | 19000 | 22 | 24 | 35 | 0.3 | 36 | |
| HHB6004ZZ | 42 | 12 | 0.6 | 7.95 | 4.00 | 17000 | 24 | 25.5 | 38 | 0.6 | 69 | ||
| HHB6204ZZ | 47 | 14 | 1.0 | 10.90 | 5.28 | 15000 | 25 | 26.5 | 42 | 1.0 | 106 | ||
More Information
| All-Purpose Grease Filled | Heat-Resistant Grease Filled | ||
| B6□□□ZZ SB6□□□ZZ | HHB6□□ZZ HHB6□□□ZZ | ||
| Grease Performance | Thickener | Lithium Soap | Diurea |
| Base Oil | Mineral Oil | Mineral Oil | |
| Base Oil Dynamic Viscosity (40°C,mm2/s) | 26 | 88 | |
| Worked Penetration | 270 | 260 | |
| Dropping Point (°C) | 170~190 | 253 | |
| Evaporation (wt%) | 0.32 (99°Cx22h) | 0.3 (99°Cx22h) | |
| Separation (100°Cx24h,wt%) | 2.9 | 1.5 | |
| Operating Temperature (°C) | In Air | -25~+120 | -20~+160 |
| In Vacuum | Unsuitable | Unsuitable | |
Basic information
| Bearing Ring Shape | Ball | Materials of Inner and Outer Ring | EN 1.4125 Equiv. | Shield material and shape | Double Shielded |
|---|---|---|---|---|---|
| Outer Ring Type | Flat | Accuracy (JIS) | Class 0 | Specifications/Environment | Standard / Heat Resistance |
| Load Direction | Radial | Number of Bearing Ring Rows | Single Track | Size Standard | Metric Series |
| Rolling Element Material | EN 1.4125 Equiv. | Seal Part Structure | Double Shielded |
This page is Deep groove ball bearings / single row / ZZ / heat resistant, max. 160°C / MISUMI, part number HHB625ZZ.
You can find the detail information about specifications and dimensions on part number HHB625ZZ.
Configure
Basic Attributes
-
Type
- HHB6000ZZ
- HHB6001ZZ
- HHB6002ZZ
- HHB6003ZZ
- HHB6004ZZ
- HHB605ZZ
- HHB606ZZ
- HHB608ZZ
- HHB6200ZZ
- HHB6201ZZ
- HHB6202ZZ
- HHB6203ZZ
- HHB6204ZZ
- HHB625ZZ
- HHB626ZZ
- HHB628ZZ
- HHB6900ZZ
- HHB6901ZZ
- HHB6902ZZ
- HHB6903ZZ
- HHB6904ZZ
- HHB695ZZ
- HHB696ZZ
- HHB698ZZ
-
I.D. d(φ)
-
O.D. D(φ)
-
Width B (or T)(mm)
-
Basic Load Rating Cr (Dynamic)(N)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| HHB6003ZZ |
| HHB6004ZZ |
| HHB605ZZ |
| HHB626ZZ |
| HHB628ZZ |
| HHB6900ZZ |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | I.D. d (φ) | O.D. D (φ) | Width B (or T) (mm) | Basic Load Rating Cr (Dynamic) (N) | Allowable Rotational Speed (1/min) | Basic Load Rating Cor (Static) (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|
19.15 € | 1 | 5 Days | 10 | 17 | 35 | 10 | 5100 | 21000 | 2600 | ||
22.37 € | 1 | 5 Days | 10 | 20 | 42 | 12 | 7950 | 17000 | 4000 | ||
7.06 € | 1 | 5 Days | 10 | 5 | 14 | 5 | 1130 | 40000 | 406 | ||
8.37 € | 1 | 5 Days | 10 | 6 | 19 | 6 | 1986 | 32000 | 717 | ||
11.24 € | 1 | 5 Days | 10 | 8 | 24 | 8 | 2833 | 28000 | 1138 | ||
10.77 € | 1 | 5 Days | 10 | 10 | 22 | 6 | 2290 | 34000 | 1010 |
Complementary Products
-
Cantilever Shafts / shouldered / external thread, ring groove / spanner flat
MISUMI Shipping Days: 3 Days
-
Bearing lock nuts / Square design / Regular thread
MISUMI Standard Price : 4.79 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.