Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tol. | Type | D Tol. | Type | D Tol. | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | DA (m6) DPA (p6) | JP | DC (m6) DPC (p6) | FP | DC (m6) DPC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | BJP | BJP | BFP | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | Plating Hardness: 750HV ~ | HJP | HJP | HFP | ||||
EN 1.4037 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | - | P | - | L | - | B | ||||
Type | D Tol. | D | ||||||||
JP | DA | 8 | - | 12 | ||||||
SJP | DPC | 10 | - | 14.01 | ||||||
CFP | DC | 12 | - | P15.97 | - | L12 | - | B3.5 |
P | h6 |
1.50~3.00 | 0 -0.006 |
3.01~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | ℓ | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DA (m6) DPA (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 2 | 0 | 0.1 |
2 | 3 | 4 | 0.5 | ||||||
3 | 5 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6, 8 | ||||||
5 | 8 | 8 | 4 | ||||||
6 | 8, 10 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 12 | 12 | 6 | 2 | 1.5 | ||
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 16 | 20 | 20 | ||||
13 | 18 | 22 | 22 | ||||||
16 | 25 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | ℓ | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 2 | 0 | 0.1 |
2 | 2.50~4.00 | 4 | 0.5 | ||||||
3 | 3.50~6.00 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | ||||||
5 | 5.50~8.00 | 8 | 4 | ||||||
6 | 6.50~10.00 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 12 | 6 | 2 | 1.5 | ||
10 | 11.00~15.00 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 20 | 20 | ||||
13 | 14.00~18.00 | 22 | 22 | ||||||
16 | 17.00~25.00 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ℓ | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
FP GFP BFP SFP HFP CFP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0 | 0.1 |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | ||||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 2 | 1.5 | ||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
JPDA6-10 |
JPDA6-10 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Surface Treatment | Heat Treatment | Material | [P] Diameter (Head) (mm) | [D] Diameter (Pin) (mm) | Mounting Side Outer Dia. Tolerance | [L] Length (Pin) (mm) | [B] Length (Head) (mm) | Dimension Configurable Type | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6.49 € | 1 | Available |
Same day
Stock | 10 | Not Provided | Directly Quenched | [Steel] EN 1.2510 Equiv. | 10 | 6 | m6 | 10 | 5 | P Dimension Fixed | |
- | 1 | 6 Days | 10 | Not Provided | Directly Quenched | [Steel] EN 1.2510 Equiv. | 10 | 6 | m6 | 10 | 5 | P Dimension Fixed |
Loading...
Basic Shape | Large Head | Head Shape | Round | Tip Shape | Flat |
---|---|---|---|---|---|
Inlet Style | No | Mounting Side Shape | Straight(Press Fit) | Positioning Side O.D. Tolerance | h6 |
Configure
Stock
Basic Attributes
Type
Surface Treatment
Heat Treatment
Material
[P] Diameter (Head)(mm)
[D] Diameter (Pin)(mm)
Mounting Side Outer Dia. Tolerance
[L] Length (Pin)(mm)
[B] Length (Head)(mm)
Dimension Configurable Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes