• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Centring pins / round / chamfered flat head / mounting variant selectable

Centring pins / round / chamfered flat head / mounting variant selectable

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Unit еxample related to this product
Workpiece clamp fixture
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Straight/D Tolerance,Tapped:Related Image
 
Material No.MaterialSurface TreatmentHardnessType
Press FitTapped
EN 1.2510 Equiv.-Treated Hardness: 60 ~ 63HRCLPSTALPSTTA
EN 1.2510 Equiv.Hard Chrome PlatingTreated Hardness: 50 ~ 55HRC
Plating Hardness: 750HV ~		GLPSTAGLPSTTA
EN 1.2510 Equiv.--BLPSTA-
EN 1.4301 Equiv.--SLPSTASLPSTTA
EN 1.4301 Equiv.Hard Chrome PlatingPlating Hardness: 750HV ~HLPSTAHLPSTTA
EN 1.4037 Equiv.-Treated Hardness: 50 ~ 55HRCCLPSTA-
EN 1.4037 Equiv. has an identification groove at any position on D part.
It may not come with the center hole depending on the combination of each dimension.
 

Specifications

Part Number-L-E-A
   
Type D Tol. D
LPSTA M 6-L14.0-E2.5-A30
GLPSTTA G 8-L29.3-E8.3-A15
■Tolerance Selection
DStandard Grade
MPGH
m6p6g6h7
1~3+0.008
+0.002		+0.012
+0.006		-0.002
-0.008		0
-0.010
4~6+0.012
+0.004		+0.020
+0.012		-0.004
-0.012		0
-0.012
8, 10+0.015
+0.006		+0.024
+0.015		-0.005
-0.014		0
-0.015
D-2EtanA≥0.73 (Tip Diameter Ø0.73 or more)
Reference: tan15°≈0.267 tan30°≈0.577 tan45°≈1 tan60°≈1.732

■Press Fit
Part NumberL
0.1mm Increment		E
0.1mm Increment		A SelectionCUnit Price
TypeD Tol.DEN 1.2510 Equiv. Hardened
LPSTA		Hard EN 1.2510 Equiv.
GLPSTA		EN 1.2510 Equiv.
BLPSTA		EN 1.4301 Equiv.
SLPSTA		Hard EN 1.4301 Equiv.
HLPSTA		EN 1.4037 Equiv.
CLPSTA
LPSTA
GLPSTA
BLPSTA
SLPSTA
HLPSTA
CLPSTA		M (m6)
P (p6)
G (g6)
H (h7)		13.0~10.00.5~10.015
30
45
60		0.1      
23.0~20.00.5      
3      
41      
55.0~30.0      
6      
85.0~40.01.5      
102      

■Tapped
Part NumberL
0.1mm Increment		E
0.1mm Increment		A SelectionM
(Coarse)		* Tightening Torque
N•cm		ℓUnit Price
TypeD Tol.DEN 1.2510 Equiv. Hardened
LPSTTA		Hard EN 1.2510 Equiv.
GLPSTTA		EN 1.4301 Equiv.
SLPSTTA		Hard EN 1.4301 Equiv.
HLPSTTA
LPSTTA
GLPSTTA
SLPSTTA
HLPSTTA		M (m6)
P (p6)
G (g6)
H (h7)		510.0~30.00.5~10.015
30
45
60		M2-3    
6M3985    
815.0~40.0M54618    
10    
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P. 2297.) Not applicable when using locking materials or lock washers.

Alterations

Straight/D Tolerance,Tapped:Related Image

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
BLPSTAG1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
BLPSTAG2-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAG3-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAG4-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAG5-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAG6-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAG8-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAG10-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAH1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
BLPSTAH2-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAH3-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAH4-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAH5-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAH6-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAH8-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAH10-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAM1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
BLPSTAM2-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAM3-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAM4-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAM5-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAM6-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAM8-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAM10-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAP1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
BLPSTAP2-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAP3-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAP4-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAP5-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAP6-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAP8-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTAP10-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAG5-L[10-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
BLPSTTAG6-L[10-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAG8-L[15-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAG10-L[15-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAH5-L[10-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
BLPSTTAH6-L[10-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAH8-L[15-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAH10-L[15-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAM5-L[10-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
BLPSTTAM6-L[10-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAM8-L[15-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAM10-L[15-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAP5-L[10-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
BLPSTTAP6-L[10-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAP8-L[15-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
BLPSTTAP10-L[15-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAG1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CLPSTAG2-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAG3-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAG4-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAG5-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAG6-L[5-30/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAG8-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAG10-L[5-40/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAH1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CLPSTAH2-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAH3-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
CLPSTAH4-L[3-20/0.1]-E[0-10/0.1]-A[15,​30,​45,​60]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMounting Side Shape Surface Treatment Heat Treatment Material [P] Diameter (Head)
(mm) 		Positioning Side O.D. Tolerance [D] Diameter (Pin)
(mm) 		Mounting Side Outer Dia. Tolerance [L] Length (Pin)
(mm) 		[E] Length (Taper)
(mm) 		A
(°)

-

1 7 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.1g61g63 ～ 100.5 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.2g62g63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.3g63g63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.4g64g63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.5g65g65 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.6g66g65 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.8g68g65 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.10g610g65 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.1h71h73 ～ 100.5 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.2h72h73 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.3h73h73 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.4h74h73 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.5h75h75 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.6h76h75 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.8h78h75 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.10h710h75 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.1m61m63 ～ 100.5 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.2m62m63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.3m63m63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.4m64m63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.5m65m65 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.6m66m65 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.8m68m65 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.10m610m65 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.1p61p63 ～ 100.5 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.2p62p63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.3p63p63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.4p64p63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.5p65p65 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.6p66p65 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.8p68p65 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedNo[Steel] EN 1.2510 Equiv.10p610p65 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Female Thread-No[Steel] EN 1.2510 Equiv.5g65g610 ～ 300.5 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.6g66g610 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.8g68g615 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.10g610g615 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Female Thread-No[Steel] EN 1.2510 Equiv.5h75h710 ～ 300.5 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.6h76h710 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.8h78h715 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.10h710h715 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Female Thread-No[Steel] EN 1.2510 Equiv.5m65m610 ～ 300.5 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.6m66m610 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.8m68m615 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.10m610m615 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Female Thread-No[Steel] EN 1.2510 Equiv.5p65p610 ～ 300.5 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.6p66p610 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.8p68p615 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Female ThreadNot ProvidedNo[Steel] EN 1.2510 Equiv.10p610p615 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv1g61g63 ～ 100.5 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv2g62g63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv3g63g63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv4g64g63 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv5g65g65 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv6g66g65 ～ 300 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv8g68g65 ～ 400 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv10g610g65 ～ 400 ～ 1015 ～ 60

-

1 7 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv1h71h73 ～ 100.5 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv2h72h73 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv3h73h73 ～ 200 ～ 1015 ～ 60

-

1 6 Days 10Straight(Press Fit)Not ProvidedDirectly Quenched[Stainless Steel] EN 1.4037 Equiv4h74h73 ～ 200 ～ 1015 ～ 60

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Basic Shape Straight/With Air Vent Head Shape Round Tip Shape Tapered
Inlet Style No

Configure

Clear all

283Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Mounting Side Shape

    • Straight(Press Fit)
    • Female Thread

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating
      • Hard Chrome Plating

    Clear

  • Heat Treatment

    • No
    • Directly Quenched

    Clear

  • Material

    • Steel
      • EN 1.2510 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv
      • EN 1.4301 Equiv.

    Clear

  • [P] Diameter (Head)(mm)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Positioning Side O.D. Tolerance

    • p6
    • m6
    • h7
    • g6

    Clear

  • [D] Diameter (Pin)(mm)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Mounting Side Outer Dia. Tolerance

    • p6
    • m6
    • h7
    • g6

    Clear

  • [L] Length (Pin)(mm)

     [3-40/0.1mm Unit(s)]

    Clear

  • [E] Length (Taper)(mm)

     [0-10/0.1mm Unit(s)]

    Clear

  • A(°)

    • 15
    • 30
    • 45
    • 60

    Clear

  • Type

    • BLPSTA□
    • BLPSTTA□
    • CLPSTA□
    • CLPSTTA□
    • GLPSTA□
    • GLPSTTA□
    • HLPSTA□
    • HLPSTTA□
    • LPSTA□
    • LPSTTA□
    • SLPSTA□
    • SLPSTTA□

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 6 Days or Less
    • 7 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.