GANTER Clamp Units (for Manual Tightening)

?* Information on days to ship and prices

• 

  Flanged connector clamps / Aluminium / GN 146.3 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bores of GN 146.3 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  GN 146.3 flanged connector clamps are also suitable for mounting on profile systems.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Flanged connector clamps, Steel

  GANTER

  The clamping bores of GN 146 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.32 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flanged connector clamps / Aluminium / GN 147 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bores of GN 147 flanged connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square designs are also suitable for use in profile systems.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	35.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Base plate connector clamps / Aluminum / GN 162.3 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 162.3 base plate connector clamps is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  Base plate connector clamps GN 162.3 are also suitable for mounting on profile systems.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	19.10 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Base plate connector clamps / Aluminum / GN 163 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bores of GN 163 base plate connector clamps are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Flanged connector clamps / Aluminium / GN 145 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bores of GN 145 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  GN 145 flanged connector clamps are also suitable for mounting on profile systems.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	19.96 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping plates for position indicators / GN 954.6 / B8, B10, B12, B14

  GANTER

  Clamping plates GN 954.6 are used in connection with position indicators GN 954 / GN 9054.
  In a simpler way and without large construction and installation effort these spindles can, after adjustment, be clamped and locked.
  At the same time these plates are fitted with the bore Ø 6,1 to accept the torque limiter for the position indicator.
  The spacer can be installed so that it lies as required either to the right or the left.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	18.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Flanged linear actuator connectors, Stainless Steel

  GANTER

  GN 145.1 Stainless Steel-Linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	131.12 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Base plate connector clamps / GN 162.3 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 162.3 Stainless Steel-Base plate connector clamps is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  Base plate connector clamps GN 162.3 are also suitable for mounting on profile systems.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	46.38 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Flanged connector clamps

  GANTER

  The clamping bores of GN 145 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively
  GN 145 flanged connector clamps are also suitable for mounting on profile systems.
  
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	45.90 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Base plate connector clamps, Aluminium

  GANTER

  The clamping bores of GN 162 base plate clamps are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	18.96 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Base plate connector clamps / Aluminum / GN 165 / 2-with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 165 base plate connector clamps are not machined and specially designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square versions are also suitable for profile systems.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	34.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Base plate linear actuator connectors, Aluminium

  GANTER

  GN 162.1 base plate linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	40.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamping plates for position indicators / GN 953.6 / B14, B15, B16, B20

  GANTER

  Clamping plates GN 953.6 are used in connection with position indicators GN 953 / GN 9053.
  In a simpler way and without large construction and installation effort these spindles can, after adjustment, be clamped and locked.
  At the same time these plates are fitted with the bore Ø 6,1 to accept the torque limiter for the position indicator.
  The spacer can be installed so that it lies as required either to the right or the left.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	20.60 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flanged base plate connector clamps, Aluminium

  GANTER

  The clamping bores of GN 171 flanged base plate connector clamps are not machined and specially designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square versions are also suitable for profile systems.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	46.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Flanged linear actuator connectors, Aluminium

  GANTER

  GN 145.1 linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	40.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hook type toggle clamps for pulling action

  GANTER

  The draw hook of the GN 850 hook type toggle clamps can be adjusted within the stroke.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	28.70 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 147.1 / 2-with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  Linear actuator connectors GN 147.1 are normally supplied mounted only in connection with a square linear actuator and for function control.
  The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play.
  This can be adjusted in one direction using the clamping screws. In the other direction (90° to it), a defined minimum play can be achieved only by appropriate machining (special design) of the square linear actuator connector.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	72.64 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 165.1 / 2-with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 165.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
  The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play.
  This can be adjusted in one direction using the clamping screws. In the other direction (90° to it), a defined minimum play can be achieved only by appropriate machining (special design) of the square linear actuator connector.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	69.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Off-set base plate connector clamps, Aluminium

  GANTER

  The clamping bores of GN 166 off-set base plate connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square versions are also suitable for profile systems.
  
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	34.08 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Split hubs, Sintered Steel

  GANTER

  Split hubs GN 150 are distinguished by the method of simple clamping to any shaft.
  This can be achieved without prior machining of the shaft, eliminating clamping parts and assembly work.
  A further advantage is the positioning of the lever arm to any required position.
  The shaft tolerance should be within h11; to transmit higher torques the hub can be supplied with a keyway.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	15.60 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Base plate connector clamps / GN 162 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bores of GN 162 base plate clamps are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	45.62 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Base plate linear actuator connectors

  GANTER

  GN 162.1 Stainless Steel-Base plate linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	134.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Split hubs

  GANTER

  Stainless Steel-Split hubs GN 150 are distinguished by the method of simple clamping to any shaft.
  This can be achieved without prior machining of the shaft, eliminating clamping parts and assembly work.
  A further advantage is the positioning of the lever arm to any required position.
  The shaft tolerance should be within h11; to transmit higher torques the hub can be supplied with a keyway.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	27.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wide base plate connector clamps, Aluminium

  GANTER

  The clamping bores of GN 167 wide base plate connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square versions are also suitable for profile systems.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	44.84 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Flanged connector clamps, Aluminum (GN 147.3)

  GANTER

  The clamping bores of the flanged connector clamps GN 147.3 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square versions are also suitable for the attachment and/or use with profile systems.The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions)

  • Volume Discount

  Starting from∗ ：	35.72 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...