GANTER Single Post Type

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Swivel Clamp Connector Joints / Aluminium / GN 282 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 282 swivel clamp connector joints are an assembly of of the swivel clamp connectors GN 272 and GN 276.
  For the type with stepless adjustment (Type S) swivel clamp connectors with a centring step are used.
  
  The clamping bore is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	47.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Attachment clamp mountings, Aluminium

  GANTER

  Attachment clamp mountings GN 478 are primarily designed for mounting sensor holders GN 479 and retaining plates GN 479.1. They are fitted with a central thread and, with d1 = B15 bore and higher, an additional bore template 4 x M4.
  The standard clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by an adjustable clamping lever GN 511 (see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	11.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Swivel Clamp Connector Joints / Aluminium / GN 281 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 281 swivel clamp connector joints are an assembly of the swivel clamp connectors GN 271 and GN 275.
  
  The clamping bore is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	41.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Swivel Clamp Connectors / Aluminium, Stainless Steel / GN 277 / 2, with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 277 swivel clamp connectors is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
  
  GN 277 swivel clamp connectors can be assembled with swivel clamp connectors GN 271, GN 273 or GN 275 to create swivel clamp connector joints.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	20.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Tube Connector Joints / Aluminium / GN 242 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 242 tube connector joints are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Swivel Clamp Connectors / Aluminium / GN 278 / 2, with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 278 swivel clamp connectors is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
  
  GN 278 swivel clamp connectors can be assembled with swivel clamp connectors GN 272, GN 274 or GN 276 to create swivel clamp connector joints.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.14 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Attachment clamp mountings

  GANTER

  Attachment clamp mountings GN 484 are primarily designed for mounting sensor holders GN 479 and retaining plates GN 479.1. They are fitted with a central thread and for the size with k = 20 and higher, an additional bore template 4 x M4.
  Using swivel clamp mountings GN 482 and T-Swivel clamp mountings GN 483 with the same k dimensions, attachment clamp mountings GN 484 are easily combined into articulated swivel clamp mounting joints. Clamping kits GN 511.1 with screw, type S and adjustable hand lever, type K are available for this purpose (description see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	14.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamp mountings, Aluminum

  GANTER

  GN 477 clamp mountings have no thread. Fixing or clamping is made via two threads on the attachment side.
  The bore distance m of the clamp mountings GN 477 is matched with the foot clamp mountings GN 473 and the flanged bolts GN 480 as well as retaining magnets GN 51.6.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	8.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Sensor holders, Aluminium

  GANTER

  The clamping bore of GN 273.4 sensor holders is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
  The aluminium design guarantees a highly safe and secure clamping action and safe positioning.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	20.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Swivel clamp connectors

  GANTER

  The clamping bore of GN 279 swivel clamp connectors is not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
  Two GN 279 swivel clamp connectors can be combined to GN 289 swivel clamp connector joints.
  GN 279 swivel clamp connectors can be assembled with swivel clamp connectors GN 272, GN 274 and GN 276 to create swivel clamp connector joints.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	52.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Swivel clamp mountings

  GANTER

  Swivel clamp mountings GN 482 can be combined with T-Swivel clamp mountings GN 483 and attachment clamp mountings GN 484 with the same k dimensions into swivel clamp mounting joints. Clamping kits GN 511.1 with screw (type S) and adjustable hand lever (type K) are available for this combination.
  Also, the clamping screw d4 - which is a cylinder head screw with DIN 912 hexagonal recess in the standard design - can be replaced by a clamping kit GN 511.
  The description for ordering is shown in the dimensional table.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	15.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Base plate clamp mountings, Aluminium

  GANTER

  Base plate clamp mountings GN 473 have a horizontal and a vertical clamping bore. The vertical clamping bore is additionally fitted with a square.
  The bore distance m of the base plate clamp mountings GN 473 is matched with the clamp mountings GN 477 and the flanged bolts GN 480 as well as retaining magnets GN 51.6.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by an adjustable clamping lever GN 511 (see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	17.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Swivel clamp connector bases

  GANTER

  Swivel clamp connector bases GN 485 can be combined with swivel clamp mountings GN 482, T-swivel clamp mountings GN 483 and attachment clamp mountings GN 484 with the same k dimensions into swivel clamp mounting joints. Clamping kits GN 511.1 with screw (type S) and adjustable hand lever (type K) are available to connect the joints and bases (code no. for ordering is shown in the dimensional table).
  The center to center mounting hole distance m of the swivel clamp connector bases GN 485 matches the base plate clamp mountings GN 473, clamp mountings GN 477, flanged bolts GN 480 as well as retaining magnets GN 51.6.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	18.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swivel Clamp Connectors / Aluminium, Stainless Steel / GN 273 / 2, with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 273 swivel clamp connectors is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
  
  GN 273 swivel clamp connectors can be assembled with swivel clamp connectors GN 271, GN 275 or GN 277 to create swivel clamp connector joints.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	20.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Swivel Clamp Connectors / Aluminium / GN 274 / 2, with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 274 swivel clamp connectors is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
  
  GN 274 swivel clamp connectors can be assembled with swivel clamp connectors GN 272, GN 276 or GN 278 to create swivel clamp connector joints.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	22.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Swivel Clamp Connectors / Aluminium, Stainless Steel / GN 275 / 2, with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 275 swivel clamp connectors is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
  
  GN 275 swivel clamp connectors can be assembled with swivel clamp connectors GN 271, GN 273 or GN 277 to create swivel clamp connector joints.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	20.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Swivel Clamp Connectors / Aluminium / GN 276 / 2, with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 276 swivel clamp connectors is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
  
  GN 276 swivel clamp connnectors can be assembled with swivel clamp connectors GN 272, GN 274 or GN 278 to create swivel clamp connector joints.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.18 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Swivel Clamp Linear Actuator Connectors / Aluminum / GN 273.1 / 2, with Stainless Steel-clamping screw DIN 912

  GANTER

  GN 273.1 swivel clamp linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	44.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swivel Clamp Linear Actuator Connectors / Aluminum / GN 274.1 / 2, with Stainless Steel-clamping screw DIN 912

  GANTER

  GN 274.1 swivel clamp linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	46.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-Swivel clamp mountings

  GANTER

  T-Swivel clamp mountings GN 483 can be combined with swivel clamp mountings GN 482 and attachment clamp mountings GN 484 with the same k dimensions into articulated swivel clamp mounting joints. Clamping kits GN 511.1 with screw, type S and adjustable hand lever, type K are available for this purpose (description see table of dimensions).
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	13.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Tube connector joints / Aluminium / split assembly / GN 241

  GANTER

  The clamping bores of GN 241 tube connector joints are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Tube supports, Aluminium

  GANTER

  The clamping bores of GN 231 tube supports are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  Tube supports GN 231 are also suitable for mounting on profile systems.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	17.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...