Air Cylinders（Page 2）

?* Information on days to ship and prices

• 

  Air Cylinder CS2 Series

  SMC

  [Features]
  · Lighter weight makes it possible to reduce device weight
  · Die cast rod cover and head cover used for greater weight reduction
  · Rod diameter has been changed to suit the application, allowing for greater weight reduction
  · Allowable lateral load equal to the CS1 series
  · Function remains equal to the CS1 series even if rod diameter is changed to suit the application
  · Improved operability after installation
  Operability has been improved by placing the piping port and cushion valve operating position on the same side
  · Interchangeable with CS1 series
  Cylinder mounting dimensions and rod-end thread sizes are interchangeable with the CS1 series
  · Maintenance improved by making cushion seals replaceable
  · Compact auto switches can be mounted

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	286.29 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  P Cylinder (Cylinder With Positioner) CPA2 Series

  SMC

  [Features]
  · Cylinder positioning proportional to the input signal (air pressure) is possible.
  · With corrective operation function: Load variation returns the cylinder to initial set position when the position deviates.

  Select to compare

  Configure now
  Starting from∗ ：	28.87 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lateral Load Resisting Cylinder, Low Friction, MQM Series

  SMC

  An air cylinder suitable for all driving ranges, from low pressure, low speed, uniform speed and low friction to high pressure, high speed and high-speed response (high frequency).
  [Features]
  · Covers a range of driving speeds and output controls not possible with standard cylinders thanks to its metal seal structure with minimal sliding resistance.
  · Minimal sliding resistance allows low-pressure actuation at 0.005 MPa.
  · Low- and uniform-speed actuation. Smooth, uniform-speed actuation ranges as low as 0.3 mm/s.
  · Low sliding resistance allows output control in approx. 0.05 N increments. (Based on cylinder piston area × pressure accuracy)
  · No increased sliding resistance after not operating for a long period of time.
  · Long lifespan: Long service life of 10,000 km or 100 million full cycles.
  · Lateral load resistance increased by built-in ball bushing.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	366.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Air Cylinder, Standard Type, Double Acting, Single Rod CA2 Series

  SMC

  An air cylinder with easy air cushion control.
  [Features]
  · Weight reduced by up to 15%.
  · Various switches such as compact auto switches and strong magnetic field resistant switches can be mounted.
  · Part numbers are set for products with rod-end brackets and pivot brackets. (No need to order separately.)
  *See catalog for specification details.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	115.78 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Standard Type, Lube / Non-Lube Type, Air-Hydro Type CS1 Series

  SMC

  Tie-rod type air cylinder.
  [Features]
  · Square cover.
  · Large bore size.
  *See the SMC catalog for specification details.
  *Product pictures are representative images. CAD data is not supported for some model numbers.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	513.10 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Pneumatic Power Cylinder K

  DESTACO

  Destaco’s K Series pneumatic power cylinder is designed with a piston rod with male thread and can provide over 13,000lbf (60kN) of rod force in a simple double acting pneumatics-only package. Operation is based on the wedge lever principle. These double acting cylinders feature two steps of stroke: the forward stroke to move a certain distance and the power stroke with an amplified force on a short (6-7mm) distance. The rod force in the range of the forward stroke is that of a traditional pneumatic cylinder; the rod force in the range of the power stroke features a mechanical advantage of up to 10:1. The pneumatic power cylinder is ideally suited as the power source for tools and devices for the following applications - clamping, punching, stamping, notching, coining, riveting, pressing, and clinching.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,036.82 €
  Min. Shipping Days ：	25 Days

  *Unit price with basic configuration

• 

  Electric actuator, ESBF Series

  FESTO

  [Specifications]
  ・Spindle type: Ball screw, Lead screw
  ・Material of cylinder barrel: Wrought aluminum alloy, Smooth anodized
  ・Corrosion resistance class (CRC): 2 - Moderate corrosion stress
  ・Degree of protection: IP40
  
  [Features]
  ・Use in wet environments with protection to IP65
  ・NSF-H1 lubricant for food and beverage applications
  ・For manufacturing lithium-ion batteries

  Select to compare

  Configure now
  Starting from∗ ：	731.69 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Cylinder with lock double acting single rod / double rod CP96N series

  SMC

  [Features]
  ·Manual lock can be opened and held with only a hexagon wrench, making it easy to attach to the device
  ·The lock unit and cylinder can be separated, improving maintainability
  ・ 15% improvement in holding force
  ・ High stop accuracy ±1 mm or less
  ·Overall length reduced by up to 27.5 mm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	562.68 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Compact Cylinder, Large Bore Size, Double Acting, Single Rod, CQ2 Series

  SMC

  A space-saving cylinder designed with a short overall length. Helps to make jigs and equipment more compact.
  [Features]
  · Remodeled with a new body for more flexibility. Small auto switches can be mounted on the 4 surfaces.
  · Auto switches can be mounted at any position on the 4 surfaces to best match the installation conditions. (ø12 to ø25: 2 surfaces)
  · Improved design flexibility.
  · The auto switch rail has been removed. A round groove for mounting small auto switches has been provided on the 4 surfaces. · Supports up to ø200.
  · No projection of auto switches.
  · Tube inner diameter: 125 to 200 mm.
  · Action: double acting, single rod.
  · Lightweight: Reduced by 5 to 13% (compared to conventional CQ2 Series)
  · Compact large bore size.
  · With auto switch.

  Select to compare

  Configure now
  Starting from∗ ：	229.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Compact Guide Cylinder With Air Cushion MGP Series

  SMC

  A space saving compact cylinder with guide.
  [Features]
  · The shortening of the guide rod and change to the thickness of the plate has reduced the product weight by up to 24%.
  · By reducing the guide rod length by as much as 22 mm, the amount of machining work required to create clearance between the bottom of the cylinder body and the equipment has been reduced.
  · Small auto switches and auto switches resistant to strong magnetic fields can be directly mounted on 2 sides.
  · 4 types of mounting are possible. Piping is possible from 2 directions.
  · With air cushion.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	256.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CM2K Series

  SMC

  An air cylinder manufactured by SMC
  [Features]
  Female rod end available as standard
  · Rod-end type can be selected to fit the application
  · Easy fine adjustment of auto switch position
  · Transparent switch bracket improves visibility of indicator LED
  · Single clevis and trunnion pivot brackets are available
  · Type with a hexagonal rod that prevents rotation
  · High non-rotating accuracy: ø20, ø25: ±0.7° ø32, ø40: ±0.5°
  · Can operate without lubrication
  · Same installation dimensions as the standard cylinder
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	72.85 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  3-Position Cylinder RZQ Series

  SMC

  Equipped with an intermediate stop function.
  [Features]
  · 2-stage stroke possible by slight extension of dimensions.
  · Possible to specify the first stroke without changing the total length dimension.
  · Repeated intermediate stop and positioning accuracy of ±0.02 mm or lower.
  · Stroke can be freely specified.
  · Wide variety of mounting methods.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	237.52 €
  Min. Shipping Days ：	16 Days

  *Unit price with basic configuration

• 

  Linear actuator, DGPL Series

  FESTO

  Select to compare

  Configure now
  Starting from∗ ：	2,107.92 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Air cylinder standard type double acting single rod C75 series

  SMC

  A standard type double acting single rod air cylinder.
  [Features]
  ·Set the part number with mounting support bracket, rod tip bracket, and auto switch
  ·Contributes to man-hour reduction by saving the trouble of arranging cylinders and metal fittings separately
  ・ Easy fine adjustment of auto switch position
  ・ Improved visibility of indicator lamp by making switch bracket transparent

  Select to compare

  Configure now
  Starting from∗ ：	63.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cylinder with Multifunction Guide STG Series

  CKD

  [Features]
  · More lightweight, resource saving, lateral load resistant and stable operating guided cylinder than conventional models

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  Super-Mount Cylinder SMG Series

  CKD

  Easier to use due to the additional variations.
  
  [Features]
  · Space saving and light weight due to the integrated mount block.
  · Installation can be done directly from 5 sides freely since a mount block is integrated.
  · Even with the detection switch, there is almost no protruding space.
  · Easier maintenance with the new mounting method adopted.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Air Cylinder, Standard Type, Double Acting, Single Rod CM2 Series

  SMC

  Air cylinder with female rod end available as standard.
  [Features]
  · Rod-end types can be selected to suit the application.
  · Various mounting bracket options.
  · Easy fine adjustment of auto switch position.
  · Transparent switch bracket improves visibility of indicator LED.
  · Single clevis and trunnion pivot brackets are available.
  · Total length is shortened with boss-cut type.
  · Water-resistant compact auto switch mountable.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	56.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  MQQ, Compact Cylinder, Metal Seal, Low Friction

  SMC

  A compact low-friction cylinder suitable for low pressures, low speeds, uniform speeds and low friction actuation.
  [Features]
  · Covers a range of actuation speeds and output controls thanks to its metal seal structure with minimal sliding resistance.
  · Its minimal sliding resistance allows for low-pressure actuation at 0.005 MPa.
  · Smooth and uniform-speed actuation ranges as low as 0.3 mm/s.
  · Long lifespan: Long service life of 10,000 km or 100 million full cycles.
  · Lateral load resistance: Features built-in ball bushings in the bearings for improved lateral load resistance. (MQQL)
  · Its low sliding resistance allows output control in approximately 0.05‑N increments. (Based on cylinder piston area × pressure accuracy)
  · No change to sliding resistance, even after extended periods of non-use.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	227.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Square-Tube-Type Air Cylinder, Standard Type, Double Acting, Single Rod MB1 Series

  SMC

  A square tube type air cylinder that enables mounting of small auto switches on 4 surfaces.
  [Features]
  · Fastener on auto switch mounting groove to prevent contaminant from accumulating (option).
  · Part numbers are set for products with rod-end brackets and pivot brackets.
  *Rod-end bracket and pivot bracket are shipped together with the product.
  · Not necessary to order a bracket for the applicable cylinder separately.
  · Various mounting bracket options.
  · Suitable mounting brackets can be selected for the installation conditions.
  · Improved mounting freedom.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	144.85 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  HYG Series Hygienic Design Cylinder

  SMC

  HYG Series Hygienic Design Cylinder with an easy-to-clean format.
  [Features]
  · Air cylinder with improved water resistance.
  · To keep the product flat, grooves for auto switches and holes for cushion needles, etc. have been eliminated.
  · Approximately 5 times increase in lifespan (compared to manufacturer's current models).
  · Able to handle food grease (NSF-H1 certified).
  · NBR or FKM can be selected as the external sealant material.
  · Mounting part: ISO standard (VDMA) compliant (HYC).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	401.65 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  ISO Standard (15552) Compliant Air Cylinder, Standard Type, Double Acting, Single Rod, Double Rod C96 Series

  SMC

  [Features]
  ·ISO standard (15552) compliant
  ·Lightweight: Up to 17% reduction
  ·New cushion method (air cushion + damper cushion) shortens tact time
  ·Damper cushion reduces metal noise when the piston is stopped

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	88.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lintra Plus Rodless Cylinder

  NORGREN

  Select to compare

  Configure now
  Starting from∗ ：	390.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  MTS, Precision Cylinder (Bores 12-40)

  SMC

  A precision cylinder with an internal guide function that can be mounted with high accuracy.
  [Features]
  · Deflection: 0.1 mm or less (within the allowable lateral load value of MTS12-25).
  · Requires less mounting space. Reduced labor for design and assembly.
  · Auto switches can be mounted on 4 surfaces (bore size 8 mm: 2 surfaces).
  · 3 types of mounting are possible. Tapped mounting (bottom mounting, front mounting), Through-hole mounting (both sides mounting).
  · 2 types of rod end configuration (Standard: rod end female thread, Option: rod end male thread, using stud bolt).
  · Air cushion available as standard (bore size 8 mm: rubber bumper).
  · Head side end lock type added to series (bore size 12 to 40 mm).
  · The specially configured rod seal design delivers sealing and durability equivalent to conventional round rod models.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	286.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  CXSJ, Dual Rod Cylinder, Compact Type

  SMC

  Dual-Rod Cylinder, Compact Type CXSJ Series that can be mounted from 3 directions.
  [Features]
  · Dual-rod cylinder with guide function that is suitable for pick and place applications, etc.
  · Ball bushing bearings and slide bearings are standard for all series.
  · Workpieces can be mounted on 3 surfaces.
  · Twice the thrust, non-rotating accuracy of ±0.1°.
  · Adjustable stroke range of 0 to -5 mm.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	110.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Free Mount Cylinder, Long Stroke, CU Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pneumatic compact cylinders UNITOP

  UNIVER

  bore available from 16mm to 32mm, stroke from 5mm to 80mm, magnetic version standard supplied

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	51.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ISO Standard Compliant Air Cylinder, Standard Type, Double Acting, With Cushion CP96 Series ø125

  SMC

  [Features]
  ·ISO standard (15552) compliant
  ·Easy adjustment of cushion valve
  ·Grooves for CNOMO, D-M9□, A9□ are arranged on 4 sides

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	383.79 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Compact air cylinder, ADVUL Series

  FESTO

  [Specifications]
  ・Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
  ・Corrosion resistance class (CRC): 2 - Moderate corrosion stress
  ・Cylinder Operation Method: Double Acting
  
  [Features]
  ・Piston rod secured against rotation by a guide rod and yoke plate
  ・Plain bearing
  ・Optionally with through piston rod

  Select to compare

  Configure now
  Starting from∗ ：	177.09 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Standard Guided Cylinder, Made to Order, MGP Series

  SMC

  · Get a precise guide movement: ±0.03° of rotating accuracy
  · Design compact and lightweight machines: Reduced weight and required space due to guide rod and plate construction
  · Adapt it easily to your application: Wide range of product variation available

  Select to compare

  Configure now
  Starting from∗ ：	353.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ISO Air Cylinder, Single Acting, Single Rod, C85-S / T Series

  SMC

  · Single acting, single rod, spring return/spring extend
  · Conforms to ISO standard 6432
  · Bore sizes (mm): 8, 10, 12, 16, 20, 25
  · Standard strokes up to 150mm
  · Auto switch capable

  Select to compare

  Configure now
  Starting from∗ ：	32.61 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  General cylinder tight cylinder CMK2 Series

  CKD

  Medium grooves in general cylinder, high corrosive resistance and long operating life. Caulking type cylinder.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	13 Days

• 

  Compact Cylinder, Long Stroke Type, Double Acting, Single Rod, CQ2 Series

  SMC

  A space-saving cylinder designed with a short overall length. Helps to make jigs and equipment more compact.
  [Features]
  · Remodeled with a new body for more flexibility. Small auto switches can be mounted on the 4 surfaces.
  · Auto switches can be mounted at any position on the 4 surfaces to best match the installation conditions. (ø12 to ø25: 2 surfaces)
  · Improved design flexibility.
  · The auto switch rail has been removed. A round groove for mounting small auto switches has been provided on the 4 surfaces. · Supports up to ø200.
  · No projection of auto switches.
  · With auto switch.

  Select to compare

  Configure now
  Starting from∗ ：	74.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Pin Cylinder, Single Acting, Spring Return CJP Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A short-stroke miniature cylinder with a short full length.
  · · One-touch fitting can be connected.
  · Small and light.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Air Cylinder, Double Acting, Single Rod (JCM / JCDM Series)

  SMC

  An air cylinder with a wide variety of cover types available.
  [Features]
  · There are no parts near the indicator LED, so visibility is improved.
  · To mount the auto switch, simply insert it and position it correctly.
  · Overall length shortened by up to 97 mm.
  · Selectable port sizes: M5, Rc, NPT1/8.
  · Male and female rod ends are available.
  · With auto switch (JCDM).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.73 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  ISO (15552) Standard Compliant Air Cylinder, Non-Rotating Rod Type, Double Acting, Single / Double Rod, CP96K Series

  SMC

  [Features]
  ·ISO standard (15552) compliant
  ·New cushion method (air cushion + damper cushion) shortens tact time
  ·Damper cushion reduces metal noise when the piston is stopped

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	124.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Electric actuator, EPCO Series

  FESTO

  Select to compare

  Configure now
  Starting from∗ ：	1,381.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hinge cylinder, DWA Series

  FESTO

  Select to compare

  Configure now
  Starting from∗ ：	149.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Air Drive Unit, Indicator/Linear Gauge

  MITUTOYO

  - Provides smooth lifting and lowering of the contact point of a gauge by pneumatic cylinder.
  - The speed of lift can be regulated by the throttle on the remote cylinder.

  Select to compare

  Configure now
  Starting from∗ ：	189.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Air Cylinders / Panel Mount / Single Acting

  MISUMI

  [Features] This is a very compact air cylinder. It can be mounted on a plate.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.15 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Air Cylinder Standard Type, Single Acting, Spring Return / Extend CG1 Series

  SMC

  Standard cylinder with improved auto switch operability.
  [Features]
  · Rod action type: single rod.
  · Female rod end available as standard.
  · Improved auto switch operability and easy position adjustment.
  · No trunnion mounting female thread for basic type variation.
  · Part numbers are set for products with rod-end brackets and pivot brackets (no need to order separately).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.23 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  CX2, Slide Unit, Slide Bearing

  SMC

  Ensures high positional accuracy. Slide Unit, Double-Rod Type, Slide Bearing CX2 Series.
  [Features]
  · Provided with shock absorbers to absorb impact and noise.
  · Auto switches can be installed.
  · Smooth operation and high thrust.
  · Mountable on the housing or on the plate.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.34 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CJ2K Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · Double foot, head flange and double-side bossed have been added to the mounting types.
  · Improved freedom in mounting.
  · Head cover with boss is also available.
  · Easy fine adjustment of auto switch position.
  · Transparent switch bracket improves visibility of indicator LED.
  · A head cover port location that is perpendicular to the axis has been added to ø6.
  · Part numbers are set for products with rod-end brackets and pivot brackets.
  · A cylinder with a hexagonal rod that prevents rotation
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.15 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  C(D)UK, Free Mount Cylinder, Non-rotating, Single Acting

  SMC

  Free mount series of compact air cylinders.
  [Features]
  · Non-rotating rod type.
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  · With auto switch.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  M(D)U Plate Cylinder, Double Acting, Single Rod w / Auto Switch Mounting Groove

  SMC

  Plate Cylinder, Double Acting, Single Rod MU Series that allows small auto switches to be mounted in 4 directions.
  [Features]
  · Auto switches can be mounted easily.
  · Can be mounted without brackets and in flexible ways.
  · Can be mounted with a short pitch.
  · Various brackets are available to accommodate a wide range of applications.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	68.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Smooth Cylinder CQ2Y Series

  SMC

  CQ2Y Series Smooth Cylinder that allows stable operation even at a low speed of 5 mm/s.
  [Features]
  · Ensures low friction, even during bi-directional operation.
  · Can be operated regardless of the direction of pressure.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	58.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...