Screw-Hole-Related Tools（work material：Medium carbon steel (carbon content 0.25 to 0.45%) Page 4）

?* Information on days to ship and prices

• 

  Short Point Tap for Deep Holes S-PO

  YAMAWA MFG

  A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Short thread length gives low frictional resistance.
  · Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.65 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Spiral Tap For Soft Steel / Esper E-SP

  YAMAWA MFG

  A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.18 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  For Tapered Screw for Pipe for Viscous Material (Long Screw Type Interflap: Left Twisted Spiral) INT-PT

  YAMAWA MFG

  [Features]
  · Tap that reduces cutting torque by removing 1 thread per land with loose leftward twist.
  · It is a tap particularly suitable for thread processing of viscous materials such as stainless steel and chrome molybdenum steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	136.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread Metric Screw (ISO)

  CARMEX

  Enables internal threading to be performed in a single pass.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.
  

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread G (55°)

  CARMEX

  Threading can be performed for both internal and external threads with a single pass.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread Unified Screw (UN)

  CARMEX

  For internal threading.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread BSPT

  CARMEX

  For both internal and external threading.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread NPT

  CARMEX

  For both inner/outer diameter threads.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread NPTF

  CARMEX

  For both inner/outer diameter threads.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole ISO

  CARMEX

  Metric thread / for I.D.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mill Thread G (55°) Solid Carbide with Oil Hole

  CARMEX

  Whitworth screw, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole BSPT

  CARMEX

  BSPT thread, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole UN

  CARMEX

  For unified screws and inner diameter screws.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPT

  CARMEX

  NPT thread, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPS

  CARMEX

  Internal and external use inch shank.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPSF

  CARMEX

  Inch shank for both inner and outer diameters.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole PG

  CARMEX

  For both internal and external diameters.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	390.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole ISO

  CARMEX

  For metric I.D. thread.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	263.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole BSPT

  CARMEX

  For both internal and external threading.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	305.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole BSW

  CARMEX

  For both internal and external threading.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	263.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

  CARMEX

  For internally threaded metric screws.
  
  [Features]
  · For thread cutting deep, large diameter holes.
  · With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
  · Stable processing without causing chatter is possible.
  · Deep hole drilling can be performed with one pass.
  · Blade length is shorter, so cutting resistance decreases.
  · Able to thread long blade lengths of up to 3D

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

  CARMEX

  For internally threaded unified screws.
  
  [Features]
  · For thread cutting deep, large diameter holes.
  · With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
  · Stable processing without causing chatter is possible.
  · Deep hole drilling can be performed with one pass.
  · Blade length is shorter, so cutting resistance decreases.
  · Able to thread long blade lengths of up to 3D

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid for Outer Diameter, Mill Thread ISO

  CARMEX

  Metric thread / for O.D. thread.
  
  [Features]
  · The spiral blade enables a clean finish.
  · Machining time is reduced by using three to six flutes

  Select to compare

  Configure now
  Starting from∗ ：	342.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid for Outer Diameter, Mill Thread UN

  CARMEX

  For unified screws and outer diameter screws.
  
  [Features]
  · The spiral blade enables a clean finish.
  · Machining time is reduced by using three to six flutes

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Tapered End Mill

  CARMEX

  [Features]
  · Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
  · Increases the service life of solid carbide type mill threads or mill thread tips.
  · Equal and proper load will be applied to the cutting edge of the mill thread cutter.
  · By applying taper shape pre-processing, the machining time of the mill thread is shortened

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	119.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini Mill Thread G55°

  CARMEX

  For both G (55°) inner and outer diameter thread (MT7).
  
  [Features]
  · Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
  · Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
  · Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
  · Because high-speed cutting can be performed, machining time is shortened.
  · The blade length is short (3 ridges), so cutting load is not applied.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · Enables thread cutting of difficult-to-cut and high hardness materials.

  Select to compare

  Configure now
  Starting from∗ ：	211.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Jet Mini Mill Thread for Aircraft UNJ

  CARMEX

  It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

  Select to compare

  Configure now
  Starting from∗ ：	213.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Jet Mini Mill Thread for Aircraft MJ

  CARMEX

  It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

  Select to compare

  Configure now
  Starting from∗ ：	217.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread, No Finishing Flute 60°

  CARMEX

  It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.

  Select to compare

  Configure now
  Starting from∗ ：	208.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole

  CARMEX

  With internal coolant hole, up to screw depth D1 x 2.
  
  [Features]
  · 3 functions with one tool. (drilling + threading + chamfering).
  · Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
  · Drilling tools are not required.
  · High-performance tools shorten the cycle time and reduce the machining costs.
  · Can be used for both blind holes and through holes.
  · Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
  · Thread processing with finished blade can be performed.
  · Both right-handed and left-handed threads can be processed with the same tool.

  Select to compare

  Configure now
  Starting from∗ ：	298.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole

  CARMEX

  With internal coolant hole, up to screw depth D1 x 2.
  
  [Features]
  · 3 functions with one tool. (drilling + threading + chamfering).
  · Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
  · Drilling tools are not required.
  · High-performance tools shorten the cycle time and reduce the machining costs.
  · Can be used for both blind holes and through holes.
  · Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
  · Thread processing with finished blade can be performed.
  · Both right-handed and left-handed threads can be processed with the same tool.

  Select to compare

  Configure now
  Starting from∗ ：	304.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W

  OSG

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

  OSG

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Groove-Free Tap Series X Performer Long Shank LT-S-XPF

  OSG

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	25.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws Long Shank TIN-LT-S-IRT

  OSG

  Select to compare

  Configure now
  Starting from∗ ：	64.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT

  OSG

  Select to compare

  Configure now
  Starting from∗ ：	53.57 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT

  OSG

  Select to compare

  Configure now
  Starting from∗ ：	47.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters

  CARMEX

  For both internal and external threading
  
  [Features]
  · Ultra-fine particle carbide with an advanced three layer PVD blue coating

  Select to compare

  Configure now
  Starting from∗ ：	208.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws

  CARMEX

  Metric thread / for I.D. thread
  
  [Features]
  · Ultra-fine particle carbide with an advanced three layer PVD blue coating

  Select to compare

  Configure now
  Starting from∗ ：	212.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  A Tap Series, Spiral Tap, Long Shank A-LT-SFT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Select to compare

  Configure now
  Starting from∗ ：	24.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  N Spiral Tap NSP

  NACHI(FUJIKOSHI)

  [Features]
  It can be used for machining threaded holes.
  [Features]
  This product can be used universally as it is not treated and its spiral groove can drain chips.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SG Point Tap SGPO

  NACHI(FUJIKOSHI)

  [Features]
  ・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.
  

  Select to compare

  Configure now
  Starting from∗ ：	36.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  I Series Point Tap IPO Blister Pack

  YAMAWA MFG

  [Features]
  · Through-hole tap for low speed machining with a drilling machine.
  · Use for machining iron products (SPC, SS400, etc.) that are commonly available.
  · Has a surface treatment (oxide treated) that is ideal for machining iron.
  · Machines small amounts of female threads for product prototypes.
  · The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.03 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SU Roll Tap SURZ

  YAMAWA MFG

  [Features]
  · A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
  · The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
  · Demonstrates effectiveness for roll tap machining of stainless steel.
  · Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	42.08 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

  YAMAWA MFG

  [Features]
  · A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
  · Can also be used for deep tapping operations.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	46.78 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...