Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

WIHA Pliers/Nippers/Pincers

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Electronic Needle-Nose Pliers, Narrow, Long Head, Curved, Approx. 40°

WIHA

Application: For holding small components as well as for holding and angling wires.

Design: With plain inside jaws.

Design: Width at tip is only 1.2 mm.

Head shape: Narrow, short head.

Material: C 70 special tool steel.

Starting from^∗ ：	27.36 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Classic Circlip Pliers for Outer Rings (Shafts), Angled

WIHA

Application: For fitting / removing circlips externally to / from shafts or axles.

DIN ISO 5254.

Starting from^∗ ：	14.40 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Circlip Pliers for Outer Rings (Shafts), Straight

WIHA

Application: For fitting / removing circlips externally to / from shafts or axles.

DIN ISO 5254.

Starting from^∗ ：	13.04 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Monier Pliers

WIHA

Increases your efficiency: Braiding and cutting of binding wire in one work step.

Lowers your costs: Reduced wear due to induction hardened cutting-edge.

Application: For binding (plaiting) and cutting wire netting in reinforced concrete structures in a single operation.

Design: Low wear lap joint, riveted and able to withstand high levels of load.

Design: High quality cutting edge with high cutting performance and low application of force due to highly precise processing.

Design: Good durability due to additional induction hardening of cutting edges to approx. 64 HRC.

Head shape: Classic style.

Material: High quality C 70 tool steel, tempered.

DIN ISO 9242.

Starting from^∗ ：	13.65 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Electronic Needle-Nose Pliers, Narrow, Short Head, Straight Form

WIHA

Application: For holding small components as well as for holding and angling wires.

Design: With plain inside jaws.

Design: Width at tip is only 1.2 mm.

Head shape: Narrow, short head.

Material: C 70 special tool steel.

Starting from^∗ ：	20.16 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Heavy-Duty Diagonal Cutters, Professional Electric, with DynamicJoint®, with Switchable Opening Spring

WIHA

Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.

Protects your health: Special DynamicJoint® design reduces effort required for cutting.

Protects your health: Reduces strain from continuous work thanks to opening spring.

Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables.

Standards: Manufactured acc. to IEC 60900.

Cutting many cables and wires to length over a long period requires a great deal of force and causes considerable strain on wrists. Wiha heavy-duty diagonal cutters with a two-component handle provide effortless cutting for tough usage. The plier joint with DynamicJoint® ensures hand force is optimally applied when cutting, providing up to 40% greater cutting force. Its triggered opening spring allows the user to work effortlessly for long periods of time. With their semi-circular head, these powerful pliers also guarantee a clean cut edge. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. These heavy-duty diagonal cutters are also manufactured as per the international IEC 60900 standard and are thus approved for working on live parts up to 1,000 V AC. The high-quality chrome-plated plier surface provides protection against rust, ensuring the pliers have a long service life. These heavy-duty diagonal cutters are the ideal tool for applications in the field of electrics.

DIN ISO 5749.

Starting from^∗ ：	31.22 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Circlip Pliers Classic with MagicTips®, for Outer Rings (Shafts), Straight

WIHA

Lowers your costs: Prevents damage caused by lost circlips in the work area.

Saves time: Safe and sturdy grip on circlips.

Application: For fitting / removing circlips externally to / from shafts or axles.

DIN ISO 5254.

Starting from^∗ ：	16.35 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Circlip Pliers for Inner Rings (Holes), Angled

WIHA

Application: For inserting / removing circlips from inside bores.

DIN ISO 5256.

Starting from^∗ ：	13.62 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Circlip Pliers for Inner Rings (Holes), Straight

WIHA

Application: For inserting / removing circlips from inside bores.

DIN ISO 5256.

Starting from^∗ ：	12.71 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Oblique End Cutting Nippers Electronic, Very Narrow, Short Head without Bevelled Edge

WIHA

Application: For absolutely flush cutting of soft wires in places which are difficult to access in the electronics industry.

Design: Cutting edge with full flush cutter function.

Design: Edge at 30° to face end of pliers for cutting obliquely from above or from the side.

Head shape: Extremely narrow, short head for working in particullarly restricted spaces.

Material: C 70 special tool steel.

Starting from^∗ ：	23.86 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Circlip Pliers Classic with MagicTips®, for Inner Rings (Holes), Angled

WIHA

Lowers your costs: Prevents damage caused by lost circlips in the work area.

Saves time: Safe and sturdy grip on circlips.

Application: For inserting / removing circlips from inside bores.

DIN ISO 5256.

Starting from^∗ ：	16.19 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Circlip Pliers Classic with MagicTips®, for Inner Rings (Holes), Straight

WIHA

Lowers your costs: Prevents damage caused by lost circlips in the work area.

Saves time: Safe and sturdy grip on circlips.

Application: For inserting / removing circlips from inside bores.

DIN ISO 5256.

Starting from^∗ ：	15.20 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Circlip Pliers Classic with MagicTips®, for Outer Rings (Shafts), Angled

WIHA

Lowers your costs: Prevents damage caused by lost circlips in the work area.

Saves time: Safe and sturdy grip on circlips.

Application: For fitting / removing circlips externally to / from shafts or axles.

DIN ISO 5254.

Starting from^∗ ：	18.02 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Corner Pipe Pliers, 90°

WIHA

Application: Safe and secure grip on pipes, flat workpieces and nuts.

DIN 5234.

Starting from^∗ ：	38.17 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Corner Pipe Pliers, S-Mouth

WIHA

Application: Safe and secure grip on pipes and hex nuts.

DIN 5234.

Starting from^∗ ：	38.17 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Crimping Pliers

WIHA

Application: For crimping end sleeves acc. to DIN 46228 parts 1 + 4.

Design: Sleeve and conductor inserted from the side.

Design: Trapezoidal or semi-circular profiles for a secure connection between end sleeve and conductor.

Head shape: Fixed profile grooves for the relevant conductor cross-sections.

Material: High-quality tool steel, tempered.

DIN ISO 5743.

Starting from^∗ ：	22.79 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Gripping Pliers, with Wire Cutter

WIHA

Application: Wire cutter for cutting welded wires.

Application: Clamping and gripping of round and flat material.

Design: Single-handed operation with quick-release lever, adjusting screw and integrated wire cutter.

Head shape: Bent gripper jaws with wire cutter.

Material: Forged jaws made of chrome-vanadium-steel.

Material: Body of pliers made of high-resistance special steel, nickel-plated.

Starting from^∗ ：	19.92 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Heavy-Duty End Cutting Nippers

WIHA

Application: Also appropriate for binding (plaiting) and cutting wire netting in reinforced concrete structures.

Application: Power assisted, all round diagonal cutter for soft wires as well as demanding piano wires.

DIN ISO 5748.

Starting from^∗ ：	11.97 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Long Flat-Nose Pliers

WIHA

Application: Gripping and right-angled bending of wires and sheet metal parts.

DIN ISO 5745.

Starting from^∗ ：	15.49 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Long Round-Nose Pliers

WIHA

Application: Gripping and bending of wires and sheet metal parts.

DIN ISO 5745.

Starting from^∗ ：	15.23 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Monier Pliers, without Handle Cover

WIHA

Increases your efficiency: Braiding and cutting of binding wire in one work step.

Lowers your costs: Reduced wear due to induction hardened cutting-edge.

Application: For binding (plaiting) and cutting wire netting in reinforced concrete structures in a single operation.

DIN ISO 9242.

Starting from^∗ ：	13.10 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Pincers

WIHA

Application: For withdrawing and cutting nails and wire pins.

DIN ISO 9243.

Starting from^∗ ：	13.17 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Classic Precision Mechanic's Needle-Nose Pliers, with Cutting Edge and Opening Spring in Straight Shape

WIHA

Meets your requirements: For precise gripping, holding and cutting in precision mechanics and model-making.

Increases your efficiency: Extra-long plier head for inserting low-lying components.

Application: Grip and hold as well as cut soft and hard wires and cables, popular for precision mechanics and model-making applications.

DIN ISO 5745.

Starting from^∗ ：	19.86 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Combination Pliers Classic with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge

WIHA

Application: General purpose pliers for gripping and holding as well as cutting soft and hard wires and cables.

DIN ISO 5746.

Starting from^∗ ：	11.83 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Combination Pliers Industrial with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge

WIHA

Application: General purpose pliers for gripping and holding as well as cutting soft and hard wires and cables.

DIN ISO 5746.

Starting from^∗ ：	15.69 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Combination Pliers Professional Electric with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge

WIHA

Increases your efficiency: A secure, non-slip grip in all standard work situations.

Protects your health: Special DynamicJoint® design reduces effort required for cutting.

Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Application: General purpose pliers for gripping and holding as well as cutting soft and hard wires and cables.

Application: For work in the area of live parts up to 1,000 V AC.

Standards: Manufactured acc. to IEC 60900.

DIN ISO 5746.

Starting from^∗ ：	20.84 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Heavy-Duty Classic Monier Pliers

WIHA

Protects your health: Reduces stress on muscles and joints thanks to optimised leverage and up to 28% less cutting power needed.

Makes handling easier: Small and narrow design for twirling in low-lying binding wires.

Starting from^∗ ：	21.76 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Heavy-Duty Classic Plus Monier Pliers, without Handle Cover

WIHA

Protects your health: Reduces stress on muscles and joints thanks to optimised leverage and up to 28% less cutting power needed.

Makes handling easier: Small and narrow design for twirling in low-lying binding wires.

Starting from^∗ ：	23.48 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Industrial Long Round-Nose Pliers

WIHA

Application: Gripping and bending of wires and sheet metal parts.

DIN ISO 5745.

Starting from^∗ ：	18.79 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Craftsman's Cutters with Crimp Function

WIHA

Simplifies your work: Large blade notch and micro-toothed cutting edge prevent the cable from slipping out of the shears.

Increases your efficiency: Shears for electricians with stripping, skinning, crimping & cutting-to-length functions in a single tool.

Makes handling easier: The combination between a sturdy blade and an ergonomic handle with extra large handle holes enable users to make a flawless cut into cables up to 50 mm².

Increases your safety: Protective cover with retaining clip for safe carrying.

These electrical shears are the ideal companion for electricians out on jobs. The shears offer all-purpose use with their four functions: stripping, skinning, crimping and cutting to length. Cables can be effortlessly cut to length thanks to the large blade notch and micro-toothed cutting edge preventing the cable from slipping out of the shears. The shears can also be used to strip and skin cables. The notch behind the shear pivot makes it easy to crimp wire-end sleeves between 1 and 5 mm². The shears can be conveniently attached to a belt, ready for use, when out on jobs thanks to the practical protective cover with retaining clip.

Starting from^∗ ：	27.11 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Craftsman's Cutters, Standard Model Made of Stainless Steel

WIHA

Increases your efficiency: Can be used universally thanks to its small and compact form.

Starting from^∗ ：	11.37 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Crimping Pliers Professional Electric for Wire-End Sleeves Hexagonal Crimping

WIHA

Meets your requirements: Safe pressing in marked trapezoidal/semi-circular profiles.

Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Application: For work in the area of live parts up to 1,000 V AC.

Application: For crimping end sleeves acc. to DIN 46228 parts 1 + 4.

Standards: DIN ISO 5743.

Manufactured acc. to IEC 60900.

Starting from^∗ ：	27.37 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Crimping Pliers Professional Electric in Blister Pack

WIHA

Application: For work in the area of live parts up to 1,000 V AC.

Application: For crimping end sleeves acc. to DIN 46228 parts 1 + 4.

Standards: DIN ISO 5743.

Manufactured acc. to IEC 60900.

Starting from^∗ ：	36.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Crimping Pliers Professional Electric, Type 13

WIHA

Meets your requirements: Safe pressing in marked trapezoidal/semi-circular profiles.

Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Application: For work in the area of live parts up to 1,000 V AC.

Application: For crimping end sleeves acc. to DIN 46228 parts 1 + 4.

Standards: DIN ISO 5743.

Manufactured acc. to IEC 60900.

Starting from^∗ ：	35.01 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Electronic Stripping Pliers, Stripping Points 0.4-1.3mm

WIHA

Application: For gripping, cutting and stripping of wires with diameter.

Design: Wire stripping stations: 0,4 / 0.5 / 0.6 / 0.8 / 1.0 / 1.3 mm, AWG 26 / 24 / 22 / 20 / 18 / 16.

Design: With opening spring and locking mechanism.

Head shape: Wide, long head with ridged gripping surface, shears blade and firm wire stripping stations.

Material: C 70 special tool steel.

Starting from^∗ ：	21.91 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Electronic Stripping Pliers, Stripping Points 0.8-2.6mm

WIHA

Application: For gripping, cutting and stripping of wires with diameter.

Design: Wire stripping stations: 0.8 / 1.0 / 1.3 / 1.6 / 2.0 / 2.6 mm, AWG 20 / 18 / 16 / 14 / 12 / 10.

Design: With opening spring and locking mechanism.

Head shape: Wide, long head with ridged gripping surface, shears blade and firm wire stripping stations.

Material: C 70 special tool steel.

Starting from^∗ ：	21.91 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

End Cutting Nippers, Professional ESD, Narrow Head with Small Bevelled Edge

WIHA

Meets your requirements: For virtually flush cutting of soft copper wires.

Protects your health: Reduces strain from continuous work thanks to opening spring.

Lowers your costs: Electrostatically conductive tools protect electronic components from damage.

Application: The cutting edge with a minimal external bevel allows virtually flush cutting of soft copper wires.

Standards: IEC 61340-5-1.

DIN ISO 9654.

Starting from^∗ ：	42.15 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

End Cutting Nippers, Professional ESD, Wide Head with Small Bevelled Edge

WIHA

Meets your requirements: For virtually flush cutting of soft copper wires.

Protects your health: Reduces strain from continuous work thanks to opening spring.

Lowers your costs: Electrostatically conductive tools protect electronic components from damage.

Application: Cutting edge with full flush cutter function for virtually flush cutting.

Standards: DIN ISO 9654.

IEC 61340-5-1.

Starting from^∗ ：	41.70 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Flat-Nose Pliers, Professional ESD, Short, Flat Jaws

WIHA

Simplifies your work: Ideal for fine gripping and bending work in electronics.

Protects your health: Reduces strain from continuous work thanks to opening spring.

Lowers your costs: Electrostatically conductive tools protect electronic components from damage.

Application: Mainly for precision gripping and bending work.

Standards: DIN ISO 9655.

IEC 61340-5-1.

Starting from^∗ ：	31.63 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Heavy-Duty Diagonal Cutters, Classic, with DynamicJoint®

WIHA

Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.

Protects your health: Special DynamicJoint® design reduces effort required for cutting.

Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables.

Cutting many cables and wires to length over a long period requires a great deal of force and causes considerable strain on wrists. Wiha heavy-duty diagonal cutters with a Classic handle provide effortless cutting for tough usage. The plier joint with DynamicJoint® ensures hand force is optimally applied when cutting, providing up to 40% greater cutting force. With their semi-circular head, these powerful pliers also guarantee a clean cut edge. The heavy-duty diagonal cutters are especially suited to applications in the field of mechanics.

Starting from^∗ ：	19.54 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Heavy-Duty Diagonal Cutters, Industrial with, DynamicJoint®, with Switchable Opening Spring

WIHA

Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.

Protects your health: Reduces strain from continuous work thanks to opening spring.

Protects your health: Special DynamicJoint® design reduces effort required for cutting.

Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables.

Starting from^∗ ：	24.16 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

High-Leverage Combination Pliers, Classic, with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge

WIHA

Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.

DIN ISO 5746.

Starting from^∗ ：	17.76 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

High-Leverage Combination Pliers, Industrial Electric, with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge

WIHA

Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.

Application: For work in the area of live parts up to 1,000 V AC.

Standards: Manufactured acc. to IEC 60900.

DIN ISO 5746.

Starting from^∗ ：	26.46 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

High-Leverage Combination Pliers, Industrial, with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge

WIHA

Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.

DIN ISO 5746.

Starting from^∗ ：	21.80 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

High-Leverage Combination Pliers, Professional Electric, with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge

WIHA

Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.

Increases your efficiency: A secure, non-slip grip in all standard work situations.

Protects your health: Special DynamicJoint® design reduces effort required for cutting.

Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Application: For work in the area of live parts up to 1,000 V AC.

Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.

Standards: DIN ISO 5746.

Manufactured acc. to IEC 60900.

Starting from^∗ ：	27.56 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Product Category
Plier Type
Plier Type
Nipper Type
Overall Length(mm)
Shaft/hole
With or without Spring
Steel Wire Cutting Performance(φ/mm)
Copper Wire Cutting Performance(φ/mm)
Piano Wire Cutting Performance(φ/mm)
Plastic Cutting Performance(φ/mm)
Stranded Wire Cutting Ability(φ/mm)
Stainless steel cutting ability(φ/mm)
VA (VVF) Wire Cutting Capacity(φ/mm)
With/without tip claw replacement function
Tip claw diameter(mm)
Compatible Ring Size(mm)
Parts Type


Brand	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA
Product Series	Electronic Needle-Nose Pliers, Narrow, Long Head, Curved, Approx. 40°	Classic Circlip Pliers for Outer Rings (Shafts), Angled	Classic Circlip Pliers for Outer Rings (Shafts), Straight	Classic Monier Pliers	Electronic Needle-Nose Pliers, Narrow, Short Head, Straight Form	Heavy-Duty Diagonal Cutters, Professional Electric, with DynamicJoint®, with Switchable Opening Spring	Circlip Pliers Classic with MagicTips®, for Outer Rings (Shafts), Straight	Classic Circlip Pliers for Inner Rings (Holes), Angled	Classic Circlip Pliers for Inner Rings (Holes), Straight	Oblique End Cutting Nippers Electronic, Very Narrow, Short Head without Bevelled Edge	Circlip Pliers Classic with MagicTips®, for Inner Rings (Holes), Angled	Circlip Pliers Classic with MagicTips®, for Inner Rings (Holes), Straight	Circlip Pliers Classic with MagicTips®, for Outer Rings (Shafts), Angled	Classic Corner Pipe Pliers, 90°	Classic Corner Pipe Pliers, S-Mouth	Classic Crimping Pliers	Classic Gripping Pliers, with Wire Cutter	Classic Heavy-Duty End Cutting Nippers	Classic Long Flat-Nose Pliers	Classic Long Round-Nose Pliers	Classic Monier Pliers, without Handle Cover	Classic Pincers	Classic Precision Mechanic's Needle-Nose Pliers, with Cutting Edge and Opening Spring in Straight Shape	Combination Pliers Classic with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge	Combination Pliers Industrial with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge	Combination Pliers Professional Electric with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge	Heavy-Duty Classic Monier Pliers	Heavy-Duty Classic Plus Monier Pliers, without Handle Cover	Industrial Long Round-Nose Pliers	Craftsman's Cutters with Crimp Function	Craftsman's Cutters, Standard Model Made of Stainless Steel	Crimping Pliers Professional Electric for Wire-End Sleeves Hexagonal Crimping	Crimping Pliers Professional Electric in Blister Pack	Crimping Pliers Professional Electric, Type 13	Electronic Stripping Pliers, Stripping Points 0.4-1.3mm	Electronic Stripping Pliers, Stripping Points 0.8-2.6mm	End Cutting Nippers, Professional ESD, Narrow Head with Small Bevelled Edge	End Cutting Nippers, Professional ESD, Wide Head with Small Bevelled Edge	Flat-Nose Pliers, Professional ESD, Short, Flat Jaws	Heavy-Duty Diagonal Cutters, Classic, with DynamicJoint®	Heavy-Duty Diagonal Cutters, Industrial with, DynamicJoint®, with Switchable Opening Spring	High-Leverage Combination Pliers, Classic, with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge	High-Leverage Combination Pliers, Industrial Electric, with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge	High-Leverage Combination Pliers, Industrial, with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge	High-Leverage Combination Pliers, Professional Electric, with DynamicJoint® and OptiGrip, with Extra Long Cutting Edge
Starting from^∗	27.36 € *Unit price with basic configuration	14.40 € *Unit price with basic configuration	13.04 € *Unit price with basic configuration	13.65 € *Unit price with basic configuration	20.16 € *Unit price with basic configuration	31.22 € *Unit price with basic configuration	16.35 € *Unit price with basic configuration	13.62 € *Unit price with basic configuration	12.71 € *Unit price with basic configuration	23.86 € *Unit price with basic configuration	16.19 € *Unit price with basic configuration	15.20 € *Unit price with basic configuration	18.02 € *Unit price with basic configuration	38.17 € *Unit price with basic configuration	38.17 € *Unit price with basic configuration	22.79 € *Unit price with basic configuration	19.92 € *Unit price with basic configuration	11.97 € *Unit price with basic configuration	15.49 € *Unit price with basic configuration	15.23 € *Unit price with basic configuration	13.10 € *Unit price with basic configuration	13.17 € *Unit price with basic configuration	19.86 € *Unit price with basic configuration	11.83 € *Unit price with basic configuration	15.69 € *Unit price with basic configuration	20.84 € *Unit price with basic configuration	21.76 € *Unit price with basic configuration	23.48 € *Unit price with basic configuration	18.79 € *Unit price with basic configuration	27.11 € *Unit price with basic configuration	11.37 € *Unit price with basic configuration	27.37 € *Unit price with basic configuration	36.45 € *Unit price with basic configuration	35.01 € *Unit price with basic configuration	21.91 € *Unit price with basic configuration	21.91 € *Unit price with basic configuration	42.15 € *Unit price with basic configuration	41.70 € *Unit price with basic configuration	31.63 € *Unit price with basic configuration	19.54 € *Unit price with basic configuration	24.16 € *Unit price with basic configuration	17.76 € *Unit price with basic configuration	26.46 € *Unit price with basic configuration	21.80 € *Unit price with basic configuration	27.56 € *Unit price with basic configuration
Min. Shipping Days ：	7 Days	3 Days	3 Days	3 Days	3 Days	7 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	7 Days	7 Days	3 Days	7 Days	3 Days	5 Days	5 Days	5 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	7 Days	3 Days	3 Days
Product Category	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Plier Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Plier Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Nipper Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Overall Length(mm)	133	-	140 ～ 225	220 ～ 280	135	160 ～ 200	140 ～ 300	-	-	125	140 ～ 305	140 ～ 305	140 ～ 300	-	-	145 ～ 180	180 ～ 300	160 ～ 200	160	160	220 ～ 300	180 ～ 200	160	160 ～ 180	160 ～ 200	160 ～ 200	300	300	-	160	145	145	180	180	165	165	-	-	120	160 ～ 200	160 ～ 200	225	225	200 ～ 225	200 ～ 225
Shaft/hole	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
With or without Spring	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Steel Wire Cutting Performance(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Copper Wire Cutting Performance(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Piano Wire Cutting Performance(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Plastic Cutting Performance(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stranded Wire Cutting Ability(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stainless steel cutting ability(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
VA (VVF) Wire Cutting Capacity(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
With/without tip claw replacement function	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip claw diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Compatible Ring Size(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Parts Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Product Category
- Pliers
- Pliers
- Nippers
- Parts
Clear

Plier Type
- Pliers
- Retaining Ring Pliers
Clear

Plier Type
- Pliers
- Lead Pliers
- Longnose pliers
Clear

Nipper Type
- Nippers
- Heat Nippers
Clear

Overall Length(mm)
36

46

92

100

102.5

105

108

110

111.5

115

116

117

117.5

118

120

123

124

125

125.5

126

127

128

128.5

129

130

131

132

132.5

133

134

135

138

139

140

140|170|180|130

140|180

140|180|130|165

140|180|165

141

142

143

144

145

146

147

148

149

150

151

152

Approx. 152

152.5

153

154

155

156

157

158

158.5

159

160

161

162

163

164

165

166

167

168

169

170

170|180

171

172

173

174

175

178

179

180

180|250

181

183

185

186

188

189

190

191

192

193

194

195

197

199

200

Approx. 200

201.5

202

203

204

205

206

208

210

213

214.5

215

217

219

220

222

223

223.5

224

225

227

228

229

230

232

235

240

242

245

250

260

266

270

275

Approximately 275

280

282

285

Approximately 285

287

290

293

295

297

300

305

310

320

340

370

400

443

455

460

465

560

570

580

585

590

595

600

620

920
Clear

Shaft/hole
- For Shaft
- For Hole
- Use with both shaft and hole
Clear

With or without Spring
- Available
- N/A
Clear

Steel Wire Cutting Performance(φ/mm)
0.5

0.8

0.8 (Soft Iron Wire)

Tip blade: 0.8 or less, Side blade: 1.2 or less

0.9

1

1.0 (Soft Iron Wire)

1.2

1.2 (Soft Iron Wire)

1.4

1.5

1.6

1.8

1.9

2

2.15

2.2

2.3

2.4

2.5

2.6

2.75

2.8

3

3.2

3.4

3.5

3.6

4

5.0

-
Clear

Copper Wire Cutting Performance(φ/mm)
0.10～0.60

0.1～0.80

0.1 to 1.00

0.18～0.8

0.20～0.80

0.8

1

1.2

Tip blade: 1.2 or less, Side blade: 1.2 or less

1.5

1.6

2

2.3

2.5

2.6

2.8

3

3.2

3.3

3.5

3.6

4

4.5

8.0

14

-
Clear

Piano Wire Cutting Performance(φ/mm)
0.2

0.5

0.75

1

1.2

1.8

2

2.2

2.5

3

3.6

3.8
Clear

Plastic Cutting Performance(φ/mm)
1

1.5

2

3

4

5

6

8

9

10
Clear

Stranded Wire Cutting Ability(φ/mm)
1.25

2

5

5.5

8
Clear

Stainless steel cutting ability(φ/mm)
0.8

0.9

1

1.2

2

5.0
Clear

VA (VVF) Wire Cutting Capacity(φ/mm)
1.6 x 2 core

1.6・2・2.6

1.6 x 3 core

1.6X3 core

1.6×3

2.0 x 2 core

2 x 3 core

2.0 × 3 core

2X3

2.0X3 core

2X3 core

2.0×3

2.0 x 4 core

2.6 x 3 core

2.6X3

2.6X3 core
Clear

With/without tip claw replacement function
- Available
- N/A
Clear

Tip claw diameter(mm)
0.9

1.3

1.4

1.8

Tip diameter (ømm): 1.8

2

2.3

3.2

3.4

3.5

4.5
Clear

Compatible Ring Size(mm)
3-4

3–8

5-9

C-type for shaft: 10-30; Grip-type for shaft: 6-9; For hole: 12-30

10-25

12~13

19~30

19～40

25-50

32~75

32–80

40-65

82-180
Clear

Parts Type
- Blade Tip
- Spring
- Grip
- Snap ring plier tip claw
Clear

Narrow search by specifying Brand

- KNIPEX (99)
- WIHA (84)
- ESCO (67)
- MUROMOTO TEKKO (64)
- FUJIYA (50)
- HOZAN (39)
- PHOENIX CONTACT (26)
- TSUNODA (26)
- ENGINEER (25)
- KTC(KYOTO TOOL) (24)
- TRUSCO NAKAYAMA (22)
- MAEDAKINNZOKU (21)
- KEIBA (16)
- LOBTEX (13)
- THREE PEAKS GIKEN (11)
- BERNSTEIN AG (10)
- BAHCO (9)
- SMATO (9)
- IGARASHI PLIERS (8)
- HANAZONO TOOL (7)
- WEIDMUELLER (7)
- MITOLOY (6)
- E VALUE (5)
- LINDSTROM (4)
- FACOM (4)
- ARC (3)
- GEDORE (3)
- CIMCO (3)
- HAZET (3)
- NWS (3)
- SIGNET (3)
- SK 11 (3)
- AS ONE (2)
- H & H (2)
- M & M (2)
- NEPROS (2)
- ONISHI MANUFACTURING (2)
- RENNSTEIG (2)
- RITTAL (2)
- TRAD (2)
- ARC GREATTOOL (1)
- VICTORY (1)
- ANEX (1)
- WOLFCRAFT (1)
- GRIPONTOOLS (1)
- HANDIWORK (1)
- SUPER TOOL (1)
- WELLER (1)
Clear