EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

BLICKLE Castors, Accessories（Caster Type：Screw-In Type）

Search by sub-category

518

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Stainless Steel Swivel Castor, LEX-TPA Series

BLICKLE

Stainless Steel Swivel Castor, with Top Plate Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre

Bracket: LEX series

high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
all parts including axle material are corrosion-resistant
double ball bearing in the swivel head
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: TPA series

tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
wheel centre: high-quality polypropylene, impact resistant, colour silver grey

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
tread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

Starting from^∗ ：	64.97 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Levelling Castor, HRP-POA Series

BLICKLE

Levelling Castor, with Integrated Truck Lock and Top Plate Fitting, Nylon Wheel, HRP-POA Series

Bracket: HRP series

die-cast aluminium, powder-coated, colour ivory
sealed ball bearing in the swivel head
steel top plate
truck lock made of hard rubber
height adjustment using wrench or integrated adjustment wheel
steel parts zinc-plated, blue-passivated, Cr6-free

Wheel: POA series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour black

Other features:

Load capacity determined under the following conditions:
– speed: max. 1 km/h
– temperature: +15 °C to +30 °C
– hardness, horizontal tread without obstacles
– route: A cooling off period of 15 minutes is required after a maximum of 50 m

Starting from^∗ ：	49.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Swivel Castor, LO-GST Series

BLICKLE

Heavy Duty Welded Steel Swivel Castor, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Cast Iron Wheel Centre

Bracket: LO series

solid welded steel construction, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
four specially-shaped, hardened bearing seats for additional strength
bolted and secured welded central kingpin, extremely strong
swivel head seal with labyrinth design
grease nipple

Wheel: GST series

tread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-staining
wheel centre: rugged grey cast iron, with grease nipple from wheel Ø 160 mm, lacquered, colour silver

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	278.03 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressed Steel Swivel Head with Top Plate Fitting, DK-L Series

BLICKLE

Pressed Steel Swivel Head with Top Plate Fitting

pressed steel
double ball bearing in the swivel head
strong central kingpin
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
zinc-plated, blue-passivated, Cr6-free
Combination with a fixed castor results in a swivel castor with no offset
For all applications

Starting from^∗ ：	43.94 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LH-ALST Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LH series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
heavy fork and top plate
double ball bearing in the swivel head
bolted and secured central kingpin, extremely strong
particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats

Wheel: ALST series

tread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	126.73 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-ALTH Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LKR series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	95.16 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Leveling Casters - Following Swiveling Operating & Release Levers, Top Plate, Ball Bearing, Extrathane Polyurethane Tread, Aluminum Wheel

BLICKLE

Rig:

Made of heavy pressed steel, with double ball bearing in the swivel head, swivel head seals. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves. Steel truck lock. Height adjustment with swivelling operating and release lever. Bolted wheel axle. Zinc-plated, blue-passivated, Cr6-free.

Wheels:
Made of high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane®, low-noise operation, low rolling resistance, good floor preservation, very high abrasion resistance, high cut and tear propagation resistance, very good chemical connection with the wheel center.
Wheel center/rim: :
Made of die-cast aluminum. Casted tread. .
Wheel center color:
silver

Starting from^∗ ：	338.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Swivel Head, DK-LS Series

BLICKLE

Heavy Duty Welded Steel Swivel Head

particularly robust welded steel construction
Axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355
bolted and secured welded central kingpin, extremely strong
dust and splash-proof
grease nipple
Zinc-plated, yellow-passivated, Cr6-free
Combination with a fixed castor results in a swivel castor with no offset
For all applications

Starting from^∗ ：	126.50 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Fixed Castor, BH-ALST Series

BLICKLE

Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Aluminium Wheel Centre, BH-ALST Series

Bracket: BH series

pressed steel, zinc-plated, blue-passivated, Cr6-free
heavy fork and top plate

Wheel: ALST series

tread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	82.28 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Levelling Castor, HRLK-ALTH Series

BLICKLE

Levelling Castor, with Fixed Foot and Height-Adjustable Wheel, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre

Bracket: HRLK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
steel truck lock with rubber pad
height adjustment with lever

Wheel: ALTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	215.11 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Levelling Castor, HRSP-GSPO Series

BLICKLE

Levelling Castor, with Integrated Truck Lock and Top Plate Fitting, Heavy Duty Wheel Made of Compressed Cast Nylon

Bracket: HRSP series

die-cast aluminium, powder-coated, colour ivory
sealed ball bearing in the swivel head
steel top plate
truck lock made of aluminium
height adjustment with wrench
steel parts zinc-plated, blue-passivated, Cr6-free

Wheel: GSPO series

high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

Other features:

Load capacity determined under the following conditions:
– speed: max. 1 km/h
– temperature: +15 °C to +30 °C
– hardness, horizontal tread without obstacles
– route: A cooling off period of 15 minutes is required after a maximum of 50 m

Starting from^∗ ：	245.47 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Stainless Steel Swivel Castor, LEX-POBS Series

BLICKLE

Stainless Steel Swivel Castor, with Top Plate Fitting Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Nylon Wheel Centre, with Synthetic Thread Guard

Bracket: LEX series

high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
all parts including axle material are corrosion-resistant
double ball bearing in the swivel head
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POBS series

tread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-staining, very low rolling resistance, high dynamic load capacity, corrosion and hydrolysis-resistant
wheel centre: high-quality nylon 6, impact resistant, colour black

Other features:

with synthetic thread guard, small
corrosion and hydrolysis-resistant
high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Starting from^∗ ：	130.35 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LRA-TPA Series

BLICKLE

Light Duty Swivel Castor, with Bolt Hole Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LRA-TPA Series

Bracket: LRA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: TPA series

tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
wheel centre: high-quality polypropylene, impact resistant, colour silver grey

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
tread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

Starting from^∗ ：	7.40 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Directional Lock, RI Series

BLICKLE

Directional Lock

for locking the swivel motion of a swivel castor in specific directions
When activated, the swivel castor assumes the function of a fixed castor
For subsequent installation

Starting from^∗ ：	23.48 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Twin Wheel Fixed Castor, BSD-GSPO Series

BLICKLE

Heavy Duty Welded Steel Twin Wheel Fixed Castor, Heavy Duty Wheel Made of Compressed Cast Nylon

Bracket: BSD series

particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free or lacquered, red

Wheel: GSPO series

high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

Other features:

high chemical resistance to many aggressive substances
reduced moisture absorption
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
consider the surface pressure on sensitive floors due to high point loads
Fixed castors: long side of plate parallel to the wheel axle

Starting from^∗ ：	259.50 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Fixed Castor, BS-SPKVS Series

BLICKLE

Heavy Duty Welded Steel Fixed Castor, Solid Steel Flanged Wheel

Bracket: BS series

particularly robust welded steel construction
zinc-plated, yellow-passivated, Cr6-free

Wheel: SPKVS series

heat-treatable steel, hardness 190–230 HB

Other features:

chemical resistance to many aggressive substances
operating temperature:
ball bearing version: -20 °C to +120 °C
heat-resistant ball bearing version: -30 °C to +300 °C, load capacity reduced by 50% at +300 °C
the load capacities provided in the table refer to the allocation of flanged wheels to rail profiles in accordance with DIN 536 specified below (crane rail standard):
SPKVS 50K–SPKVS 200K: A45
SPKVS 250K: A55
SPKVS 300K–SPKVS 400K: A65

Starting from^∗ ：	227.40 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Twin Compact Swivel Castor, LD-PO Series

BLICKLE

Twin Compact Swivel Castor, Nylon Wheel, LD-PO Series

Bracket: LD series

Swivel bracket: zinc die-cast
high-quality ball bearing in the swivel head
zinc-plated steel threaded pin

Wheel: PO series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

Other features:

high chemical resistance to many aggressive substances
operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	47.83 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, L-GSPO Series

BLICKLE

Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Heavy Duty Wheel Made of Compressed Cast Nylon

Bracket: L series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 150 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: GSPO series

high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

Other features:

high chemical resistance to many aggressive substances
reduced moisture absorption
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
consider the surface pressure on sensitive floors due to high point loads
Test in compliance with DIN 12530 with extended breaks to avoid thermal overloading

Starting from^∗ ：	61.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-ALBS Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALBS series

tread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	96.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-ALTH Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	78.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-PATH Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour silver grey

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Starting from^∗ ：	38.73 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-ALBS Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LKR series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALBS series

tread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	113.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKRA-TPA Series

BLICKLE

Light Duty Swivel Castor, with Bolt Hole Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LKRA-TPA Series

Bracket: LKRA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: TPA series

tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
wheel centre: high-quality polypropylene, impact resistant, colour silver grey

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
tread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

Starting from^∗ ：	21.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Stainless Steel Heavy Duty Swivel Castor, LKX-SPO Series

BLICKLE

Stainless Steel Heavy Duty Swivel Castor, with Top Plate Fitting, Nylon Heavy Duty Wheel

Bracket: LKX series

high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
all parts including axle material are corrosion-resistant
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: SPO series

high-quality nylon 6, impact resistant, hardness 70 Shore D, extremely robust heavy-duty version, colour natural white

Other features:

high chemical resistance to many aggressive substances
operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	167.58 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LPA-TPA Series

BLICKLE

Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LPA-TPA Series

Bracket: LPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: TPA series

tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
wheel centre: high-quality polypropylene, impact resistant, colour silver grey

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
tread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

Starting from^∗ ：	8.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Swivel Castor, LSFN-GTH Series

BLICKLE

Heavy Duty Welded Steel Swivel Castor, with Steel Spring, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel Centre

Bracket: LSFN series

particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
robust spring structure with steel spring
maintenance-free spring mechanism
axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
bolted and secured welded central kingpin, extremely strong
dust and splash-proof
grease nipple

Wheel: GTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: rugged grey cast iron
with grease nipple, lacquered, colour silver

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	472.13 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Swivel Castor, LS-GSPO Series

BLICKLE

Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel Made of Compressed Cast Nylon

Bracket: LS series

particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
bolted and secured welded central kingpin, extremely strong
dust and splash-proof
grease nipple

Wheel: GSPO series

high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

Other features:

high chemical resistance to many aggressive substances
reduced moisture absorption
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
consider the surface pressure on sensitive floors due to high point loads

Starting from^∗ ：	322.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Head, DK-LUH Series

BLICKLE

Pressed Steel Swivel Head, Heavy Duty Design, Enclosed

four-point ball bearing for extremely heavy loads
enclosed and sealed swivel head
particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats
zinc-plated, blue-passivated, Cr6-free
Combination with a fixed castor results in a swivel castor with no offset
For all applications

Starting from^∗ ：	94.75 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Starlock Cap, ST-KA Series

BLICKLE

Starlock Cap

For locking light wheels to an axle
Attractive hub termination
For use in situations with low side load

Starting from^∗ ：	1.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Fixed Castor, BH-ALBS Series

BLICKLE

Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel Centre, BH-ALBS Series

Bracket: BH series

pressed steel, zinc-plated, blue-passivated, Cr6-free
heavy fork and top plate

Wheel: ALBS series

tread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	91.66 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Levelling Castor, HRSP-POA Series

BLICKLE

Levelling Castor, with Integrated Truck Lock and Top Plate Fitting, Nylon Wheel, HRSP-POA Series

Bracket: HRSP series

die-cast aluminium, powder-coated, colour ivory
sealed ball bearing in the swivel head
steel top plate
truck lock made of aluminium
height adjustment with wrench
steel parts zinc-plated, blue-passivated, Cr6-free

Wheel: POA series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour black

Other features:

Load capacity determined under the following conditions:
– speed: max. 1 km/h
– temperature: +15 °C to +30 °C
– hardness, horizontal tread without obstacles
– route: A cooling off period of 15 minutes is required after a maximum of 50 m

Starting from^∗ ：	146.10 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Twin Compact Swivel Castor, LD-VSTH Series

BLICKLE

Twin Compact Swivel Castor, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel Centre

Bracket: LD series

Swivel bracket: zinc die-cast
high-quality ball bearing in the swivel head
zinc-plated steel threaded pin

Wheel: VSTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: steel

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	91.25 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-ALST Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALST series

tread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	87.06 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Swivel Castor, LO-PO Series

BLICKLE

Heavy Duty Welded Steel Swivel Castor, Nylon Wheel

Bracket: LO series

solid welded steel construction, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
four specially-shaped, hardened bearing seats for additional strength
bolted and secured welded central kingpin, extremely strong
swivel head seal with labyrinth design
grease nipple

Wheel: PO series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	177.80 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressed Steel Compact Swivel Castor, LR-VSTH Series

BLICKLE

Pressed Steel Compact Swivel Castor, with Bolt Hole, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel Centre

Bracket: LR series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: VSTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: steel

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	76.29 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Swivel Castor, LS-GB Series

BLICKLE

Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel Centre

Bracket: LS series

particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
bolted and secured welded central kingpin, extremely strong
dust and splash-proof
grease nipple

Wheel: GB series

tread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-staining
wheel centre: rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	339.25 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Heavy Duty Welded Steel Swivel Castor, LS-PS Series

BLICKLE

Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Pneumatic Tyre

Bracket: LS series

particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
bolted and secured welded central kingpin, extremely strong
dust and splash-proof
grease nipple

Wheel: PS series

tyre: pneumatic tyre with zig-zag profile, hardness 60 Shore A, colour black, 6-ply rating
rim: heavy pressed steel, with welded tubular steel hub, zinc-plated, blue-passivated, Cr6-free

Other features:

chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +50 °C
the wheel and tyre dimensions provided here apply to new tyres that are not bearing a load. Their width and diameter may change when they are in use.
speeds up to 25 km/h with reduced load capacity

Starting from^∗ ：	584.44 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Extra Heavy Duty Welded Steel Twin Wheel Swivel Castor, LSSD-GSPO Series

BLICKLE

Extra Heavy Duty Welded Steel Twin Wheel Swivel Castor, Extra Heavy Duty Swivel Head, Heavy Duty Wheel Made of Compressed Cast Nylon

Bracket: LSSD series

particularly robust welded steel construction
four-point swivel bearing for extremely heavy loads
dust and splash-proof
grease nipple

Wheel: GSPO series

high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

Other features:

high chemical resistance to many aggressive substances
reduced moisture absorption
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
consider the surface pressure on sensitive floors due to high point loads

Starting from^∗ ：	32,956.07 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Leveling Casters - Following Swiveling Operating And Release Levers, With Top Plate Fitting, Plain Bore, Impact Resistant White Nylon Wheel

BLICKLE

Rig:

Made of heavy pressed steel, with double ball bearing in the swivel head, swivel head seals. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves. Steel truck lock. Height adjustment with swivelling operating and release lever. Bolted wheel axle. Zinc-plated, blue-passivated, Cr6-free.

Wheels:
Made of high-quality, impact-resistant nylon.
Tread/tire:
Made of high-quality, impact-resistant nylon.
Wheel center color:
natural white

Starting from^∗ ：	309.91 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Fixed Castor, BH-G Series

BLICKLE

Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Cast Iron Wheel, BH-G Series

Bracket: BH series

pressed steel, zinc-plated, blue-passivated, Cr6-free
heavy fork and top plate

Wheel: G series

rugged grey cast iron, hardness 180–220 HB, grease nipple, lacquered, colour silver

Other features:

chemical resistance to many aggressive substances
consider the surface pressure on sensitive floors due to high point loads
to be lubricated according to the application temperature

Starting from^∗ ：	42.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Fixed Castor, BH-GB Series

BLICKLE

Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel Centre

Bracket: BH series

pressed steel, zinc-plated, blue-passivated, Cr6-free
heavy fork and top plate

Wheel: GB series

tread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-staining
wheel centre: rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	123.18 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Fixed Castor, BH-SVS Series

BLICKLE

Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Extra Heavy Duty Solid Steel Wheel

Bracket: BH series

pressed steel, zinc-plated, blue-passivated, Cr6-free
heavy fork and top plate

Wheel: SVS series

heat-treatable steel, hardness 190–230 HB, slightly crowned tread

Other features:

chemical resistance to many aggressive substances
operating temperature: -20 °C to +120 °C
consider the surface pressure on sensitive floors due to high point loads

Starting from^∗ ：	87.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Fixed Castor, BH-VPP Series

BLICKLE

Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with Standard Solid Rubber Tyre, with Synthetic Rim

Bracket: BH series

pressed steel, zinc-plated, blue-passivated, Cr6-free
heavy fork and top plate

Wheel: VPP series

tyre: standard solid rubber, hardness 80 Shore A, colour black
rim: high-quality polypropylene, impact resistant, colour black

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

Starting from^∗ ：	106.80 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Light Duty Fixed Castor, BKPA-VPA Series

BLICKLE

Light Duty Fixed Castor, with Top Plate Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, BKPA-VPA Series

Bracket: BKPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free

Wheel: VPA series

tyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-staining
rim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour black

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

Starting from^∗ ：	19.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Fixed Castor, BK-POTH Series

BLICKLE

Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel Centre, BK-POTH Series

Bracket: BK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free

Wheel: POTH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour natural white

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Starting from^∗ ：	41.10 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Caster Type
Mounting Height H(mm)
Load Range(daN)
Stopper
Wheel Material
Wheel Characteristics
Fitting Material
Mounting Hole Type
Mounting Hole Pitch, Long Length Direction L1(mm)
Mounting Hole Pitch, Short Length Direction W1(mm)
Thread Dia.
Wheel Dia. D(mm)
Mounting Hole Pitch Circular Diameter(mm)


Brand	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE
Product Series	Stainless Steel Swivel Castor, LEX-TPA Series	Levelling Castor, HRP-POA Series	Heavy Duty Welded Steel Swivel Castor, LO-GST Series	Pressed Steel Swivel Head with Top Plate Fitting, DK-L Series	Pressed Steel Swivel Castor, LH-ALST Series	Pressed Steel Swivel Castor, LKR-ALTH Series	Leveling Casters - Following Swiveling Operating & Release Levers, Top Plate, Ball Bearing, Extrathane Polyurethane Tread, Aluminum Wheel	Heavy Duty Welded Steel Swivel Head, DK-LS Series	Pressed Steel Fixed Castor, BH-ALST Series	Levelling Castor, HRLK-ALTH Series	Levelling Castor, HRSP-GSPO Series	Stainless Steel Swivel Castor, LEX-POBS Series	Light Duty Swivel Castor, LRA-TPA Series	Directional Lock, RI Series	Heavy Duty Welded Steel Twin Wheel Fixed Castor, BSD-GSPO Series	Heavy Duty Welded Steel Fixed Castor, BS-SPKVS Series	Twin Compact Swivel Castor, LD-PO Series	Pressed Steel Swivel Castor, L-GSPO Series	Pressed Steel Swivel Castor, LK-ALBS Series	Pressed Steel Swivel Castor, LK-ALTH Series	Pressed Steel Swivel Castor, LK-PATH Series	Pressed Steel Swivel Castor, LKR-ALBS Series	Light Duty Swivel Castor, LKRA-TPA Series	Stainless Steel Heavy Duty Swivel Castor, LKX-SPO Series	Light Duty Swivel Castor, LPA-TPA Series	Heavy Duty Welded Steel Swivel Castor, LSFN-GTH Series	Heavy Duty Welded Steel Swivel Castor, LS-GSPO Series	Pressed Steel Swivel Head, DK-LUH Series	Starlock Cap, ST-KA Series	Pressed Steel Fixed Castor, BH-ALBS Series	Levelling Castor, HRSP-POA Series	Twin Compact Swivel Castor, LD-VSTH Series	Pressed Steel Swivel Castor, LK-ALST Series	Heavy Duty Welded Steel Swivel Castor, LO-PO Series	Pressed Steel Compact Swivel Castor, LR-VSTH Series	Heavy Duty Welded Steel Swivel Castor, LS-GB Series	Heavy Duty Welded Steel Swivel Castor, LS-PS Series	Extra Heavy Duty Welded Steel Twin Wheel Swivel Castor, LSSD-GSPO Series	Leveling Casters - Following Swiveling Operating And Release Levers, With Top Plate Fitting, Plain Bore, Impact Resistant White Nylon Wheel	Pressed Steel Fixed Castor, BH-G Series	Pressed Steel Fixed Castor, BH-GB Series	Pressed Steel Fixed Castor, BH-SVS Series	Pressed Steel Fixed Castor, BH-VPP Series	Light Duty Fixed Castor, BKPA-VPA Series	Pressed Steel Fixed Castor, BK-POTH Series
Starting from^∗	64.97 € *Unit price with basic configuration	49.85 € *Unit price with basic configuration	278.03 € *Unit price with basic configuration	43.94 € *Unit price with basic configuration	126.73 € *Unit price with basic configuration	95.16 € *Unit price with basic configuration	338.15 € *Unit price with basic configuration	126.50 € *Unit price with basic configuration	82.28 € *Unit price with basic configuration	215.11 € *Unit price with basic configuration	245.47 € *Unit price with basic configuration	130.35 € *Unit price with basic configuration	7.40 € *Unit price with basic configuration	23.48 € *Unit price with basic configuration	259.50 € *Unit price with basic configuration	227.40 € *Unit price with basic configuration	47.83 € *Unit price with basic configuration	61.34 € *Unit price with basic configuration	96.45 € *Unit price with basic configuration	78.00 € *Unit price with basic configuration	38.73 € *Unit price with basic configuration	113.46 € *Unit price with basic configuration	21.90 € *Unit price with basic configuration	167.58 € *Unit price with basic configuration	8.62 € *Unit price with basic configuration	472.13 € *Unit price with basic configuration	322.62 € *Unit price with basic configuration	94.75 € *Unit price with basic configuration	1.15 € *Unit price with basic configuration	91.66 € *Unit price with basic configuration	146.10 € *Unit price with basic configuration	91.25 € *Unit price with basic configuration	87.06 € *Unit price with basic configuration	177.80 € *Unit price with basic configuration	76.29 € *Unit price with basic configuration	339.25 € *Unit price with basic configuration	584.44 € *Unit price with basic configuration	32,956.07 € *Unit price with basic configuration	309.91 € *Unit price with basic configuration	42.55 € *Unit price with basic configuration	123.18 € *Unit price with basic configuration	87.15 € *Unit price with basic configuration	106.80 € *Unit price with basic configuration	19.85 € *Unit price with basic configuration	41.10 € *Unit price with basic configuration
Min. Shipping Days ：	7 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	5 Days	5 Days	5 Days	7 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	23 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	5 Days	7 Days	5 Days	23 Days	5 Days	5 Days	5 Days	5 Days	7 Days	5 Days	5 Days
Caster Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type	Screw-In Type
Mounting Height H(mm)	102 ～ 235	190	170 ～ 295	72	120 ～ 295	133 ～ 136	117	84 ～ 130	120 ～ 295	117 ～ 140	190	150 ～ 195	69 ～ 124	110 ～ 235	125 ～ 390	170	195	165	110 ～ 262	58 ～ 262	110 ～ 245	130 ～ 155	108 ～ 161	71 ～ 245	71 ～ 123	170	170 ～ 530	122	102 ～ 235	120 ～ 295	195	195	110 ～ 262	170 ～ 295	72	145 ～ 730	170 ～ 205	205	117	120 ～ 295	97 ～ 295	295	125 ～ 295	111 ～ 185	108 ～ 155
Load Range(daN)	35.01 to 80.00 / 80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00	Up to 35.00	Up to 35.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	140.01 to 220.00 / 320.01 to 485.00	140.01 to 220.00	-	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	140.01 to 220.00 / 220.01 to 320.00	Up to 35.00	80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00	Up to 35.00 / 35.01 to 80.00	-	Up to 35.00	Up to 35.00	220.01 to 320.00	220.01 to 320.00	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	140.01 to 220.00 / 320.01 to 485.00 / 485.01 to 750.00	80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	220.01 to 320.00 / 320.01 to 485.00	35.01 to 80.00 / 80.01 to 140.00	320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	Up to 35.00 / 35.01 to 80.00	Up to 35.00 / 750.01 or More	Up to 35.00	-	-	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	Up to 35.00	220.01 to 320.00	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	Up to 35.00 / 320.01 to 485.00 / 485.01 to 750.00	140.01 to 220.00	Up to 35.00 / 750.01 or More	Up to 35.00 / 320.01 to 485.00 / 485.01 to 750.00	Up to 35.00	220.01 to 320.00	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	485.01 to 750.00 / 750.01 or More	220.01 to 320.00	35.01 to 80.00 / 80.01 to 140.00	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00
Stopper	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Wheel Material	Engineering Plastics	Others	Others	-	Aluminum	Aluminum	Aluminum	-	Aluminum	Aluminum	Others	Engineering Plastics	Engineering Plastics	-	Engineering Plastics	Steel	Engineering Plastics	Engineering Plastics	Aluminum	Aluminum	Engineering Plastics	Aluminum	Engineering Plastics	Engineering Plastics	Engineering Plastics	Others	Engineering Plastics	-	-	Aluminum	Others	Steel	Aluminum	Engineering Plastics	Steel	Others	Steel	Engineering Plastics	Engineering Plastics	Others	Others	Steel	Engineering Plastics	Engineering Plastics	Engineering Plastics
Wheel Characteristics	Conductivity	-	-	-	Antistatic	-	-	-	Antistatic	-	-	-	Conductivity	Conductivity	-	-	-	-	Antistatic / Conductivity	Antistatic / Conductivity	Conductivity	Antistatic	Conductivity	Conductivity	Conductivity	-	-	-	-	Antistatic / Conductivity	-	Conductivity	Antistatic	Conductivity	-	-	-	-	-	-	-	Conductivity	Heat Resistance	Conductivity	-
Fitting Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Hole Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Hole Pitch, Long Length Direction L1(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Hole Pitch, Short Length Direction W1(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Thread Dia.	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Wheel Dia. D(mm)	80 ～ 200	150	125 ～ 250	45	80 ～ 250	100	80	50 ～ 90	80 ～ 250	80 ～ 100	150	125 ～ 160	50 ～ 100	80 ～ 200	80 ～ 300	125	160	125	80 ～ 200	50 ～ 200	80 ～ 200	100 ～ 125	80 ～ 125	50 ～ 200	50 ～ 100	125	125 ～ 400	72	80 ～ 200	80 ～ 250	160	160	80 ～ 200	125 ～ 250	50	100 ～ 620	125 ～ 160	160	80	80 ～ 250	65 ～ 250	250	100 ～ 250	80 ～ 150	75 ～ 125
Mounting Hole Pitch Circular Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

1
2
3
4
5
Next >>

Filter by:

Narrow search by specifying spec./dim.

Caster Type
- Plate Type Swivel
- Plate Type Fixed
- Screw-In Type
- With Shock Absorber
- With Leveling Mounts
- Plug-In Type
- Resin
- Through Hole Type
- Angle Type
- Others
- Related Components
- Corner Caster
- Dual Wheels
- Plate Type Ball Caster
- Rotation Type
- Rotation Brake Type
Images

Clear

Mounting Height H(mm)
12.5

21

23.5

26

30

32

34

35

36

39

40

42

42.5

43

43.5

44

44.5

45

46

46.5

47

48

49

50

50.5

51

51.5

52

53

54

54.5

55

56

57

57.5

58

58.5

59

59.5

60

61

62

63

63.5

64

65

65.5

66

67

68

68.5

69

70

70.5

71

72

72.5

73

74

74.5

75

76

77

77.5

78

79

79~72

79.5

80

81

82

83

84

84.5

85

86

87

87~75

87.5

88

89

89~77

90

91

92

92.5

93

94

95

96

96.5

97

98

99

100

101

102

102~95

102.5

103

104

104~99

105

106

107

108

109

110

111

111.5

112

112~100

112.5

113

114

114~102

115

117

117.5

118

119

120

121

122

123

124

124.5

125

126

126.5

127

127~120

128

129

129~122

130

130.5

132

133

133.5

134

135

136

137

137~125

138

139

139~127

140

141

142

143

143~135

144

145

146

147

148

150

151

152

152.5

153

153~145

153.5

154

155

156

157

158

159

160

161

162

162.5

163

164

165

165(142)

166

167

168

168.5

170

171

171~148

171~154

171~158

172

173

174

175

176

177

178

178.5

179

180

181

182

183

184

184.5

185

185 to 205

185.5

186

186(161)

186.6

187

188

189

190

191

192

193~167

193~173

193~177

193 to 183

194

195

196

196.6

197

198

199

199.5

200

202

203

205

209

210

210~198

212

213

214

215

217

217.5~337.5

218

219

220

223

225

230

230 to 250

233

235

236

237

239

240

241

242

243

245

246

246 to 236

247.3

250

250~235

251

252

255

256

257

260

260~250

262

264

265

267

270

272~392

275

275~255

275~260

280

285

287

289

290

292

293

295

300

302

304

305

306

307

308

311

312

314

315

317

318

320

325

330

350

355

358

360

365

367

370

371

374

375

378.5

380

390

394

395

420

430

450

458

470

473

475

478

480

495

500

518

520

530

580

600

618

623

630

675

710

730
Drawing

Clear

Load Range(daN)
- Up to 35.00
- 35.01 to 80.00
- 80.01 to 140.00
- 140.01 to 220.00
- 220.01 to 320.00
- 320.01 to 485.00
- 485.01 to 750.00
- 750.01 or More
Clear

Stopper
- Not Provided
- With Rotation Stopper
- With Swivel Stopper
- With Double Stopper (Rotation + Swivel)
Clear

Wheel Material
- Synthetic Rubber
- Nylon
- Urethane
- Polyurethane
- Phenol
- Engineering Plastics
- Steel
- Others
- Stainless Steel
- Rubber
- Elastomer
- Aluminum
Clear

Wheel Characteristics
- Abrasion Resistance
- Gasoline Resistant (including Light Oil)
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Low Temp. Resistance
- Antistatic
- Not Provided
- Conductivity
Details

Clear

Fitting Material
- Steel
- Stainless Steel
- Others
- Aluminum
- Steel
- Zinc
Clear

Mounting Hole Type
- Round Hole
- Slotted Hole
- Round holes (two holes)
- Round Holes (3 Holes)
Clear

Mounting Hole Pitch, Long Length Direction L1(mm)
12

14

18

19

25.4

26

28

29

30

32

36

38(48)

38.5(44)

38.5(48)

39.5(48)

40

42

43

44

45

45(60)

46

47

48

49

50

50(55)

51

52

52(62)

53

53(55)

54

54(55)

55

55(65)

56

58

59(80)

60

60(45)

60(66)

60(71)

62

63

63(78)

64

65

65(60)

66

67 (74)

67(74)

68

68 (71)

68(71)

68(73)

69

70

70(73)

70(80)

71

71(90)

72

72$68$69$70$71$73$74$67

72(82)

73

73(85)

73(87)

73.5

74

75

75$76$77$78$79$80$82$81

75(80)

75 (82)

75(82)

75(90)

76

76(80)

76(87)

76(92)

76.5(83)

77

78

78(80)

79

79(82)

80

80(84)

80(88)

80 (90)

80(90)

81

82

82(79)

83

84

85

86

87

87(93)

87 (94)

87(94)

88

89

90

90(100)

90(105)

91

91$87$88$89$90$94$92$93

93

93(103)

94

94(102)

95

95(100)

96

98(108)

100

100(112)

100(115)

101

102

103

103(113)

104

105

105(110)

105(112)

105 (115)

105(115)

105 (120)

105(120)

106

106(112)

107

107(112)

108

109

110

110(112)

111

112

112(100)

112(119)

112(120)

112 (140)

114

115

115(105)

116

120

121

122

124

125

125 (133)

125(133)

125.5(133.5)

127

128

130

133

133(148)

133(155)

134(144)

134(155)

135

135(145)

136

140

145

148

150

150(165)

152

155

160

162

163

165

166

167

168

170

172

173

174

175

180

183

184

185

192

194

215
Drawing

Clear

Mounting Hole Pitch, Short Length Direction W1(mm)
5

6

9

11

15

18

20

23

23(28)

24

25

25.4

26

27

28

29

30

32

34

35

36

38(48)

38.5(44)

38.5(48)

39.5(48)

40

40(45)

41

42

42(44)

43

44

45

45(50)

46

47

48

49

49(55)

50

50(55)

50(56)

50(58)

50 (63)

51

52

52(58)

52(62)

53

53(55)

53(56)

53(57)

54

54(64)

55

55(60)

55(63)

55(65)

56

56(50)

56(53)

56(63

57(60)

58

59

60

60(45)

60(63)

60(66)

60(71)

62

62(85)

62(85.5)

62 (86)

63

63(56)

63(78)

64

65

65(60)

67 (74)

67(74)

67(76)

68

68 (71)

68(71)

68(73)

69

70

70(73)

70(80)

71

71(90)

72

72$68$69$70$71$73$67$74

72(82)

73

75

75$76$77$78$79$80$81$82

75(80)

75 (82)

75(82)

75(85)

75(90)

76

76(64)

76.5(83)

77

78

78(80)

79

79(82)

80

80 (90)

80(90)

82(79)

85

85(104)

86

86(105)

87

87(93)

87 (94)

87(94)

90

90$94$88$87$89$91$92$93

90(100)

90(105)

94

95

100

100(12)

100(111)

100(112)

100(115)

102

104

105

105(105)

105(110)

105(112)

105 (115)

105(115)

105 (120)

105(120)

106(112)

107

110

112

112(63)

112(120)

115

115(105)

116

120

121

121(105)

122

125

128

130

133

134(144)

136

140

148

150

150(165)

151

155

160

165

167

170
Drawing

Clear

Thread Dia.
UNF1

UNF1/2

W3/4

UNC3/8

UNF3/8

W3/8

UNC5/16

M6

M8

M10

M12

M12(P1.75)

M14

M16

M20

M24
Drawing

Clear

Wheel Dia. D(mm)
13

15

15.875

18

19.05

20

22

25

25.4

30

32

35

36

37

38

39

40

41

42

45

47

48

50

51

52

54

55

57

58

60

61

61.5

62

63

64

65

68

70

72

73

74

75

76

78

80

82

84

85

90

92

98

100

100/125

101

102

105

108

117

120

124

125

125/145

126

127

130

137

138

140

150

150/175

152

153

157

160

175

180

181

185

186

197

200

200/230

203

210

218

220

225

230

245

246

247

248

250

251

253

254

257

260

280

286

290

293

294

295

300

305

306

350

360

400

405

415

420

455

460

500

520

525

536

600

620
Drawing

Clear

Mounting Hole Pitch Circular Diameter(mm)
6.3x10

28

34

35

40

48

51

53

54.5

68

80

100

144

198
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (16)
- Cost Efficient Products ()
- BLICKLE (518)
- TOKAI CASTER (72)
- TAKIGEN(HAMMER CASTER) (23)
- NANSIN (23)
- YUEI CASTER (18)
- TOSHIN CASTER (13)
- TRUSCO NAKAYAMA (11)
- TAKIGEN (8)
- UCHIMURA (7)
- SISIKU ADDKREIS (6)
- PARTS SEIKO (4)
- TOSEI SHARYO (4)
- SONRIN (2)
- HIKARI (1)
- HILOGIK (1)
- HAION (1)
- IMAO CORPORATION (1)
- MAKITECH (1)
- OKAMOTO KOKI (1)
- SUNCO (1)
- PREVOST (0)
- ORII AND MEC (0)
- YAHATA NEJI (0)
- SUEHIRO(KATSUYAMA KIKAI) (0)
- NABEYA (0)
- EASTERN SEIKO (0)
- KURASHIKI KAKO (0)
- OHINDUSTRIAL (0)
- KYOMACHI (0)
- GIFU SANKEN KOGYO (0)
- ESCO (0)
- YODONO (0)
- TOUHOKU SHARYO (0)
- SAMSONG (0)
- INOAC (0)
- ELESA (0)
- KIPP (0)
- SPACIO (0)
- BS ROLLEN (0)
- TORWEGGE (0)
Clear