Cam Followers / Hex Socket on Head / Thread / Flat Type
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Drawing
(*)
| D | Tolerance |
| 30 | 0 －0.009 |
| 32 to 47 | 0 －0.011 |
| 52 to 80 | 0 －0.013 |
| 80 to 90 | 0 －0.015 |
■With Seal
■No Seal
| Type | [M] Material | [A] Accessory | ||
| Application | With Seal | No Seal | ||
| General | CFFH | CFAH | EN 1.3505 Equiv. | Hex Nut 1 pc. (EN 1.1191 Equiv., Black Oxide) |
| CFFSH | CFASH | EN 1.4125 Equiv. | Hex Nut 1 pc. (EN 1.4301 Equiv.) | |
| Low Dust Generation | CFFCH | — | ||
| Heavy Load | CFFGH | — | EN 1.3505 Equiv. | Hex Nut 1 pc. (EN 1.1191 Equiv., Black Oxide) |
·Operating Temperature Range: −15°C to 80°C (If the temperature exceeds 80°C, plastic and rubber parts may be deformed or damaged)
Specification Table
| Part Number | — | D |
| CFFH20 | — | 52 |
| Part Number | D | M × Pitch | B | B1 | L | d1 | ℓ | ℓ1 | r | f (Min.) | H | Mass (g) | Max. Tightening Torque (N⋅m) | ||
| Type | dh7 Tolerance | (Selectable) | |||||||||||||
| (With Seal) CFFH CFFSH CFFCH CFFGH (No Seal) CFAH CFASH | 12 | 0 −0.018 | 30 | 12 × 1.5 | 14 | 15 | 40 | 3 | 14 | 6 | 1.5 | 20 | 6 | 105 (107) | 29.4 |
| 32 | 115 (117) | ||||||||||||||
| 16 | 35 | 16 × 1.5 | 18 | 19.5 | 52 | 18 | 8 | 24 | 205 (207) | 70.6 | |||||
| 18 | 40 | 18 × 1.5 | 20 | 21.5 | 58 | 20 | 26 | 295 (300) | 98 | ||||||
| 20 | 0 −0.021 | 47 | 20 × 1.5 | 24 | 25.5 | 66 | 4 | 22 | 9 | 36 | 8 | 450 (455) | 137 | ||
| 52 | 525 (530) | ||||||||||||||
| 24 | 62 | 24 × 1.5 | 29 | 30.5 | 80 | 25 | 11 | 40 | 915 (925) | 245※ | |||||
| 72 | 1150 (1160) | ||||||||||||||
| 30 | 80 | 30 × 1.5 | 35 | 37 | 100 | 32 | 15 | 2 | 46 | 1880 (1890) | 480※ | ||||
| 85 | 1950 (1960) | ||||||||||||||
| 90 | 2000 (2010) | ||||||||||||||
[ ! ] ( ) is the weight of Heavy Load Type.
[ ! ] 1 N⋅m = 0.102 kgf·m.
Part Number Substitution Table for Cam Follower Standard Changes (D30 to 40, 52 only)| Type | Old Part Number (D30 to 40, 52 only) | New Part Number | ||
| Old Standard | Old Hex Socket Type | Old Threaded Section With Hex Socket | Head and Thread With Hex Socket | |
| Cam Followers | CFUR | CFUA | CFUB | CFUH |
| CFURS | CFUAS | — | CFUSH | |
| CFURC | CFUAC | — | CFUCH | |
| — | CFUAG | — | CFUGH | |
| CFU | CUA | — | CUH | |
| CFUS | CUAS | — | CUSH | |
| CFFR | CFFA | CFFB | CFFH | |
| CFFRS | CFFAS | — | CFFSH | |
| CFFRC | CFFAC | — | CFFCH | |
| — | CFFAG | — | CFFGH | |
| CFR | CFA | — | CFAH | |
| CFRS | CFAS | — | CFASH | |
Table 1: Reference Data of Cam Followers| d-D | General | Heavy Load | |||||||||||||
| Basic Dynamic Load Rating Load C (kN) | Basic Static Load Rating Load Cor (kN) | Max. Allowable Load (kN) | Track Load Capacity (kN) | Max. Rotational Speed (rpm) | Mass (g) | Basic Dynamic Load Rating Load C (kN) | Basic Static Load Rating Load Cor (kN) | Max. Allowable Load (kN) | Track Load Capacity (kN) | Max. Rotational Speed With Seal (rpm) | Mass (g) | ||||
| With Seal | No Seal | ||||||||||||||
| Crowned | Flat | Crowned | Flat | ||||||||||||
| 3−10 | 1.47 | 1.18 | 0.36 | 0.37 | 1.37 | 32900 | 47000 | 4.5 | — | — | — | — | — | — | — |
| 4−12 | 2.06 | 2.05 | 0.78 | 0.47 | 1.76 | 25900 | 37000 | 7.5 | — | — | — | — | — | — | — |
| 5−13 | 3.14 | 2.77 | 1.42 | 0.53 | 2.25 | 20300 | 29000 | 10.5 | — | — | — | — | — | — | — |
| 6−16 | 3.59 | 3.58 | 2.11 | 1.08 | 3.43 | 17500 | 25000 | 18.5 | 6.94 | 8.5 | 2.11 | 1.08 | 3.43 | 7700 | 19 |
| 8−19 | 4.17 | 4.65 | 4.73 | 1.37 | 4.02 | 14000 | 20000 | 28.5 | 8.13 | 11.2 | 4.73 | 1.37 | 4.02 | 6090 | 29 |
| 10−22 | 5.33 | 6.78 | 5.81 | 1.67 | 4.7 | 11900 | 17000 | 45 | 9.42 | 14.3 | 5.81 | 1.67 | 4.7 | 5040 | 46 |
| 10−26 | 2.06 | 5.49 | 60 | 2.06 | 5.49 | 61 | |||||||||
| 12−30 | 7.87 | 9.79 | 9.37 | 2.45 | 7.06 | 9800 | 14000 | 105 | 13.4 | 19.8 | 9.37 | 2.45 | 7.06 | 4060 | 107 |
| 12−32 | 2.74 | 7.45 | 115 | 2.74 | 7.45 | 117 | |||||||||
| 16−35 | 12 | 18.3 | 17.3 | 3.14 | 11.2 | 7000 | 10000 | 205 | 20.6 | 37.6 | 17.3 | 3.14 | 11.2 | 3150 | 207 |
| 18−40 | 14.7 | 25.2 | 26.1 | 3.72 | 14.4 | 5950 | 8500 | 295 | 25.2 | 51.3 | 26.1 | 3.72 | 14.4 | 2660 | 300 |
| 20-47 | 20.7 | 34.8 | 32.1 | 7.15 | 21 | 4900 | 7000 | 450 | 33.2 | 64.8 | 32.1 | 7.15 | 21 | 2380 | 455 |
| 20−52 | 8.23 | 23.2 | 525 | 8.23 | 23.2 | 530 | |||||||||
| 24-62 | 30.6 | 53.2 | 49.5 | 10.5 | 34.2 | 4550 | 6500 | 915 | 46.7 | 92.9 | 49.5 | 10.5 | 34.2 | 2030 | 925 |
| 24-72 | 12.9 | 39.8 | 1150 | 12.9 | 39.8 | 1160 | |||||||||
| 30-80 | 45.4 | 87.6 | 73.7 | 14.9 | 52.6 | 3500 | 5000 | 1880 | 67.6 | 145 | 73.7 | 14.9 | 52.6 | 1610 | 1890 |
| 30-85 | 16.1 | 56 | 1950 | 16.1 | 56 | 1960 | |||||||||
| 30-90 | 17.3 | 59.3 | 2000 | 17.3 | 59.3 | 2010 | |||||||||
Cautions / Prohibitions
- ·Dropping or hitting may damage the product.
- ·Please note that when shock was applied, the product may lose its function even though there is no visible damage outside.
- ·Cam Followers can bear radial load, but they are not designed to support thrust load. Please avoid using them to bear thrust load.
- ·Some types are not filled with grease depending on the size.
See the table below and lubricate the ones not filled with the grease before using them.
| General Purpose Grease Filled (AFB-LF Grease) | Low Dust Generation Grease Filled (AFE-CA Grease) | ||
| Grease Performance | Thickener | Lithium Soap | Urea Inductor |
| Base Oil | Refined Mineral Oil | Synthetic Oil | |
| Base Oil Dynamic Viscosity (40°C, mm2/s) | 170 | 100 | |
| Worked Penetration (25°C ·60W) | 275 | 260 | |
| Dropping Point (°C) | 193 | 258 | |
| Evaporation Amount: wt% (99°C, 22 h) | 0.36 | 0.1 | |
| Oil Separation: wt% (100°C, 24 h) | 0.6 | 0.8 | |
| Operating Temperature (°C) | In Air | −15 to +100 | −40 to +160 |
| In Vacuum | Unsuitable | Unsuitable | |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Characteristics/Applications | O.D. D (φ) | Width B (mm) | Material | Basic Load Rating Cr (Dynamic) (kN) | Basic Load Rating Cor (Static) (kN) | Allowable Rotational Speed (1/min) | Seals | Application | Cam Follower Stud Thread (Fine) (mm) | Rolling Guide Method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34.64 € | 1 | Available | 5 Days | 10 | Corrosion Resistant / Chemical Resistant / Heat Resistance | 30 | 14 | [Stainless Steel] EN 1.4125 Equiv. | 7.87 | 9.79 | 9800 | Not Provided | General | M12×1.5 | With Retainer | |
36.02 € | 1 | Available | 5 Days | 10 | Corrosion Resistant / Chemical Resistant / Heat Resistance | 32 | 14 | [Stainless Steel] EN 1.4125 Equiv. | 7.87 | 9.79 | 9800 | Not Provided | General | M12×1.5 | With Retainer | |
60.61 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 35 | 18 | [Stainless Steel] EN 1.4125 Equiv. | 12 | 18.3 | 10000 | Not Provided | General | M16×1.5 | With Retainer | |
71.94 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 40 | 20 | [Stainless Steel] EN 1.4125 Equiv. | 14.7 | 25.2 | 8500 | Not Provided | General | M18×1.5 | With Retainer | |
91.72 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 47 | 24 | [Stainless Steel] EN 1.4125 Equiv. | 20.7 | 34.8 | 7000 | Not Provided | General | M20×1.5 | With Retainer | |
96.37 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 52 | 24 | [Stainless Steel] EN 1.4125 Equiv. | 20.7 | 34.8 | 7000 | Not Provided | General | M20×1.5 | With Retainer | |
99.89 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 62 | 29 | [Stainless Steel] EN 1.4125 Equiv. | 30.6 | 53.2 | 6500 | Not Provided | General | M24×1.5 | With Retainer | |
112.16 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 72 | 29 | [Stainless Steel] EN 1.4125 Equiv. | 30.6 | 53.2 | 6500 | Not Provided | General | M24×1.5 | With Retainer | |
141.42 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 80 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Not Provided | General | M30×1.5 | With Retainer | |
160.30 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 85 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Not Provided | General | M30×1.5 | With Retainer | |
171.67 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 90 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Not Provided | General | M30×1.5 | With Retainer | |
48.86 € | 1 | Available | 5 Days | 10 | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 30 | 14 | [Stainless Steel] EN 1.4125 Equiv. | 7.87 | 9.79 | 9800 | Provided | Low Dust Generation | M12×1.5 | With Retainer | |
50.76 € | 1 | Available | 5 Days | 10 | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 32 | 14 | [Stainless Steel] EN 1.4125 Equiv. | 7.87 | 9.79 | 9800 | Provided | Low Dust Generation | M12×1.5 | With Retainer | |
82.24 € | 1 | Available | 5 Days | 10 | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 35 | 18 | [Stainless Steel] EN 1.4125 Equiv. | 12 | 18.3 | 7000 | Provided | Low Dust Generation | M16×1.5 | With Retainer | |
109.78 € | 1 | Available | 7 Days | - | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 40 | 20 | [Stainless Steel] EN 1.4125 Equiv. | 14.7 | 25.2 | 5950 | Provided | Low Dust Generation | M18×1.5 | With Retainer | |
106.92 € | 1 | Available | 7 Days | - | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 47 | 24 | [Stainless Steel] EN 1.4125 Equiv. | 20.7 | 34.8 | 4900 | Provided | Low Dust Generation | M20×1.5 | With Retainer | |
111.18 € | 1 | Available | 7 Days | - | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 52 | 24 | [Stainless Steel] EN 1.4125 Equiv. | 20.7 | 34.8 | 4900 | Provided | Low Dust Generation | M20×1.5 | With Retainer | |
180.09 € | 1 | Available | 7 Days | - | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 62 | 29 | [Stainless Steel] EN 1.4125 Equiv. | 30.6 | 53.2 | 4550 | Provided | Low Dust Generation | M24×1.5 | With Retainer | |
195.21 € | 1 | Available | 7 Days | - | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 72 | 29 | [Stainless Steel] EN 1.4125 Equiv. | 30.6 | 53.2 | 4550 | Provided | Low Dust Generation | M24×1.5 | With Retainer | |
205.19 € | 1 | Available | 7 Days | - | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 80 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Provided | Low Dust Generation | M30×1.5 | With Retainer | |
259.70 € | 1 | Available | 7 Days | - | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 85 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Provided | Low Dust Generation | M30×1.5 | With Retainer | |
288.73 € | 1 | Available | 7 Days | - | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | 90 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Provided | Low Dust Generation | M30×1.5 | With Retainer | |
39.42 € | 1 | Available |
Same day
Stock | 10 | Corrosion Resistant / Chemical Resistant / Heat Resistance | 30 | 14 | [Stainless Steel] EN 1.4125 Equiv. | 7.87 | 9.79 | 9800 | Provided | General | M12×1.5 | With Retainer | |
40.93 € | 1 | Available |
Same day
Stock | 10 | Corrosion Resistant / Chemical Resistant / Heat Resistance | 32 | 14 | [Stainless Steel] EN 1.4125 Equiv. | 7.87 | 9.79 | 9800 | Provided | General | M12×1.5 | With Retainer | |
64.98 € | 1 | Available |
Same day
Stock | 10 | Corrosion Resistant / Chemical Resistant / Heat Resistance | 35 | 18 | [Stainless Steel] EN 1.4125 Equiv. | 12 | 18.3 | 7000 | Provided | General | M16×1.5 | With Retainer | |
78.08 € | 1 | Available | 5 Days | 10 | Corrosion Resistant / Chemical Resistant / Heat Resistance | 40 | 20 | [Stainless Steel] EN 1.4125 Equiv. | 14.7 | 25.2 | 5950 | Provided | General | M18×1.5 | With Retainer | |
85.38 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 47 | 24 | [Stainless Steel] EN 1.4125 Equiv. | 20.7 | 34.8 | 4900 | Provided | General | M20×1.5 | With Retainer | |
103.91 € | 1 | Available | 5 Days | 10 | Corrosion Resistant / Chemical Resistant / Heat Resistance | 52 | 24 | [Stainless Steel] EN 1.4125 Equiv. | 20.7 | 34.8 | 4900 | Provided | General | M20×1.5 | With Retainer | |
146.16 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 62 | 29 | [Stainless Steel] EN 1.4125 Equiv. | 30.6 | 53.2 | 4550 | Provided | General | M24×1.5 | With Retainer | |
167.91 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 72 | 29 | [Stainless Steel] EN 1.4125 Equiv. | 30.6 | 53.2 | 4550 | Provided | General | M24×1.5 | With Retainer | |
205.59 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 80 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Provided | General | M30×1.5 | With Retainer | |
237.63 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 85 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Provided | General | M30×1.5 | With Retainer | |
264.12 € | 1 | Available | 7 Days | - | Corrosion Resistant / Chemical Resistant / Heat Resistance | 90 | 35 | [Stainless Steel] EN 1.4125 Equiv. | 45.4 | 87.6 | 3500 | Provided | General | M30×1.5 | With Retainer |
Loading...
Basic information
| Classification | Cam Followers | Environmentally friendly | RoHS Compliant (10 Substances) | Roller Type | Flat Type |
|---|---|---|---|---|---|
| Fastening Methods | Hex Socket on Head Thread | Roller Outer Circumference | Not Provided | Cam Follower Mounting Shaft Position | Standard |
| Cam Follower Additional Function | None | Cam Follower Lubrication Method | None | Size Standard | Metric Series |
| Shaft | Provided |
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Characteristics/Applications
-
O.D. D(φ)
-
Width B(mm)
-
Allowable Rotational Speed(1/min)
-
Seals
- Not Provided
- Provided
-
Application
- General
- Heavy Load
- Low Dust Generation
-
Cam Follower Stud Thread (Fine)(mm)
- M12×1.5
- M16×1.5
- M18×1.5
- M20×1.5
- M24×1.5
- M30×1.5
-
Rolling Guide Method
- Full Roller
- With Retainer
-
Type
- CFAH
- CFASH
- CFFCH
- CFFGH
- CFFH
- CFFSH
-
Material
- Carbon steel
- Stainless Steel
- Carbon steel
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 5 Days or Less
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.