Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Tool Sets / Tool Boxes（Page 12）

528

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Handle for Tool Case XXL III

WIHA

Application: The handle allows the users to carry the tool case to every type of work location.

Spare handle for the tool case XXL III from Wiha. The handle can be applied at the side of the extendable handle, as well as on the front side. Contains 1.

Select to compare

Configure now
Starting from^∗ ：	48.95 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Lid for Tool Case XXL III

WIHA

Application: For secure locking of the tool case XXL III.

Spare lid for the tool case XXL III with pre-installed locks including hinge joints for the secure installation to the body of the case. Contains 1.

Select to compare

Configure now
Starting from^∗ ：	130.49 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Rear Connector for Tool Case XXL III

WIHA

Application: For attaching the dividers in the bottom compartment of the tool case XXL III.

Spare connector for attaching the dividers in the rear area of the bottom compartment of the tool case XXL III from Wiha. Contains 1.

Select to compare

Configure now
Starting from^∗ ：	32.63 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Rubber Tips on the Body of Tool Case XXL III

WIHA

Application: When the case is placed lying down, the rubber tips balance out the height difference between the raised back wheel and the front. In this position, the case is lying horizontally.

Replacement rubber tips for the body of the tool case XXL III. Contains 2.

Select to compare

Configure now
Starting from^∗ ：	40.79 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Rubber Tips on the Legs of Tool Case XXL III

WIHA

Application: Anti-skid rubber tips for the optimal support of the case in an upright position.

Spare rubber tips (two left and two right) for the stand legs of the tool case XXL III. Contains 4.

Select to compare

Configure now
Starting from^∗ ：	24.47 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

slimBit Box, Empty

WIHA

Makes handling easier: Compact slimBit box with easy access and an optimal view of profiles.

Application: Combined with speedE® or slimVario® handles and slimBits to fasten deep-set screws. For working on live parts up to 1,000 V AC.

The slimBit box is the perfect solution for an orderly and easy-to-use storage of 6 slimBits. The ingenious bit box provides an optimum view of screw profiles.

The 6 mm slimBits can only be used with speedE®, slimVario® or TorqueVario®-S electric tools.

Tested according to IEC 60900.

Select to compare

Configure now
Starting from^∗ ：	4.11 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

slimBit Box, Empty, 2 Pieces with Belt Clip

WIHA

Makes handling easier: Compact slimBit box with easy access and an optimal view of profiles.

Makes handling easier: Convenient safe storage of 12 slimBits – easily taken directly from the belt.

Application: Combined with speedE® or slimVario® handles and slimBits to fasten deep-set screws. For working on live parts up to 1,000 V AC.

The set with slimBit boxes is the perfect solution for neat, easy-to-use storage of 12 slimBits. The ingenious bit box provides an optimum view of screw profiles. Thanks to the supplied belt clip, the slimBit boxes are the perfect companion while out on jobs.

The 6 mm slimBits can only be used with speedE®, slimVario® or TorqueVario®-S electric tools.

Tested according to IEC 60900.

Select to compare

Configure now
Starting from^∗ ：	12.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Stand Leg Joint Cover for Tool Case XXL III

WIHA

Application: For covering the joints of the legs of tool case XXL III. The cover protects the joints of the legs from damage and dirt.

Spare cover for the joint of the stand legs of the tool case XXL III from Wiha. Suitable for all 4 legs. Contains 2.

Select to compare

Configure now
Starting from^∗ ：	16.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Backpack Mechanic, 41 Pieces

WIHA

Application: The backpack is ideally suited for mobile application and offers maximum freedom for the hands and work location.

When you have your hands full of work, you need two free hands. The professional backpack from Wiha is the perfect solution and allows limitless freedom with its protected design. The sophisticated compartment system ensures clearly structured organization and easy removal of the tools. When the backpack is open 1/3 it additionally offers practical quick access options. The total of 77 storage and 30 flexible attachment possibilities allow individualised configuration options with additional tools and accessories. The robust base tray of the backpack with its stable foothold makes sure that the backpack has a firm stand when open. In addition, it comes in handy in wet and dirty work environments thanks to its robust material. Moreover, the tool backpack is not only your workshop on the go but also a mobile office. A laptop and office compartment allows the secure and clean storage of your laptop, cell phone and documents, separate from the tools.
Comfortable carrying is ensured by the adjustable breathable carrying elements as well as robust non-slip handle. It fulfills highest quality demands thanks to its high-quality surface material 1680D and YKK zippers. For private or sensitive objects there is room in several separate padded compartments.
For all types of fastening work, the backpack not only contains our ten-part L-key set and 14-part bit set, but also seven ergonomic screwdrivers and the small compact Stubby. All holding, feeding and cutting tasks can be carried out with the combination and water pump pliers as well as the heavy-duty diagonal cutter. The Wiha locksmith hammer, the measuring tape and five ring ratchet open ended spanners complete the mobile tool range for professionals.
Finally, the backpack can be expanded individually thanks to the universal MOLLE system. The handy loops can be equipped with plenty of accessories found online for enhancing and expanding the backpack (not included in the delivery). With the professional tool backpack and its mobile set of high quality Wiha tools you always have everything you need by your side!

Content:

1x Screwdriver SoftFinish® Slotted with one-piece hexagonal blade and solid steel cap 12.0 mm x 200 mm (03231)
1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 3.5 mm x 100 mm (00691)
1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 4.5 mm x 125 mm (00697)
1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 5.5 mm x 150 mm (00700)
1x Screwdriver SoftFinish® Slotted with round blade 6.5 mm x 150 mm (00703)
1x Screwdriver SoftFinish® Phillips with round blade PH1 x 80 mm (00756)
1x Screwdriver SoftFinish® Phillips with round blade PH2 x 100 mm (00759)
1x Screwdriver with bit holder magnetic Stubby, 1/4" 57 mm (29463)
1x Bit set FlipSelector Standard 25 mm assorted 14-pcs. 1/4" C6,3 (39078)
1x Engineer's hammer
1x Heavy-duty diagonal cutters Industrial with DynamicJoint® with switchable opening spring 180 mm, 7" (41272)
1x Combination pliers Industrial with DynamicJoint® and OptiGrip with extra long cutting edge 200 mm, 8" (32319)
1x Water pump pliers Industrial box type 250 mm (32342)
1x L-key set in ProStar holder Hexagonal ball end matt chrome-plated 10-pcs. (07185)
1x Ring ratchet open-end spanner 8 mm x 8 mm (44638)
1x Ring ratchet open-end spanner 10 mm x 10 mm (44640)
1x Ring ratchet open-end spanner 13 mm x 13 mm (44654)
1x Ring ratchet open-end spanner 17 mm x 17 mm (44658)
1x Ring ratchet open-end spanner 19 mm x 19 mm (44660)
1x Measuring tape 5 m With belt clip (33251)

Select to compare

Configure now
Starting from^∗ ：	426.67 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Case Basic Set L Electric, 18 Pieces

WIHA

Dimensions: Internal: 42 x 30 x 16 cm / External: 45,7 x 36,7 x 18,3 cm

Application: The basic kit for electricians out on jobs, e.g. ideal for young workers starting their career.

Application: Suitable for working in the presence of live parts up to 1,000 V AC.

Material: Polypropylene

In mobile use, it is not easy to carry all the necessary tools while keeping order. With the tool case basic, the mobile electrician has a convincing equipment and does not lose track of things. For the ideal basic equipment, the handy tool case is equipped with a range of high-quality hand tools, of which the majority offer additional safety when working on live parts due to their VDE-certified insulation. In addition, the case offers ample space for further individual additional equipment thanks to extra loops and storage space. The polypropylene case guarantees robustness and can be secured against theft with padlocks at the integrated eyelets (these are not included in the scope of delivery). The ergonomic two-component handle ensures a comfortable carrying experience. The tool case basic is also ideally suited for flights thanks to the air pressure compensation valve and can be clearly assigned to the owner with the existing, self-labelled name plate. Certified to protection class IP 67, the Wiha tool case is dust- and waterproof. With its 20 L capacity and a permissible load-bearing capacity of up to 14.2 kg, it is prepared for a wide range of operating conditions.

Content:

1x Industrial electric needle nose pliers with cutting edge straight shape 200 mm, 8" (33178)
1x Industrial electric diagonal cutters with DynamicJoint® 160 mm, 6 1/2" (43336)
1x Industrial electric combination pliers with DynamicJoint® and OptiGrip with extra long cutting edge 180 mm, 7" (33186)
1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
1x Screwdriver SoftFinish® electric slimFix Slotted 4.0 mm x 100 mm (35390)
1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
1x Screwdriver SoftFinish® electric slimFix Phillips PH1 x 80 mm (35393)
1x Screwdriver SoftFinish® electric slimFix Phillips PH2 x 100 mm (35394)
1x Screwdriver SoftFinish® electric slimFix PlusMinus/Pozidriv SL/PZ2 x 100 mm (36330)
1x Electrician's Longlife® folding ruler, 2 m metric, 10 segments 15 mm (42068)
1x Screwdriver with bit magazine PocketMax® electric mixed with 4 slimBits (45296)
1x Electrician's spirit level 40 cm (42074)
1x Stripping multi-tool for round cables 125 mm, 5" (44242)
1x case

Select to compare

Configure now
Starting from^∗ ：	374.64 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Case XXL III, Empty

WIHA

Protects your health: On stairs and rough terrain the trolley moves comfortably and smoothly thanks to its large wheels.

Simplifies your work: When the legs are folded out, the case serves as a stable and slip-proof step for working on higher locations.

Increases the quality of your work: Exact sawing of material at the construction site thanks to a V-shaped incision with a scale in the lid of the case.

Protects your health: Elevated positon for removing tools from the case due to the extendable legs.

Dimensions: 68.5 x 50.1 x 34.5 cm

Application: For the structured and organized storage of an extensive tool range.

Application: For the quick and easy transportation of tools.

Electricians require a great variety of tools at different locations. Many tool cases do not provide sufficient stability and fitting all required tools in an organized way often requires great effort. As opposed to this, the tool case XXL III from Wiha offers enough storage space coupled with absolute robustness. In addition, it contains especially developed tool storage compartments that offer enough space for the neat storage of a comprehensive tool assortment. Thanks to its extra large wheels it is very easy to conveniently pull the case along on rugged terrain or stairs. The legs can be folded out, turning the case into a slip-proof step. In addition, the raised position allows the comfortable and strain-free removal of the tools. The V-shaped incision with a scale in the lid of the case facilitates the sawing of materials, such as cable ducts, at the construction site. Made of robust polypropylene, the case also features gas-filled shock absorbers, which hold the lid in different positions, preventing it from closing accidentally and smashing fingers.

Select to compare

Configure now
Starting from^∗ ：	758.39 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Panel Lock for Tool Case XXL III

WIHA

Application: Locking the tool panel ensures the safe storage of the tools in the storage compartment at the bottom of the case.

Spare lock for the lowest tool panel of the tool case XXL III from Wiha. Contains 2.

Select to compare

Configure now
Starting from^∗ ：	32.63 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Electrician Competence XL, Assorted 81 Pieces in Case

WIHA

Meets your requirements: Case: robust, large, stable and secure with lid brake.

Lowers your costs: The right tool protects you from damaging materials and avoids subsequent work.

Increases your safety: Internationally award-winning VDE-insulated tools, each individually tested at 10,000 V AC and approved for use at 1,000 V AC.

Increases your safety: Gas-filled shock absorbers hold the lid in all positions and reduce the risk of injury when closing.

Protects your health: Wiha pliers require less force and reduce pressure on wrists. Ergonomic handle design makes work easier and prevents occupational illnesses.

Protects your health: Carry belt enables the simple transport of the tool case and keeps hands free for other materials.

Increases your efficiency: A comprehensive tool assortment, always having the right tool at hand when needed.

Increases your efficiency: The design and function of the tool trays guarantee quick and easy access to tools.

Increases your flexibility: Ample space for additional tools and lots of storage for small parts and machines.

Application: Suitable for working in the presence of live parts up to 1,000 V AC. The complete kit for professional electricians out on jobs.

Supplementary information: Manufactured acc. to IEC 60900.

The tool inserts in the electrician's 83-piece XL Competence Case are designed to help you work efficiently by ensuring that all tools are quickly and easily accessible. Thanks to an extensive kit, electricians have the right device for every application, such as the LiftUp electric magazine bit holder, fully insulated screwdrivers from the Wiha Slim line or TriCut installation pliers. The large storage space in the toolbox also offers ample space for more small parts and other equipment. Made of robust polypropylene, the cases also feature gas-filled shock absorbers, which hold the lid in different positions, preventing it from closing automatically. The chances of fingers getting caught or other injuries are minimised as a result.

Content:

1x Screwdriver SoftFinish® electric Hex nut driver 5.5 mm x 125 mm (00856)
1x Screwdriver SoftFinish® electric Hex nut driver 7.0 mm x 125 mm (00858)
1x Screwdriver SoftFinish® electric Hex nut driver 8.0 mm x 125 mm (00859)
1x Screwdriver SoftFinish® electric Hex nut driver 10.0 mm x 125 mm (00861)
1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
1x Screwdriver SoftFinish® electric slimFix Slotted 6.5 mm x 150 mm (35392)
1x Screwdriver SoftFinish® electric slimFix PlusMinus/Phillips SL/PH1 x 80 mm (35502)
1x Screwdriver SoftFinish® electric slimFix electric PlusMinus/Phillips SL/PH2 x 100 mm (35503)
1x Screwdriver SoftFinish® electric slimFix PlusMinus/Pozidriv SL/PZ1 x 80 mm (36329)
1x Screwdriver SoftFinish® electric slimFix PlusMinus/Pozidriv SL/PZ2 x 100 mm (36330)
1x Screwdriver SoftFinish® electric slimFix Phillips PH1 x 80 mm (35393)
1x Screwdriver SoftFinish® electric slimFix Phillips PH2 x 100 mm (35394)
1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ1 x 80 mm (35395)
1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ2 x 100 mm (35396)
1x Screwdriver SoftFinish® Slotted with one-piece hexagonal blade and solid steel cap 12.0 mm x 200 mm (03231)
1x Switch cabinet key cross shape 7.0 mm- 9- 5 - 8- 3 - 5 (36114)
1x Screwdriver with bit magazine LiftUp electric Phillips, PlusMinus/Pozidriv, slotted with 6 slimBits (38611)
1x L-key set in Compact holder Hexagonal ball end matt chrome-plated 10-pcs. (01418)
1x Bit set XLSelector Standard 25 mm assorted 32-pcs. 1/4" C6,3 (29417)
1x High-performance diagonal cutters BiCut® Professional with DynamicJoint® Switchable 200 mm, 8" (38191)
1x Precision mechanic's diagonal cutters Classic with opening spring 125 mm, 5" (36189)
1x Professional electric diagonal cutters with DynamicJoint® 180 mm, 7" (43340)
1x Water pump pliers Professional electric with push button adjustment 250 mm (37450)
1x Needle nose pliers Professional electric with cutting edge curved shape, approx. 40° 200 mm, 8" (26729)
1x Combination pliers Professional electric with DynamicJoint® and OptiGrip with extra long cutting edge 180 mm, 7" (26708)
1x Needle nose pliers Professional electric with cutting edge straight shape 200 mm, 8" (26727)
1x Installation pliers TriCut Professional electric 170 mm, 7" (38552)
1x Automatic stripping tool up to 6 mm² 190 mm, 7 1/2" (44617)
1x Stripping tool with self-rotating drag blade for round cables 165 mm (44618)
1x Crimping tools for wire-end sleeves 220 mm, 0.14 - 16 (33844)
1x Single-pole, non-contact volt detector, 90–1,000 VAC Includes two AAA batteries (43798)
1x Voltage tester SoftFinish® single-pole, 110-250 volts Slotted transparent, with push-on clip 3.0 mm (34745)
1x Folding ruler Longlife 2 m metric, 10 segments 15 mm (27057)
1x Control cabinet spirit level 20 cm (36859)
1x case

Select to compare

Configure now
Starting from^∗ ：	862.83 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Tool Set Electrician, Mixed 13 Pieces in Tool Pouch

WIHA

Meets your requirements: Carefully selected tool ranges for the most common applications.

Increases your efficiency: Compact and space-saving tool range.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Increases your safety: Internationally award-winning VDE-insulated tools, each individually tested at 10,000 V AC and approved for use at 1,000 V AC.

Application: Suitable for working in the presence of live parts up to 1,000 V AC. The complete kit for professional electricians out on jobs.

Supplementary information: Manufactured acc. to IEC 60900.

This 13-pc. tool set contains selected hand tools for the most common applications for electricians. Featuring a zip, carrying handle and pockets for hand tools, the fully folding tool bag provides plenty of storage space and an orderly arrangement. The insulated SoftFinish® electric slimFix screwdrivers easily reach even low-lying screws and spring elements thanks to their very slim blades. The tool bag also contains a cable cutter, needle nose pliers and heavy-duty diagonal cutters with DynamicJoint® technology for optimum hand force transmission. Other tools specially designed for an electrician's task field make the tool set complete.

Content:

1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
1x Screwdriver SoftFinish® electric slimFix Slotted 4.5 mm x 125 mm (35501)
1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ1 x 80 mm (35395)
1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ2 x 100 mm (35396)
1x Cable cutter Professional electric with switchable opening spring 210 mm, 8 1/4" (43662)
1x Needle nose pliers Professional electric with cutting edge straight shape 200 mm, 8" (26727)
1x Heavy-duty diagonal cutters Professional electric with DynamicJoint® with switchable opening spring 180 mm, 7" (41274)
1x Automatic stripping tool up to 6 mm² 190 mm, 7 1/2" (44617)
1x Stripping tool with self-rotating drag blade for round cables 165 mm (44618)
1x Voltage tester SoftFinish® single-pole, 110-250 volts Slotted transparent, with push-on clip 3.0 mm (34745)
1x Folding ruler LongLife Plus 2 m metric, 10 segments 15 mm (27059)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	211.81 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Latch for Tool Case XXL III

WIHA

Application: For locking the tool case XXL III.

Spare latches for the tool case XXL III. Contains 2.

Select to compare

Configure now
Starting from^∗ ：	48.95 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Legs for Tool Case XXL III (Extendable Handle Side)

WIHA

Application: Due to the elevated position, the foldable legs allow the comfortable and strain-free removal of the tools by the user. This also allows the case to serve as a stable and slip-proof step for working on higher locations.

Spare legs for the tool case XXL III. The set contains 1 spare leg incl. connection element. Only suitable for the legs on the side of the extendable handle of the tool case XXL III. Contains 1 unit.

Select to compare

Configure now
Starting from^∗ ：	122.35 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Electrician, Mixed 18 Pieces in Belt Pouch

WIHA

Simplifies your work: Free hands and no damage to work trousers thanks to pouch attached to belt.

Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.

Increases your safety: Internationally award-winning VDE-insulated tools, each individually tested at 10,000 V AC and approved for use at 1,000 V AC.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Increases your efficiency: All main tools quickly available, always at hand.

Dimensions: 28 x 25 x 8 cm

Application: Basic tool equipment for demanding applications in the electric sector.
For working on live parts up to 1,000 V AC.

Supplementary information: Manufactured acc. to IEC 60900.

Not having the suitable tool at hand when needed is an unnecessary waste of time, especially when you are on the go. The 18-part tool set for electricians in its handy belt pouch provides and keeps all tools required for electrical applications within reach for constant access. At the same time, users have both hands free for working. The contents of the tool set consist of a wide range of essential and practical hand tools for electricians. These include the PicoFinish® electric fine screwdriver, the SoftFinish® electric slim Fix screwdrivers, the Wiha flashlight, and the TriCut installation pliers. What is more, the handy belt pouch offers room for additional utensils and can be quickly and easily attached to the belt.

Content:

1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
1x Screwdriver SoftFinish® electric slimFix Slotted 4.0 mm x 100 mm (35390)
1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ1 x 80 mm (35395)
1x Screwdriver SoftFinish® electric slimFix PlusMinus/Pozidriv SL/PZ2 x 100 mm (36330)
1x Screwdriver SoftFinish® electric slimFix TORX® T10 x 100 mm (36536)
1x PicoFinish® electric fine screwdriver Slotted 1.5 mm x 50 mm (42374)
1x PicoFinish® electric fine screwdriver Slotted 2.5 mm x 65 mm (42376)
1x PicoFinish® electric fine screwdriver Phillips PH00 x 50 mm (42379)
1x PicoFinish® electric fine screwdriver Phillips PH0 x 65 mm (42378)
1x Needle nose pliers Professional electric with cutting edge straight shape 200 mm, 8" (26727)
1x Installation pliers TriCut Professional electric 170 mm, 7" (38552)
1x Professional electric diagonal cutters with DynamicJoint® 140 mm, 5 1/2" (43326)
1x Electrician's Longlife® folding ruler, 2 m metric, 10 segments 15 mm (42068)
1x Flashlight with LED, laser and UV light including 3 AAA batteries 100 - 310 lm (41286)
1x Voltage tester SoftFinish® single-pole, 110-250 volts Slotted transparent, with push-on clip 3.0 mm (34745)
1x Measuring tape 5 m With belt clip (33251)
1x Tool Belt Pouch

Select to compare

Configure now
Starting from^∗ ：	230.52 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Electrician, Mixed 32 Pieces in Tool Pouch

WIHA

Meets your requirements: Carefully selected tool ranges for the most common applications.

Increases your efficiency: Compact and space-saving tool range.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.

Increases your safety: Internationally award-winning VDE-insulated tools, each individually tested at 10,000 V AC and approved for use at 1,000 V AC.

Application: Suitable for working in the presence of live parts up to 1,000 V AC. The complete kit for professional electricians out on jobs.

Content:

1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
1x Screwdriver SoftFinish® electric slimFix Phillips PH1 x 80 mm (35393)
1x Screwdriver SoftFinish® electric slimFix Phillips PH2 x 100 mm (35394)
1x Professional electric diagonal cutters with DynamicJoint® 160 mm, 6 1/2" (43335)
1x Screwdriver with bit magazine magnetic assorted with 8 bits, 1/4" (32901)
1x Bit set FlipSelector Standard 25 mm Phillips, Pozidriv, TORX®, 14-pcs., 1/4" C6,3 (39040)
1x Combination pliers Professional electric with DynamicJoint® and OptiGrip with extra long cutting edge 180 mm, 7" (26708)
1x Automatic stripping tool up to 6 mm² 190 mm, 7 1/2" (44617)
1x Voltage tester SoftFinish® single-pole, 110-250 volts Slotted transparent, with push-on clip 3.0 mm (34745)
1x Folding ruler Longlife 2 m metric, 10 segments 15 mm (27057)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	215.87 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Electrician, Screwdriver, Diagonal Cutters, 7 Pieces in Tool Pouch

WIHA

Increases your efficiency: Compact and space-saving tool range.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Design: VDE tools with insulation up to 1,000 V AC, GS tested.

Design: Pocket size approx. 31 x 24 x 4 cm.

Design: High quality tools in a practical toolbag.

Design: Individually tested for electrical safety in accordance with IEC 60900:2012.

Supplementary information: Manufactured acc. to IEC 60900.

The 7-pc. tool set provides the basic kit for the most common applications for electricians. Featuring a zip, carrying handle and pockets for hand tools, the fully folding tool bag provides plenty of storage space and an orderly arrangement. The insulated SoftFinish® electric slimFix screwdrivers easily reach even low-lying screws and spring elements thanks to their very slim blades. Also insulated, the heavy-duty diagonal cutters with DynamicJoint® technology, a unique joint design for optimum hand force transmission, complete the equipment assortment in this tool bag.

Content:

1x Screwdriver SoftFinish® electric Slotted 3.5 mm x 100 mm (00822)
1x Screwdriver SoftFinish® electric Slotted 4.5 mm x 125 mm (00824)
1x Screwdriver SoftFinish® electric Slotted 5.5 mm x 125 mm (00826)
1x Screwdriver SoftFinish® electric Phillips PH1 x 80 mm (00847)
1x Screwdriver SoftFinish® electric Phillips PH2 x 100 mm (00848)
1x Professional electric diagonal cutters with DynamicJoint® 160 mm, 6 1/2" (43335)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	55.96 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Electrician, Screwdriver, Heavy-Duty Diagonal Cutters, 6 Pieces in Tool Folder

WIHA

Increases your efficiency: Compact and space-saving tool range.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Design: VDE tools with insulation up to 1,000 V AC, GS tested.

Design: Pocket size approx. 31 x 24 x 4 cm.

Design: High quality tools in a practical toolbag.

Design: Individually tested for electrical safety in accordance with IEC 60900:2012.

The 6-pc. tool set provides the basic kit for the most common applications for electricians. Featuring a zip, carrying handle and pockets for hand tools, the fully folding tool bag provides plenty of storage space and an orderly arrangement. The insulated SoftFinish® electric slimFix screwdrivers easily reach even low-lying screws and spring elements thanks to their very slim blades. Also insulated, the heavy-duty diagonal cutters with DynamicJoint® technology, a unique joint design for optimum hand force transmission, complete the equipment assortment in this tool bag.

Content:

1x Screwdriver SoftFinish® electric Slotted 3.5 mm x 100 mm (00822)
1x Screwdriver SoftFinish® electric Slotted 5.5 mm x 125 mm (00826)
1x Screwdriver SoftFinish® electric Phillips PH2 x 100 mm (00848)
1x Needle nose pliers Professional electric with cutting edge straight shape 200 mm, 8" (26727)
1x Professional electric diagonal cutters with DynamicJoint® 160 mm, 6 1/2" (43335)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	75.73 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Electrician, Screwdriver, Heavy-Duty Diagonal Cutters, 8 Pieces in Tool Pouch

WIHA

Increases your efficiency: Compact and space-saving tool range.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.

Design: VDE tools with insulation up to 1,000 V AC, GS tested.

Design: Pocket size approx. 31 x 24 x 4 cm.

Design: High quality tools in a practical toolbag.

Design: Individually tested for electrical safety in accordance with IEC 60900:2012.

The 8-pc. tool set provides the basic kit for the most common applications for electricians. Featuring a zip, carrying handle and pockets for hand tools, the fully folding tool bag provides plenty of storage space and an orderly arrangement. The insulated SoftFinish® electric slimFix screwdrivers easily reach even low-lying screws and spring elements thanks to their very slim blades. Also insulated, the heavy-duty diagonal cutters with DynamicJoint® technology, a unique joint design for optimum hand force transmission, complete the equipment assortment in this tool bag.

Content:

1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
1x Screwdriver SoftFinish® electric slimFix Slotted 4.0 mm x 100 mm (35390)
1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
1x Screwdriver SoftFinish® electric slimFix Phillips PH2 x 100 mm (35394)
1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ2 x 100 mm (35396)
1x Screwdriver SoftFinish® electric slimFix PlusMinus/Pozidriv SL/PZ2 x 100 mm (36330)
1x Heavy-duty diagonal cutters Professional electric with DynamicJoint® with switchable opening spring 160 mm, 6 1/2" (40921)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	87.33 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set ESD, Pliers, Screwdriver, Tweezers, 10 Pieces in Tool Pouch

WIHA

Application: The most important tools for hand assembly of electronic components and re-work activities.

Design: Robust and space-saving storage of tools in ESD-capable bag.

Design: ESD tools manufactured according to IEC 61340-5-1.

Content:

1x Professional ESD needle nose pliers straight 120 mm, 4 3/4" (26799)
1x Professional ESD diagonal cutters wide, pointed head without bevelled edge 115 mm, 4 1/2" (26821)
1x Universal tweezers Professional ESD Type AA 130 mm (32318)
1x Fine screwdriver PicoFinish® ESD Slotted 2.0 mm x 40 mm (43670)
1x Fine screwdriver PicoFinish® ESD Slotted 2.5 mm x 50 mm (43671)
1x Fine screwdriver PicoFinish® ESD Phillips PH0 x 50 mm (43677)
1x Fine screwdriver PicoFinish® ESD Phillips PH00 x 40 mm (43676)
1x Fine screwdriver PicoFinish® ESD TORX® T5 x 40 mm (43698)
1x Fine screwdriver PicoFinish® ESD TORX® T6 x 40 mm (43699)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	165.20 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Mechanic, Mixed, 31 Pieces in Tool Pouch

WIHA

Application: Selected stock for most common applications.

Design: High-quality tools in practical tool bag with carrying handle.

Design: Bag format: 33 x 27 x 6 cm.

Design: Weight 2100 g.

Content:

1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 3.0 mm x 100 mm (00687)
1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 5.5 mm x 125 mm (00698)
1x Screwdriver SoftFinish® Phillips with round blade PH1 x 80 mm (00756)
1x Screwdriver SoftFinish® Phillips with round blade PH2 x 100 mm (00759)
1x Screwdriver with T-handle and bit holder magnetic 1/4" 150 mm (01481)
1x Diagonal cutters Classic with DynamicJoint® 160 mm, 6 1/2" (43332)
1x Water pump pliers Classic box type 250 mm (26761)
1x Folding ruler Longlife 2 m metric, 10 segments 15 mm (27057)
1x Bit set FlipSelector Standard 25 mm Phillips, Pozidriv, TORX®, 14-pcs., 1/4" C6,3 (39040)
1x L-key set in Compact holder Hexagon brilliant nickel-plated 10-pcs. (01222)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	118.07 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Mechanic, Mixed, 32 Pieces in Tool Pouch

WIHA

Meets your requirements: Carefully selected tool ranges for the most common applications.

Increases your efficiency: Compact and space-saving tool range.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Application: Selected stock for most common applications.

Design: High-quality tools in practical tool bag with carrying handle.

Design: Bag format: 33 x 27 x 6 cm.

Design: Weight 2100 g.

This 34-pc. tool set provides a basic kit for the most common applications for mechanics. Featuring a zip, carrying handle and pockets for hand tools, the fully folding tool bag provides plenty of storage space and an orderly arrangement. With their award-winning ergonomic design, SoftFinish® screwdrivers and their range of different handle sizes ensure comfortable, fatigue-free screw fastening. Another highlight in this tool set is the ErgoStar L-key holder, which allows all L-keys to be conveniently removed with a single twist. The set also contains heavy-duty diagonal cutters with an opening spring and DynamicJoint® technology, a unique joint design for optimum hand force transmission. Water pump pliers with a Classic handle, a FlipSelector bit set and many other tools complete the equipment assortment in this tool set.

Content:

1x Screwdriver SoftFinish® Slotted with round blade and lasered mm scale 4.0 mm x 100 mm (36085)
1x Screwdriver SoftFinish® Slotted with round blade and lasered mm scale 5.5 mm x 125 mm (35397)
1x Screwdriver SoftFinish® Phillips with round blade and lasered mm scale PH1 x 80 mm (36072)
1x Screwdriver SoftFinish® Phillips with round blade and lasered mm scale PH2 x 100 mm (35398)
1x L-key with ComfortGrip T-handle and two bit holders 1/4" magnetic 150 mm (26179)
1x Combination pliers Industrial with DynamicJoint® and OptiGrip with extra long cutting edge 200 mm, 8" (32319)
1x Heavy-duty diagonal cutters Industrial with DynamicJoint® with switchable opening spring 180 mm, 7" (41272)
1x Water pump pliers Classic with push button 250 mm (26765)
1x Bit set FlipSelector Standard 25 mm Phillips, Pozidriv, TORX®, 14-pcs., 1/4" C6,3 (39040)
1x L-key set in ErgoStar holder Hexagonal ball end MagicRing® matt chrome-plated 10-pcs. (37351)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	225.09 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Legs for Tool Case XXL III (Wheel Side)

WIHA

Spare legs for the tool case XXL III. The set contains 1 spare leg incl. connection element. Only suitable for the legs on the side of the wheels of the tool case XXL III. Contains 1 unit.

Select to compare

Configure now
Starting from^∗ ：	154.99 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Mechanic, Screwdriver, Combination Pliers, 7 Pieces in Tool Pouch

WIHA

Simplifies your work: A secure, non-slip grip in all common work situations thanks to the Wiha combination pliers.

Increases your efficiency: Compact and space-saving tool range.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Application: Selected stock for most common applications.

Design: High quality tools in a practical toolbag.

Design: Pocket size approx. 31 x 24 x 4 cm.

Design: Weight 875 g.

Content:

1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 3.5 mm x 100 mm (00691)
1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 4.5 mm x 125 mm (00697)
1x Screwdriver SoftFinish® Slotted with round blade 6.5 mm x 150 mm (00703)
1x Screwdriver SoftFinish® Phillips with round blade PH1 x 80 mm (00756)
1x Screwdriver SoftFinish® Phillips with round blade PH2 x 100 mm (00759)
1x Combination pliers Industrial with DynamicJoint® and OptiGrip with extra long cutting edge 180 mm, 7" (30826)
1x Tool kit

Select to compare

Configure now
Starting from^∗ ：	53.40 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Set Service Technician, Assorted 30 Pieces in Bag

WIHA

Meets your requirements: Carefully selected tool ranges for the most common applications.

Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.

Increases your safety: Internationally award-winning VDE-insulated tools, each individually tested at 10,000 V AC and approved for use at 1,000 V AC.

Increases your efficiency: Compact and space-saving tool bag can be removed from the complete set and used separately.

Application: Basic equipment for the service technician.

Application: Suitable for electrical and electronic maintenance work on machines and components.

Application: For work in the area of live parts up to 1,000 V AC.

Design: Combined laptop bag/ toolbag; ideal for the service technician.

Design: Can be completely folded open with zipper.

Design: Several pocket compartments for hand tools, laptop and documents.

Design: Sufficient space for individual additional equipment.

Design: Tool side bag, can be removed and used separately thanks to zip fastening.

Design: Laptop bag suitable for all common laptops.

Design: Bag format: approx. 47 x 35 x 22 cm.

Design: Weight 5000 g.

Content:

1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
1x Screwdriver SoftFinish® electric slimFix Phillips PH1 x 80 mm (35393)
1x Screwdriver SoftFinish® electric slimFix Phillips PH2 x 100 mm (35394)
1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ1 x 80 mm (35395)
1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ2 x 100 mm (35396)
1x PicoFinish® fine screwdriver Slotted 1.5 mm x 40 mm (42384)
1x PicoFinish® fine screwdriver Slotted 2.0 mm x 40 mm (42388)
1x PicoFinish® fine screwdriver Slotted 2.5 mm x 50 mm (42391)
1x PicoFinish® fine screwdriver Slotted 3.0 mm x 50 mm (42394)
1x PicoFinish® fine screwdriver Phillips PH00 x 40 mm (42402)
1x PicoFinish® fine screwdriver Phillips PH0 x 50 mm (42401)
1x Switch cabinet key cross shape 7.0 mm- 9- 5 - 8- 3 - 5 (36114)
1x L-key set in Compact holder Hexagonal ball end matt chrome-plated 10-pcs. (01418)
1x Professional electric diagonal cutters with DynamicJoint® 160 mm, 6 1/2" (43335)
1x Needle nose pliers Professional electric with cutting edge straight shape 200 mm, 8" (26727)
1x Electronic needle nose pliers narrow, short head straight form 135 mm, 5 1/3" (26801)
1x Electronic diagonal cutters wide, pointed head and wire trapping spring without bevelled edge 130 mm, 5 1/8" (26825)
1x Automatic stripping tool up to 6 mm² 190 mm, 7 1/2" (44617)
1x Stripping tool with self-rotating drag blade for round cables 165 mm (44618)
1x Voltage tester SoftFinish® single-pole, 110-250 volts Slotted transparent, with push-on clip 3.0 mm (34745)
1x Toolbag (mechanics/electricians)

Select to compare

Configure now
Starting from^∗ ：	376.00 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Upper Tool Panels for Tool Case XXL III

WIHA

Application: For organization and safe storage of the tools.

Spare tool panels for the upper section of the tool case XXL III from Wiha. Contains 3.

Select to compare

Configure now
Starting from^∗ ：	97.88 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Wall Box Installation Tool Set, 23 Pieces in Multifunctional Bag

WIHA

Simplifies your work: All tools securely arranged in a robust, orderly bag.

Increases your efficiency: 4 in 1: round stripper, longitudinal stripper, hook knife and stripping station in one tool.

Increases your efficiency: Clean work thanks to cable cutting without crushing.

Increases your efficiency: The correct torque protects material from damage and means no follow-up work.

Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Application: Insulated tools for working on charging stations and wall-mounted vehicle charging equipment.

The mounting and installation of wallboxes require special qualifications from the employees as well as safe, certified equipment. With the tool set, the user always has the right tool at hand. Safely stored and tidy in a robust multifunctional bag, these electrician's tools are perfectly suited for mobile use. As holder of a design patent, the bag from Wiha inspires with its multifunctional usability. When unfolded, it functions as a work bench stand for easy retrieval of the tools. The strap for hanging the bag on the wall and the removable base provide additional value. With its versatile interchangeable bit system, the tool set offers optimum space saving. Thanks to Wiha slimTechnology, the included slimBit blades are up to 33% slimmer and can thus easily reach low-lying screw and spring elements. In combination with the extra-short Stubby handle, screws can be effortlessly reached, even in confined spaces. The set contents can be used in a variety of ways, so you will always find the right tool, even when working at a distribution cabinet. Each tool in the set has undergone individual piece testing as per international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.

Tested according to IEC 60900.

Content:

1x Screwdriver with bit holder SoftFinish® electric slimVario Stubby
1x Screwdriver with bit holder SoftFinish® slimVario® electric
1x Torque screwdriver TorqueVario®-S electric variably adjustable torque limit
1x Universal key with double joint with triangular heads, square heads and double bit 7-9- 5 - 8- 3 - 5 (44001)
1x Stripping multi-tool for round cables 125 mm, 5" (44242)
1x Cable cutter Professional electric with switchable opening spring 210 mm, 8 1/4" (43662)
1x Needle nose pliers Professional electric with cutting edge curved shape, approx. 40° 200 mm, 8" (26729)
1x Extension slimVario® electric for slimBits 6.0 mm (43292)
1x Setting tool for torque screwdriver with long handle 90 mm (26864)
1x Adapter TorqueVario-S electric for slimBits 6.0 mm (35870)
1x slimBit electric bit Phillips PH1 x 75 mm (34583)
1x slimBit electric bit Phillips PH2 x 75 mm (34584)
1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
1x slimBit electric bit TORX® T20 x 75 mm (35509)
1x slimBit electric bit TORX® T25 x 75 mm (36071)
1x slimBit electric bit Hex 2.5 mm x 75 mm (37224)
1x slimBit electric bit Hex 3.0 mm x 75 mm (37147)
1x slimBit electric bit Hex 4.0 mm x 75 mm (37225)
1x slimBit electric bit Hex 5.0 mm x 75 mm (37226)
1x Functional bag Empty (43474)

Select to compare

Configure now
Starting from^∗ ：	307.83 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Wheel Bracket for Tool Case XXL III (Front Side)

WIHA

Application: For attaching the wheel of tool case XXL III on the front side.

Spare wheel bracket for the tool case XXL III from Wiha. May only be used for the wheel on the front side. Contains 1.

Select to compare

Configure now
Starting from^∗ ：	65.25 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Wheel Bracket for Tool Case XXL III (Rear Side)

WIHA

Application: For attaching the wheel of the tool case XXL III on the rear side.

Spare wheel bracket for the tool case XXL III from Wiha. May only be used for the wheel on the rear side of the case. Contains 1.

Select to compare

Configure now
Starting from^∗ ：	65.25 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Wheel Cover for Tool Case XXL III

WIHA

Application: Protects the wheels from damage and enhances the length of their service life.

Spare wheel cover for the tool case XXL III of Wiha. Equally suited for right-side and left-side wheels. Contains 2.

Select to compare

Configure now
Starting from^∗ ：	16.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Wheel for Tool Case XXL III

WIHA

Application: For the convenient moving of the tool case XXL III. With the extra large wheel the tool case can also be pulled across rough terrain or up and down stairs.

Spare wheel for the tool case XXL III from Wiha. Contains 1.

Select to compare

Configure now
Starting from^∗ ：	48.95 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Tool set and tool box only
Toolbox Type
Tool set type
Case Size (Frontage x Depth x Height)(mm)
Set Content(Point)
Case color
Insertion Angle(mm)
Mass(g)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA	WIHA
Product Series	Handle for Tool Case XXL III	Lid for Tool Case XXL III	Rear Connector for Tool Case XXL III	Rubber Tips on the Body of Tool Case XXL III	Rubber Tips on the Legs of Tool Case XXL III	slimBit Box, Empty	slimBit Box, Empty, 2 Pieces with Belt Clip	Stand Leg Joint Cover for Tool Case XXL III	Tool Backpack Mechanic, 41 Pieces	Tool Case Basic Set L Electric, 18 Pieces	Tool Case XXL III, Empty	Tool Panel Lock for Tool Case XXL III	Tool Set Electrician Competence XL, Assorted 81 Pieces in Case	Tool Set Electrician, Mixed 13 Pieces in Tool Pouch	Latch for Tool Case XXL III	Legs for Tool Case XXL III (Extendable Handle Side)	Tool Set Electrician, Mixed 18 Pieces in Belt Pouch	Tool Set Electrician, Mixed 32 Pieces in Tool Pouch	Tool Set Electrician, Screwdriver, Diagonal Cutters, 7 Pieces in Tool Pouch	Tool Set Electrician, Screwdriver, Heavy-Duty Diagonal Cutters, 6 Pieces in Tool Folder	Tool Set Electrician, Screwdriver, Heavy-Duty Diagonal Cutters, 8 Pieces in Tool Pouch	Tool Set ESD, Pliers, Screwdriver, Tweezers, 10 Pieces in Tool Pouch	Tool Set Mechanic, Mixed, 31 Pieces in Tool Pouch	Tool Set Mechanic, Mixed, 32 Pieces in Tool Pouch	Legs for Tool Case XXL III (Wheel Side)	Tool Set Mechanic, Screwdriver, Combination Pliers, 7 Pieces in Tool Pouch	Tool Set Service Technician, Assorted 30 Pieces in Bag	Upper Tool Panels for Tool Case XXL III	Wall Box Installation Tool Set, 23 Pieces in Multifunctional Bag	Wheel Bracket for Tool Case XXL III (Front Side)	Wheel Bracket for Tool Case XXL III (Rear Side)	Wheel Cover for Tool Case XXL III	Wheel for Tool Case XXL III
Starting from^∗	48.95 € *Unit price with basic configuration	130.49 € *Unit price with basic configuration	32.63 € *Unit price with basic configuration	40.79 € *Unit price with basic configuration	24.47 € *Unit price with basic configuration	4.11 € *Unit price with basic configuration	12.32 € *Unit price with basic configuration	16.32 € *Unit price with basic configuration	426.67 € *Unit price with basic configuration	374.64 € *Unit price with basic configuration	758.39 € *Unit price with basic configuration	32.63 € *Unit price with basic configuration	862.83 € *Unit price with basic configuration	211.81 € *Unit price with basic configuration	48.95 € *Unit price with basic configuration	122.35 € *Unit price with basic configuration	230.52 € *Unit price with basic configuration	215.87 € *Unit price with basic configuration	55.96 € *Unit price with basic configuration	75.73 € *Unit price with basic configuration	87.33 € *Unit price with basic configuration	165.20 € *Unit price with basic configuration	118.07 € *Unit price with basic configuration	225.09 € *Unit price with basic configuration	154.99 € *Unit price with basic configuration	53.40 € *Unit price with basic configuration	376.00 € *Unit price with basic configuration	97.88 € *Unit price with basic configuration	307.83 € *Unit price with basic configuration	65.25 € *Unit price with basic configuration	65.25 € *Unit price with basic configuration	16.32 € *Unit price with basic configuration	48.95 € *Unit price with basic configuration
Min. Shipping Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	3 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days
Tool set and tool box only	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Toolbox Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool set type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Case Size (Frontage x Depth x Height)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Set Content(Point)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Case color	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Insertion Angle(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mass(g)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-